Industry Products

PowerGate H is fully compatible with earlier generations of Mitsubishi Electric controllers and meets the requirements of the most demanding applications. It can be used with either conventional induction motors or with the latest generation internal permanent magnet (IPM) motors.

The PolyOil JAR Handling Clamp acts a safety device to prevent the jar from cocking and firing. Applications for the new JAR Handling Clamp include drilling, drill stem testing (DST) jars, coil tubing and wireline applications.

Designed for high-temperature and hydrogen applications, the CGS-FlexVu UD10 system performs as a gas detector, display and controller for the detection of both hydrocarbon and hydrogen gases.

The Stafford 3-D Positioning System consists of a group of mounting components, including a base which can securely attach to any flat surface, stepped and straight-through couplings, and precision shafting that can be adjusted and locked.

These modules are single or dual 6-channel multiplexers with relays mounted on the front panel. They are suitable for switching 50Ω signals up to 50GHz. The single slot version can support up to three remotely mounted multiplexers

The LVS-9585 Handheld Portable Barcode Verifier provides verification of both printed labels and direct part marks (DPM). 1D and 2D direct part marks are created using methods such as laser etching, chemical etching, and dot peen marking on a variety of surfaces including metals, plastics, ceramics, and composite materials.

Series 8050 is a horizontal entry clamp in 2.5-mm pitch, available either as a two or three-pole version.

The cameras are “powered over Ethernet“ and particularly developed for the factory automation, e.g. for robot plant construction and mechanical engineering.

The expanded G3 and 580 Series platforms feature process control architecture that permits the design engineer or end-use specifier to optimize the size of the control cabinet for the number of required valves.

The VersaView 5000 portfolio, part of the Rockwell Automation scalable compute offerings, includes five products: VersaView 5400 display and nondisplay computers; VersaView 5200 display and nondisplay thin clients; and VersaView 5100 monitors.

Designed specifically for flow measurement in round pipes or stacks of 12 inches [300 mm] and larger diameter, and square or rectangular ducts with cross sectional area of 100 inches [250mm] and larger, the model ST102A Flow Meter and the new MT100 Series Flow Meters from Fluid Components International (FCI) provide two to eight non-clogging, no moving parts sensing points.

The HI 6600 series is designed to support weighing applications in process and packaging such as inventory management, blending, filling and checking.

AICSYS Inc Industrial Automation Hardware manufacturer launched Fanless LPC-Series, a waterproof full IP65 compliant 6-sided sealed stainless steel chassis to prevent acid, liquid, and dust from damaging the Panel PC device and offers a sophisticated glossy and shiny surface.

The FWA6706R is an entry-level network appliance in a 1U-rackmount form factor, with a smart fan solution. It is designed to ensure stable deployment in network environments for small to medium-sized enterprises.

Forming part of the latest version of NUM’ Flexium+ software (V4.1.00.00), the tool management facility provides an accessible database that can either be installed on a server platform for use with multiple CNC machine tools in a large production plant, or can be used standalone on a single CNC machine tool.

Softing’s dataFEED OPC Suite combines a full package of components for OPC and IoT cloud communication within a single product. In addition to the integrated REST interface, the MQTT gateway and OPC UA support enable integration of legacy and new controllers into cloud solutions such as Microsoft Azure or IBM Bluemix.

Through the employment of integrated hardware and sensors, and a proprietary compensation algorithm implemented via Aerotech’s A3200 controller software, ThermoComp works to minimize stage inaccuracy due to thermal effects even over extreme temperature ranges.

Designed for meeting small footprint requirements with high-energy handling capabilities, these pluggable devices include local and remote status indicators, and reversible keyed plugs and bases for maintenance

Powered by Intel Xeon E3 v5 or 6th Gen Core processor with C236 chipset, Nuvo-6108GC supports up to 32GB ECC/ non-ECC DDR4 memory and has rich I/O ports such as Gigabit Ethernet, USB3.0, video ports and serial ports.

The IMP-C1000-SFP series is designed for outdoor applications such as factory automation, security, ITS transportation, power/utility, water wastewater treatment plants, and any other ambient weather environments.

The SAM D5/E5 microcontrollers combine the performance of an ARM Cortex-M4 processor with a Floating Point Unit (FPU). This combination offloads the Central Processing Unit (CPU), increasing system efficiency and enabling process-intensive applications on a low-power platform

The Cortet Z10 Range Extender is a way to extend the range and/or capacity of a zigbee network within large facilities or facilities with a poor RF environment. The Z10 Range Extender is capable of distances greater than 325 feet (100M) in interior environments.

AXISLib 2.6 enables users of Abaco’s SBC347D – based on the Intel Xeon-D processor - as well as Abaco’s entire family of platforms based on latest generation Intel Core i7 processors - to take advantage of the performance these processors.

A pluggable terminal block is composed of a plug and a mating socket. The socket is usually attached to a printed circuit board through pins. The plug fits into the socket, and the wires connect to the socket via Dinkle’s patented push-in-design.

The Simatic Process Device Manager forms the basis for data and status monitoring of smart field devices in the maintenance station. Simatic PDM is a universal, manufacturer-neutral tool used for project engineering, parameterization, commissioning and monitoring of intelligent field devices and field components

The AS-FT Flow Transmitters from FCI Aerospace are designed to meet the demand for full qualification compliance with the performance and measurement capability necessary to serve a variety of aircraft air/gas/fluid flow applications.

The fanless IIoT gateway supports the NXP (Freescale) i.MX6UL ARM Cortex-A7 528MHz SoC. It offers a combination of features that make it suitable for a variety of challenging applications including transportation, heavy-duty industrial use, smart factory, smart grid, etc.

Also known as an electric cylinder, this direct drive linear motor is 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.

The CD80 Chlorine Dioxide Analyzer from ECD is designed to provide process engineers responsible for municipal and industrial water treatment systems with a solution to measuring Chlorine Dioxide (ClO2) for disinfection, effluent treatment, pulp bleaching and cooling or rinse water applications.

The eTOP310 comes in 3 different front panel colors: White (Stock), Black (Special Order), and Metallic Silver (Special Order),which will help match or dress up any machine panel.