Industry Products

These sensors feature a 24 mm x 7.5 mm x 11.2 mm housing, industry standard mounting footprint, a flush and wear-resistant antistatic glass lens and a 45° cable outlet.

APC-3X19 has an Intel Socket G2 Core i3/i5/i7 processor, Intel QM67 chipset, multiple expansion slots and IP65 certified front panel.

Emerson updated Foundation fieldbus Version 3 diagnostic capabilities in its FieldQ rack & pinion fully integrated valve actuator and controls.

Telion now has embedded FIPS 140-2 encryption capability in their line of user programmable software defined data transceivers.

Available with a single core, dual core, or quad core processor, the low-power 800 MHz SBC35-C398 SBCs provide high-performance and an array of onboard I/O for embedded designs. Price: from $295.

Lugs are available with red, blue or yellow insulators from 3mm to 10mm stud size.

PACSystems RX3i, PAC8000 and VersaMax IP Scanner have Profinet interfaces.

Span Pac I uses readily available Trace Source Permeation Tubes to add a precisely known flow of span vapor into a controlled, adjustable flow of clean matrix gas to create a PPM calibration standard.

Service pack for CODESYS version 3.5 IEC 61131-3 programming system improves on user friendliness.

Using the current high-end DSP technology and a leading global camera positioning image recognition system, in cooperation with the vision camera positioning system and computer software, can this machine cutting machine for fabric tensile deformation of small automatic tracking compensation, to ensure that the cutting is accurate and correct. Roll on or woven label products fully automatic loading, blanking system, can greatly facilitate the user's use, greatly improve production efficiency.

RDmark marking software is the RuiDa technology company independent research and development is the laser marking to design specially marking control software, the collection formidable graphic editor and many kinds of signs engraves the function in a body, with this company’s RDM302XG-PCI, RDM302XG off-line, the RDM602XG entire off-line control card and the scanning inspires the mirror coordination use, can satisfy each kind of high accuracy, the high speed laser processing request.

The external software has the movement wisdom reaches the independent cutting carving software (i.e. the LaserWork software) all functions; The external software is the installment on software and so on AutoCad, CorelDraw, CaDian section external softwares, used AutoCad, CorelDraw, CaDian directly and so on the specialized graph processing software has paid the cartography edition function, had the more perfect graphic editor function compared to other independent laser software; Therefore supports the document format which AutoCad, CorelDraw, CaDian and so on the specialized software supports, including the vector form (for example PLT, AI, DXF) and the position chart form (BMP, JPG, GIF), compared to the independent laser software has the more document support form; Through software modules and so on the AutoCad, CorelDraw, CaDian own inducts the function to be able to support DST, DSB and so on embroiders the document format; Using AutoCad, CorelDraw, CaDian induct the function supporting documentation synthesis function, causes many document disposable output processing; Completely changed the drawing software and laser carving cutting software distinction independent operation troublesomeness, caused the drawing software and the laser carving cutting software has realized seamless docking, has truly realized “drew immediately, engraves immediately, cuts immediately” the integrated operation, the operation has been more convenient quickly;

RDM402XG-A(D) off-line laser marking controller based on USB2.0 and the ethernet connection, may carries on the communication through USB or the ethernet and the main engine to complete the data the memory and the management;

Inspires the mirror control card based on PCI main line RDM302XG-A(D)-PCI is the RuiDa technology to aim at the laser to inspire a section laser control card controller specially which the mirror the application develops; The hardware platform based on the high performance floating point processor DSP+FPGA construction, may complete the large-scale complex control operation, the realization inspires the mirror fine trajectory control; Large-scale logical gate array FPGA may complete the complex communication agreement and the nimble IO expansion; Uses the bidirectional DMA data manipulation, enhances the data the communication efficiency;

The RDLC430 system is the RuiDa technology development the new generation of laser carving/cutting control system, this control system has the higher hardware stability, the friendlier man-machine operating characteristic and the more formidable software function.Including more perfect four axis movement control function, large capacity file memory, two-circuit independent adjustable digital/simulation laser power source control connection, compatible stronger U plate driver, multi-channel general/special-purpose IO control and so on.

