Industry Products

The SSW Detect Switch has many attributes, such as Electric Parking Brakes (EPB) and x-by-wire, which each require functional safety in accordance with the ISO 26262 automotive standard, as well as any other applications where low-level signals are used.

The first OmniCore variants are designed to help integrate robots into the digital factory ecosystem, whether manufacturers need standardized motion control or more tailored solutions.

At the core of v16 is the PCM5 controller. It has a touchscreen interface for troubleshooting, fanless cooling, and embedded cyber security that is auto-configured and enabled by default.

Nymi Enterprise Edition authentication is a solution consisting of a multi-factor biometrically authenticated wearable (the Nymi Band) and a complete enterprise system for administration, management and integration into existing identity ecosystems.

The Model 71865 functions include two A/D acquisition IP modules for simplifying data capture and transfer. Each acquisition IP module contains a controller for all data clocking, triggering and synchronization functions.

This voice coil motor has a force to size ratio of 5.5 lbs (24.6 N) continuous force and 17.5 lb (77.7 N) of peak force with a housing measuring 2.000 in. (50.8 mm) dia. x 3.50 in. (88.9 mm) long.

CONTA-CLIP provides KDS-FB in four frame widths and with different divisions for flat and round cables. Sealing elements are available for all common industrial cable sizes.

The BML SF2 incremental encoder system is available with industry-standard A/B/Z quadrature or analog sine/cosine interfaces and is available in operating lengths of up to 48 meters.

The new integration to the EPLAN Cloud is available starting with Version 2.8. Designers can make the schematic project available in the cloud from the platform for downstream company processes.

Fitted with a 7th Generation Intel Core processor (Kaby Lake) and featuring up to 16GB DDR4 SODIMM memory, the PICO-KBU4 has the computing power to handle applications previously only possible with larger motherboards.

his technology allows FOC (field oriented control) for brushless motors without sensors from full stop to full speed under load. This HPSC uses a signal injection algorithm which determines the rotor position for a smooth startup.

Designed with an integral chuck to maximize work-zone volume and load capacity, the D200Z accommodates workpiece sizes up to 300mm in diameter and 210mm tall with weight up to 75 kg.

The Simatic RTU3000C telecontrol units are specially designed for energy-autonomous operation in environments without a power supply system. They can be supplied with power redundantly, for example with up to six battery modules or rechargeable battery with solar panel.

This latest edition of DriveWare now includes stepper motor configuration, allowing users to configure drives to run stepper motors in addition to the servo motors that were previously supported.

The automated thread checking solution from SMAC enables a detailed inspection and verification of all parts. It also identifies tool wear, and allows SPC data acquisition for process control and quality systems.

The SW-4000T-MCL features three custom CMOS line sensors with 4K (4096 pixels) resolution, mounted on anoptical prism assembly that precisely splits the incoming light into red, green, and blue wavebands.

The W16 and W26 were designed as smart sensors so they can be configured remotely via IO-Link. As smart sensors, W16 and W26 also offer additional diagnostic functions that can be used to predict maintenance and other smart tasks.

This KADL cable entry system allows for the insertion and sealing of pre-assembled cables with connectors into enclosures, machines and control cabinets.

Powered by an Intel Atom E3900 Series processor, the COM-APLC6 is designed for modern IoT applications. The module features two SODIMM sockets that support DDR3L-ECC memory.

The integral dust containment system provides operator access to the bag spout for connecting a full bag or disconnecting an empty bag, within a Dust Containment Box. Operator access to a positive shutoff valve to turn flow from the bag on and off as needed is provided within the Dust Containment Box.

The switches are designed to operate in harsh environments with varying climatic and environmental conditions, and is intended for digital substations, transportation and oil & gas industries.

The MiR500 is the same size as a standard Euro-pallet (47.2 in × 31.5 in × 5.7 in), and MiR expects that most MiR500s will be used to transport pallets in manufacturing floors and warehouses.

By implementing the iQ Monozukuri Andon system, all stakeholders within the factory can visualize the production status. It allows production managers to monitor the production status remotely and adjust the production plan accordingly. They can also set up announcements for changeovers.

Featuring a spiral bevel gear input to an inline planetary gear output, the EPR and PER are available in ratios of 3:1 to 1000:1 and a wide range of sizes and configurations.

The field controller can be used on its own or with a PowerFlex DC digital drive. In stand-alone mode, it provides power to a DC motor field with a fixed reference by using fixed I/O.

This latest release extends its existing Incoming & In-Process Quality Assurance capabilities to deliver Administrative Quality Management. Administrative Quality Management provides a total solution covering Corrective Action and Preventive Action (CAPA), Material Review Board (MRB), and Failure Reporting, Analysis, and Corrective Action System (FRACAS).

Chipkin’s BACnet Stack (CAS BACnet Stack) is a software library that allows users to add a native BACnet interface to embedded devices or applications.

These BES R01 flatpack sensors are designed to help to combat the conditions found in welding environments.

The platform’s connectivity and bandwidth deliver data back to the controller. This helps future-proof control systems for a Connected Enterprise. It is built on a 1 Gigabit architecture with communications supporting Device Level Ring (DLR), linear and star topologies.

The MXL2 with AMP includes two components produced by GE’s Additive Manufacturing Works (AMW) teams in Birr, Switzerland, and Greenville, South Carolina, United States: the first-stage turbine vanes and heat shields.