Industry Products

To assure longevity in demanding applications such as steel-, mining- or construction -hydraulics the Gemco 958A Compact Housing LDT is designed to deliver tolerances of 1,000Gs shock resistance and 30Gs vibration resistance.

They support system-wide diagnostics, configuration changes and plant expansions during operations as well as the construction of redundant networks.

The EDD-3701x can interface with Galil masters (DMC-500x0 and DMC-52xx0) for sophisticated applications or with TwinCAT for simple applications

This signal routing software works to simplify signal routing through complex switching systems and speed up the development of switching system software.

Balluff's break-off magnetic mount with tag holder allows for integration of RFID systems. Using a magnetic connection, they are designed for presses where frequent tool or size changes are required.

The PD2-C-IP is available as a brushless DC motor, with an operating voltage of 12-48 V and a rated power of 105 W, and as a stepper motor with a nominal torque of up to 0.5 Nm.

Using an eWON Cosy with a 4G cellular connection allows users to access their machinery in remote places where Ethernet is not available.

The DT-FD series provides a sensing window and the ability to safely monitor circuits with voltages up to 1500 VDC, and up to 400 amps. The sensor can be mounted on a DIN rail or attached to a back panel with screws.

These Cat5e, Cat6 and Cat6a tool-less jacks were designed with an easy termination design. Each jack is color coded for both the EIA/TIA568 A and B standards.

Based on the measurement of cavity pressure with sensors from Kistler, users are provided with modular functions to support predictive control of the injection molding process. Support, monitoring, control and prediction make Version 2.1.0 of Kistler's ComoNeo a tool for process transparency.

Support for the vendor-neutral standard is provided through the FactoryTalk Linx communications software, which allows Rockwell Automation and third-party products to exchange data.

The installation of ST50 Series Flow Meters in the process control loops of industrial air blower and dryer systems provides hot air flow rate monitoring. The use of mass flow meters ensures rate of flow measurement and totalized flow measurement for zone control and overall system operational efficiency.

The THM 20 series are a solution not only for medical equipment but also for ITE applications such as transportation, control & measurement or IGBT drivers.

The AIOT-MSSP01 comprises two connected boards. The main board houses the MCU host, six USB ports and a further internal USB connector. The upper, I/O board handles the majority of the vending functions.

The upcoming Version 2.8, which is anticipated to be available starting in late summer 2018, will be usable as a completely cloud-based Software as a Service (SaaS)

Series 320 is designed for safety critical applications in the medical, aerospace, precision electronics, and automotive markets.

One of the features of the EDS-P506E-4PoE is its Smart PoE software that facilitates web accessible PD diagnostics and management. It helps end-users achieve automatic PD detection of power class, status, and errors for diagnostics, while checking for device failure.

Made entirely from stainless steel, the LDTs can be used in food and caustic applications, They can withstand cold water power washing for use in agricultural and other challenging environments. Programmable zero and span points allow users to adjust the output to exactly match their requirements.

The RSE300 and RSE600 cameras continuously stream up-to-60 frames of data per second, allowing for detailed monitoring of temperature patterns and variances.

AutomationDirect VFD cables utilize cross-linked Polyethylene (XLPE) conductor insulation with Class K, flexible stranded tinned annealed copper conductors. XLPE insulation

Tricon CX version 11.3 is designed to meet stringent requirements for safety, cybersecurity, risk reduction and continuous operation in the oil and gas, refining, petrochemicals, power and other high-hazard industries.

The IntelliCENTER Integration Unit integrates the intelligent electrical devices from an electrical distribution system into the process-automation control and software environment. Integrating both systems into a single control and software platform avoids the need for a separate eSCADA and gives process and electrical operators a single, unified view of their data.

Designed specifically for an electrician’s DMMs, clamps, tools, and accessories, the backpack also protects tools in dirty work sites. For the digital user, the Fluke Pack30 offers a way to carry all the necessary tools while keeping hands free to use cell phones and tablets.

MINMAX Technology's DC-DC converter family consists of MDWI08 series of 8W Isolated / Regulated DC-DC converters, MDW08 series of 8W Isolated Regulated DC-DC converters, MDWI06 series of 6W Isolated / Regulated high power density DC-DC Converters, and MDWI10 Series of 10 Watt DC-DC converters.

The SV102 is a precision pressure regulator, and the SV22 and SV28 are high flow electronic valves.

The HT-1000 LVDTs provide a ratiometric output for reduced thermal error . In addition to offering linearity of ±0.5% of full range, the HT-1000 AC-LVDTs offers mechanical and electrical life as well as the absence of friction and contact between the core and coil.

Applications for both include high demands on dynamics, precision, smooth scan motion, short settling times, and low tracking error, such as laser cutting, scanning, digital printing, electronics assembly and inspection, AOI (Automatic Optical Inspection), automation, and flat panel manufacturing.

The CFO100 and CFO200 True Color sensors recognize any color whether it is for painting technology, automation systems, medical packaging, quality control, surface-labelling, and printing technology tasks. The sensors can now be accessed using the web interface from Micro-Epsilon.

Dedicated options are added in translator to bridge 2D&3D design. ZW3D 2018 SP enables users to export the view of each component as a block in DWG format.

Incorporating web and mobile technology, OSI Compass is designed to enable utilities to assign work to field technicians, improving safety, communication, and documentation