The RDLC420G laser carving/cutting card is the RuiDa technology specially to aim at a section controller which the laser carving/cutting application domain develops; The hardware platform based on the high performance 32 floating point processor DSP+FPGA construction, may complete large-scale and the complex movement control algorithm, achieved to many motive axle continual trajectory control, selects the position control, simultaneously completes the energy followed control, causes the laser energy in any speed even; Large-scale logical gate array FPGA may complete the complex communication agreement and the nimble IO expansion; The USB correspondence transmission is quick, the operation is simple;

The RDLC320-A laser carving/cutting card is the RuiDa technology specially to aim at a section controller which the laser carving/cutting application domain develops;The hardware platform based on the high performance 32 floating point processor DSP+FPGA construction, may complete large-scale and the complex movement control algorithm, achieved to many motive axle continual trajectory control, the spot position control, simultaneously completes the energy followed control, causes the laser energy in any speed even.Large-scale logical gate array FPGA may complete the complex communication agreement and the nimble IO expansion.The USB correspondence transmission is quick, the operation is simple.

RDCAD/CAM graph processing: the RuiDa technology the CAD/CAM graph processing system to have the formidable graph processing function, supports many kinds of data format, like PLT, AI, DST, DXF, NC and so on, meanwhile has many kinds of graphic editor function. Path pretreatment algorithm: The way optimization function has mainly solved each kind of processing craft request, divides into from inside to outside, from outside to in, waits for the processing from top to bottom the way, the user may according to need to carry on the choice. The curve is smooth: The very many cartography software draws up the graph, after the discretization production processing document, often the path meets accurately not too, in certain erroneous scope, the path section is often irregular, similar very many” noise”, such path when transforms to the XY axis movement, often can create the velocity of movement fluctuation to be big, not only the movement is suitable, causes the processing the path effect not to be good. In order to solve this problem, the RuiDa technology the system to use the advanced NURBS curve smooth algorithm, in the guarantee is originally in the path precision situation, effective elimination separate introduction path noise. Causes the curve to be smoother, the movement light is suitable.

The RDC6344G system is the RuiDa technology the technical development the newest generation of laser carving/cutting control system, this control system has the better hardware stability, has a better anti-high-pressured, the anti-electrostatic disturbance characteristic.Has the friendlier operation contact surface based on the LINUX man-machine operating system and a more formidable function.This controller including the more perfect more outstanding movement control function, the large capacity file memory, the two-circuit independent adjustable digital/simulation laser power source control connection, the compatible stronger U plate driver, the multi-channel general/special-purpose IO control, the integrated special-purpose time system support hardware encryption algorithm, may choose and so on with the PC machine communication support ethernet communication and the USB communication

RTPM includes Wonderware Intelligence, ArchestrA Workflow, ArchestrA System Platform, Dynamic Performance Measures and J5 Electronic Logbook software.

EtherCAT servo drives with DxM and DxI/O technology technology expands control to up to 4 axes of motion.

Its ISO 5 (class 100) clean room rating makes the MH3BM robot compatible with applications such as assembly, packaging and small parts handling.

zSeries wireless sensor system provides Web-based monitoring of temperature, humidity, and barometric pressure.

Enhancements in Version 4.0 include dimensioning tools for optimizing drives in winding-unwinding motion control applications.

ArcGard metal-enclosed switchgear is designed to protect personnel from dangerous arcing faults by controlling, collecting, and channeling the decomposition of the products from internal arcing faults to an area away from the perimeter of the gear.

Fisher L2e uses a force-balanced displacer sensor to detect the level of a single liquid or the interface of two liquids.

Series EFS2 is designed for pipe sizes from 1” to 12” and comes in three different materials (stainless steel, brass and PVC).

PC400C Panel PCs have an Intel 2.3GHz dual core processor, 4GB of memory and a 250GB hard drive.

Both networks enable the I/O and a wide range of control devices to connect on the same network, therefore reducing wiring and network complexity.

The multimode fiber optic port provides reliable, fast performance in process and factory automation environments requiring conversion from fiber to copper media.