Industry Products

Installed under the spark plug or head bolt for monitoring of engine performance and critical over-temperature conditions, the stem design allows for installation in high temperature areas with limited clearance.

These FDA/USDA/3-A Dairy compliant scraper seals are designed for pharmaceutical, medical, food, and dairy processing applications.

The technology fosters OT & IT collaboration for enterprise-wide protection of critical infrastructures such as power generation and distribution, water and wastewater, transportation systems and infrastructure like trains, bridges and tunnels, intelligent building management, manufacturing, oil and gas, and other applications that rely on high availability industrial automation.

This combination creates a full transceiver that can transmit and/or receive wide-bandwidth signals of up to 2 GHz of bandwidth in real time, covering spectrum from 27.5 GHz to 29.5 GHz

The LMS-180 is designed for applications where resolution and constant velocity is required, such as in optics inspection, metrology, photonics, interferometry, and semiconductor test equipment.

The SWM24 integrated steppers combine NEMA 24 step motors with a 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

The Ti450 SF6 allows utility crews to include it as a normal part of their maintenance routine, allowing them to conduct both infrared and gas inspections whenever and wherever necessary.

This ergonomically designed machine allows non-stop production for rolls up to 36” diameter and weighing up to 900 pounds. The splicer loads rolls directly from the floor without requiring any additional material handling equipment, by using a turreting roll lifting concept.

The cDAQ-9185 and cDAQ-9189 provide time synchronization with TSN to simplify and improve scalability of synchronized, distributed systems.

When installed straight out of the box, the Stratix 2500 industrial Ethernet switch can prioritize critical industrial network traffic. It also can be configured for application-specific needs.

The Honeywell Sotera platform will support connected worker offerings such as two-way communications, geo-location and automatic safety alerts to provide employers with real-time awareness of safety incidents and the ability to respond quickly if an employee is injured in a remote location.

Jabil’s InControl SaaS is a multi-tenant, intelligent digital supply chain cloud platform that provides connectivity, analytics and machine learning technologies to optimize real-time decision-making for supply chain practitioners.

The Vortab Company’s elbow flow conditioner nearly eliminates the flow meter upstream piping requirements by conditioning the flow stream into a flow regime, mimicking adequate straight run.

FCI’s ST75V Air/Gas Flow Meter offers an alternative solution for heat treating process control that provides direct mass flow measurement for accuracy, operates over a wide turn-down range and supports all common and specialty fuel gases.

The VG380 is offered in two package/interface options, VG380SA and VG380ZA. The VG380SA is a 41x48x22mm module designed for standalone applications, including built in power conditioning (compatible with power supplies from 9 – 32V), and with RS-232 / RS-422 interface.

IONI implements industry standard, torque, velocity and position controls for AC, brushless DC, brushed DC, linear servo motors and stepping motors between 2 W and 700 W power.

ATE Core Configurations deliver core mechanical, power and safety infrastructure designed to help users accelerate the design and build of automated test systems in industries ranging from semiconductor and consumer electronics to aerospace and automotive.

The NCA-1031, powered by the Intel Atom x7-E3950 or x5-E3930 processor, is a desktop form factor network appliance designed for entry-level network security, gateway or vCPE.

Perle IDS-500 PoE Industrial Managed Switches come with a PRO Feature Set to meet the needs enterprise-grade level environments where additional security and network integration functionality is required

The FS10i Flow Switch/Monitor features an air/gas sensitivity and setpoint range from 0.25 to 400 SFPS [0.076 to 122 MPS] and for water or liquids from 0.01 to 0.5 FPS [0.003 to 0.15 MPS].

The SWE440 provides an Ethernet-based system interconnect that allows single board computers, digital signal processors, graphics cards, sensor I/O cards and others to pass data at multi-Gigabit speeds

The PAC is Parker’s machine controls solution that combines PLC, HMI, and motion control functionality into a single device. Likewise, the PAC is programmed using a single integrated development environment (IDE) called Parker Automation Manager (PAM).

The Fluke 729 Automatic Pressure Calibrator is designed to simplify the calibration process by automatically generating precise test pressures, compensating for leaks, and automatically documenting the pressure calibration process to help meet compliance and regulatory requirements.

The 1.0 release of LabVIEW NXG is intended to help engineers performing benchtop measurements increase their productivity with nonprogramming workflows to acquire and iteratively analyze measurement data.

With its protocol configuration, mounting design, and interface, the SDS-3008 is a networking solution for virtually any Smart Factory application. It supports the core industrial protocols -- EtherNet/IP, PROFINET, and Modbus/TCP -- and includes built-in network monitoring and control functionality.

By wirelessly communicating with an iPad, Moku:Lab enables technicians, researchers, and students to interact with their experiment and stream data in real-time from anywhere in the lab.

This calibration verification system is designed to lower flow meter operating costs in flare gas applications aboard offshore platforms, at land-based oil/gas facilities and in petrochemical plants.

Distrix’s SDN technology, running on RAM devices, is designed to speed deployment of communication networks between industrial devices and IIoT cloud platforms, and deliver security for remote machine access.

Based on the ARM Cortex-A5 core with floating-point unit (FPU), with a 32-bit wide DDR controller that offers up to 1600MB/s of bandwidth, Matrix-710 is a choice for applications requiring computing and data processing.

Based on the QuadPod architecture from JTAG Technologies, the JT 2147/eDAK is an enhancement of JTAG ‘s current DAK interface and has been specifically designed for high-integrity ATE systems.