Industry Products

Corrugated mounting plates are available in two sizes--“wide” (4.00”) and “narrow” (2.66”)--standards in the industries using corrugated bins.

The updated interface addresses international compatibility by adding language files for Chinese, German, Japanese and Spanish.

These programmable transducers convert and condition signals from most of the common resistance temperature detectors (RTDs), as well as thermocouple temperature sensors.

GS3-U3-91S6 camera has high resolution, global shutter CCD sensors with a USB 3.0 interface.

Updates in ControlMaestro 2013 include the BACnet Advanced operator WorkStation Certification, more than 160 standard communication drivers, and support for most standards and communication protocols including OPC, Modbus, SQL, ODBC, etc.

By Bill Lydon, Editor To meet their customer’s requirements, Sabisu has developed Shika, a lightweight historian, to process, manipulate and store data at higher speeds than can be achieved with SQL databases.

Turn-Cut function allows for processing work on horizontal machining centers without the need to use secondary machinery for a turning application.

The EHV/EHS is 30% more compact than previous models, yet it sounds off at up to 110dB at 1m.

The thyristor units start at 3A and range up to 2600A and 690Vac.

LS2018 and LS3518 motors are ideal for the design of compact linear axes as there is no need for the coupling and the bearing support point for the screw.

Series GFM2, GFM3 and GFM4 Gas Mass Flowmeters measure flow rates of a wide variety of gases.

HM960-HM86 is powered by the Intel HM86 Express chipset with up to 2 16GB of DDR3L 1333/1600MHz low voltage memory interfaces for faster communication between components.

HMI SCADA software has user interfaces that display and execute across all types of common Web browsers and are accessible from any mobile or smart phone application.

Lexium MDrive motors are now available with EtherNet/IP, ModbusTCP, and CANopen fielbuses.

PMK allows virtually any motor to be connected in parallel to any linear ball screw actuator, regardless of manufacturer.

Software allows for simulation, validation and optimization to be completed in the 3D virtual world and then transferred directly to the real world.

CANblue II universal bridge, gateway, and PC interface solution is for the wireless networking of CAN components and systems.

The controller has a Linux-based, real-time OS and Xilinx Zynq-7020 All Programmable system on a chip (SoC), which combines a dual-core ARM Cortex-A9 processor and Xilinx 7 Series FPGA fabric.

LabVIEW software is ideal for any measurement or control system, and the heart of the NI design platform. Integrating all the tools that engineers and scientists need to build a wide range of applications in dramatically less time, LabVIEW is a development environment for problem solving, accelerated productivity, and continual innovation.

Safe-T-Rack helps ensure compliance with evolving arc flash mitigation regulations and safe operation of circuit breakers, motor starters, loadbreak switches, vault switches, network switches and Load Tap Changers.

Products include Floodgate Defender, Floodgate Agent and Floodgate Aware software.

SEA 9751 and SEA 9754 modules enable users developing monitoring and measurement systems based on CompactRIO to access the entire application remotely.

The positioning range of the N-725 has been extended to 2 mm while maintaining very short settling times on the order of 20 milliseconds.

X20 and X67 modules now function reliably at temperatures from -25 to +60°C.

HR908-B is a Type 6 COM Express Compact form factor single board computer, based on the Intel Core QM67 Express chipset.

LEC-2260 allows sustained operation at temperatures between -20°C and 55°C.

The safety laser scanner offers a wide area detection zone at 190 degrees and is easily set to a maximum protection range of 2 meters and maximum warning range of 10 meters depending on the application.

EDS-405A/408A-EIP and EDS-405A/408A-PN are EtherNet/IP and PROFINET-enabled managed Ethernet switches.

TC8928 Analog Broadcaster/Bridge receives a single 2/4-wire 600 ohm analog signal and broadcasts it to up to 7 remote analog lines.

The G-Type sensor features direct analogue output in 3 signals: in voltage (0-10V or +/-10V) or current (4-20mA).