Industry Products

Fluke Condition Monitoring consists of wireless sensors and a gateway that receives signals from the sensors from up to 30 feet away and works with Fluke technologies, such as iFlex current probes, current clamps, temperature sensors and three-phase power monitoring.

IXARC encoders with the CANopen communications interface are a good choice for applications in vehicles, mobile machinery, cranes, lifts and offshore equipment.

EPLAN will conduct demonstrations of EPLAN Smart Wiring at the company’s booth (#1915) at Automation Fair, Nov 9-10 in Atlanta, presented by Rockwell Automation.

The Ethernet IP Marquee is a marquee sign that connects and communicates on the Rockwell Ethernet/IP network. The Ethernet IP Marquee has a built-in WEB server, eliminating the need to install software to program the sign.

With maximum continuous torque up to 98.5 mNm and higher stall torque, 22ECT motors are ideally suited for use in applications such as Industrial automation, power tools & robotics.

The modular Han-INOX connector series is designed for outdoor applications and use in the food industry and process technology.

The DRM-24V480W1PN has built-in active PFC and an efficiency of 94.17% typ. @ 230Vac. Additionally, the product also includes built-in DC OK contact; LED indicator for DC OK/ Overload; full power from -25°C to +60°C operation at 5,000m or 16,400 ft. altitude.

Standard features include EN 55022 B emissions, active power factor correction to EN 61000-3-2, I/O isolation of 4 kVAC, and up to 93% efficiency. a standby 5V output.

The Table Top Assembly System comes complete with sensors, controls, software and safety equipment to provide a virtual turn-key solution that can be up and running in 30 minutes

AVEVA Connect is a Software as a Service (SaaS) ecosystem for Engineering, Design and Information Management Products.

The Sirius 3RN2 replaces the preceding 3RN1 series, and with widths of 17.5 and 22.5 millimeters these relays require less space in a control cabinet. A standardized supply voltage reduces the number of versions.

When paired with a sensor, this lighting relay can provide occupancy-based on/off as well as daylight harvesting functionality. The relay can also be paired with a wireless light switch for localized control as well as dimming.

The E-727 is designed for multi-axis nanopositioning applications, such as 3D imaging in super-resolution microscopy, laser beam steering, and fast alignment applications.

the 700HPPK Pneumatic Test Pump Kit is a solution for generating high pressure in the field to devices under test (DUTs), such as transmitters, controllers, pilots, analog gauges, and more.

This range is suitable for the Oil & Gas and Specialty Chemical industries that need fast and efficient condensate removal.

EERAM is a standalone SRAM memory with shadow EEPROM back-up on a single chip that helps automatically retain contents of the SRAM memory when system power is lost.

APL vision inspection systems are designed for a broad spectrum of components. Quality control checks, OCR (optical character recognition) and batch sorting applications are a few examples. The systems have been developed to meet high speed quality control requirements for 100% inspection. Our experience with handling systems is key to offering a total solution when integrating vision software.

SureMotion MXL series timing belts are 1/4-inch wide, have a 0.080-inch pitch, and are available in neoprene with fiberglass reinforcement and urethane with polyester reinforcement styles. Also referred to as sprockets, MXL-series aluminum timing pulleys have a 1/4-inch width and feature a smooth bore with setscrews, a 0.080-inch pitch and range in size from 10 to 120 teeth.

APL Robotic and Vision guided handling systems are versatile units, that have the ability to singulate and manipulate a diverse range of components, including plumbing fittings, plastic mouldings and confectionery. The systems have been developed to automate components from bulk, inspect manipulate and place into the down stream equipment.

Designed to meet the rigorous timing requirements for industrial automation, the reference solution delivers EtherCAT cycle times of 100 microsecond cycles (10,000 frames per second) with a low jitter rate for precise device synchronization.

The Go-Scan systems are designed for industrial X-ray inspection and non-destructive testing applications in the Oil & Gas, Petrochemical, Shipbuilding, Aerospace, Defense and other related industries.

Predictive Asset Analytics Suite is designed to bridge skills and process gaps with smart technology, combining advanced predictive analytics with knowledge management and decision support to maximize asset availability.

The PCIe-GIE72/74’s utility and APIs provide real-time PoE status monitoring of device class, voltage, current, wattage and temperature. PoE power can be remotely switched on and off; PoE port priority and thermal thresholds remotely set; and possible failure predicted.

The fifth release of Matrox Design Assistant features a more image-centric approach to project configuration, whereby measurements are set up directly on the image itself, rather than through configuration panes.

The Graphite platform is ideal for factory automation and process control environments that may include manufacturing, oil & gas, water/wastewater, power, utility transportation and maritime.

The EC044A is a 44mm brushless motor available in a range of lengths, windings and gear ratios to accommodate a range of user application requirements. The EC042B is a smaller 42mm motor.

The industrial bar coding system combines factory-installed software with a networkable touch screen instrument and industrial thermal bar code printer.

To fulfill users’ different needs, the Axiomtek IMB500 is equipped with multiple I/O connectors including two RS-232/422/485 ports, four RS-232 ports, one PS/2 keyboard & mouse, four USB 3.0 ports, eight USB 2.0 ports, five SATA-600 with RAID 0/1/5/10, one mSATA, two Gigabit LAN ports, and eight channels digital I/O, HDMI, DisplayPort and VGA interfaces.

Designed specifically for harsh environments and available in five ruggedization levels for optimum performance, the PPC11A is ideal for applications such as command and control

The SEL-3360E and the SEL-3360S are industrial computers designed for extreme environments and small spaces. The SEL-3360E operates in environments ranging from –40° to +60°C (–40° to +140°F) with no fans or forced airflow.