Industry Products

The LNX-1202G-10G-SFP is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

Designed for a variety of applications including asset management, data acquisition, environmental monitoring and facility management, the SeaConnect 370 originally emerged as a solution for sign monitoring and notification.

The network security platform features six Gigabit Ethernet ports using Intel i211 Ethernet controller, and one pair of LAN bypass function.

The V-731 is equipped with incremental linear encoders for direct position measurement and 3-phase electromagnetic linear motors. Fields of application include micro-assembly, biotechnology, precision laser machining, optics, lens testing, and photonics alignment.

With S-mount lens holder, the See3CAM_CU135 is a solution for Medical applications such as digital microscopy, Document Scanning cameras, Optical Character Recognition applications, smart surveillance, smart parking lot management applications, high-resolution Microscopic/Magnification applications, Drones etc.

The HART Multiplexer System by GM International is designed to offer the possibility to reduce the number of multiplexer modules, while maintaining ability to control up to 7936 channels.

RTVN version 18.0 is designed to advance the company’s vision to provide intelligent consumer-driven business networks to organizations across a range of vertical markets, including Retail, CPG, Electronics, Automotive, Defense, Pharmaceutical, Healthcare, and Logistics Services.

The ID/MV-30 includes USB connectivity, and may be plugged directly into the PC to power and go. The ID/MV-40 features Ethernet connectivity and a separate power supply.

The sensors with a cable outlet are provided with a cable suitable for E-chain use, and a semi-transparent LED ring at the sensor end, which shows the sensing state from any viewing angle. The sensors are IP67 rated, and have an operating temperature of -25 to 70 °C.

This family of serial device servers and gateways support most common industrial protocols, with various combinations of HART, HART IP, Profinet, Modbus TCP, Modbus RTU, Raw/ASCII, and EtherNet/IP.

The QF-50 is designed for optical positioning applications requiring precision and throughput coupled with long travels. It offers 400 μm closed loop and 450 μm open loop travel, 0.01% linearity, sub-nanometer resolution, and 4 nm bidirectional repeatability.

The Transport LCU, which is now available for supply, is installed inside the locomotive and serves as the controlling system for remote, wireless control movement of a locomotive through a railyard and is designed as a small space solution.

These controllers can drive up to 500A at 60V, or 300A at 96V respectively. This power capacity makes the controllers a solution for electric vehicles, material handling robots, electric boats or agricultural robots.

The Series is designed to facilitate multi-axis force, torque/axial and torsional load measurements within robotics, factory automation, machinery and tooling, agricultural and off-highway vehicle, and materials testing applications.

In the Han K32/55, the crimp contacts of the D series and D-Sub series are built into a single closed unit, allowing the connection of a maximum of 32 power contacts (10A 250V 4kV 3) and 55 signal contacts (4A 50V 4kV 3).

This 3.5” embedded SBC is a solution for IoT/M2M related applications, such as industrial automation, self-service terminals, digital signage, POS/kiosk displays, medical, and more.

The platform, for data acquisition common in machine-building applications, includes PROFINET master or slave operation, I/O configuration, and “last-breath” operation in the event of power failure.

With the TRENDview feature, operators and end users can view Single-point and Multipoint Trend Logs in a selectable list, in flexible layouts to maximize the amount of room for analog and digital data.

The device facilitates readout of flow volumes by showing liter or cubic meter measurements on a display that can be rotated for better visibility.

The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with FPGA technology for required extensive calculations.

The units are available with 3 standard travel ranges from 25 to 100mm in both open and closed-loop configurations. The closed-loop models incorporate a incremental encoder with nanometer resolution.

Hardy HI 6020 models use two core Hardy technologies: C2 electronic calibration and Integrated Technician (IT). Weighing applications include: batching/blending, filling/dispensing, level-by-weight, inventory management and product inspection.

This combination from Microchip Technology is designed to give customers the ability to increase their application’s color resolution and display size (up to 12 inches) with MCU-based resources and tools including the MPLAB Integrated Development Environment (IDE) and MPLAB Harmony software framework.

With features like megapixel cameras, integrated electronic access control, and perimeter intrusion detection with real-time central station monitoring, the systems are designed to meet the unique security demands of a manufacturing environment.

The Ex9S32 Manual Motor Starters are electro-mechanical devices that combine a number of functions in one unit, including disconnect for motor branch circuit, manual motor control, branch-circuit short circuit protection (magnetic protection), overload protection (thermal protection - Trip class 10) and switching (manual).

Up to six ECMs can be mounted on the MMS8010 3U VPX carrier, while the MMS6245 XMC can host up to four ECMs. ECMs can also be mounted on PMCs, such as the MMS5918.

NEXCOM has increased the industrial panel PC family with the addition of 15”, 15.6” and 21.5” sizes to meet the need of advanced human machine interface (HMI) terminals in automated manufacturing.

The LNX-2602G-SFP series is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh environments, such as, manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation. This switch is also designed for setting up a dedicated network for optimizing VoIP and video application.

Positioned at the heart of the company’s line scan cameras, this class of sensors enables monochrome, color, and near-infrared (NIR) imaging for document scanning, parcel sorting, glass, and wood inspection

To meet the demands of most industrial environments, the FID-11x series has a standard operating temperature range of -5° to +60°C and 3H pencil hardness.