Industry Products

IGS-3044GP supports 8 Gigabit ports with 4 ports of 10/100/1000Based-T(X) and 4 ports of 1000Based-SFP for multiple flow Gigabit environments.

The low-cost LC uses an AMP or Tyco brand connector for both motor and feedback connectors.

FRCIR connector combines Ethernet and MVB cable lines in a single interconnect package for shielding against interference and contaminants.

Scenario Virtual Engineer offers power generators a solution for building, testing and verifying control logic and process graphics without impacting ongoing plant operation

UNO-1170 has an Intel Celeron M or Pentium M CPU, 512MB/1GB DDR SDRAM, can operate in temperatures up to 60°C, and has a 512KB SRAM battery back-up system in the event of sudden shut down.

Based on the Piezo Walk principle, NEXACT combines high forces and long travel ranges with sub-nanometer resolution in a small package.

24S24.8TH has a 4:1 input range of 9 to 36 Volts DC in a 200 Watt industry standard half brick package. Price: $115.50

ProSense pressure transmitters now support five new input ranges for higher (200 psi, 3000 psi) and lower pressures (15 psi, 30 psi). These compact pressure and vacuum transmitters are designed to monitor system pressure in hydraulic and pneumatic applications. They are smaller and easier to install than mechanical models. Prices start at $125.

RHP line includes 3 phase contactor configurations rated at 120, 240, 280 or 600 VAC at 40 or 50 amp load ratings to replace Mercury Displacement Relays.

On Demand message feature sends SMS messages from a mobile device to the silent sentry to read any of the digital and analog/counter I/O values.

Sound and Vibration Measurement Suite Version 7.0 adds psychoacoustic measurements, making it possible to quickly set up tests to quantify noise, vibration and harshness.

Asepticplus gearmotor performs reliably in the high pressure, high temperature washdown conditions found in the food processing industry.

New models support RT (real-time) and NRT (non-real-time) data transfer according to the PROFIDrive profile with cycle times as short as 10 ms.

VRAL is available with a concentric shaft and a 5 arc-min backlash rating.

T-BOX now has SIA DC-09-2007 Internet Protocol Event Reporting to report events from premises equipment to a central station.

LPC-650 is a tiny package that measures 6.5" x 6" x 2" with Intel Core 2 Duo processors and up to 4GB of memory.

VMC-3000 is a DSP based plug-in card that can be configured in position mode, torque mode and a high-precision frequency locked velocity mode.

Latest versionn of monarch (Multi-platform Open Network ARCHitecture) is suitable for mid-tier utilities.

IEC 61850 OPC Solution covers both Logical Nodes and Goose Device Drivers.

The EZ Jump terminal blocks are available in screw clamp and spring clamp wire terminations in single level, multiple level, functional, fuse and numerous other styles.

Latest version offers centralized monitoring of bar code and third-party equipment, and camera image quality analysis.

EmbedRF Integrated includes hardware and software for integrating an RF design directly into on a board.

220 Series uses 32% less power than equivalent gear motor drives, drastically reducing energy costs and carbon footprints.

CS6910G incorporates the Super CCD Honeycomb color sensor, conforms to the AIA GigE Vision protocol, and is compatible with standard Gigabit Ethernet hardware.

The seal enables level measurement of condensed and liquefied gases at very low temperatures (to -196 C) for use in process tanks, side chambers, storage tanks and transportation vessels.

Upgrades include additional SIL 3 libraries for shut-down applications, and combined non-SIL, SIL 2 and SIL 3 applications for increased safety protection and process efficiency.

With the latest release, TopView can record all changes to alarm and notification settings, contacts, schedules, and notification groups.

ES2151 and ES2152 interface 16 DC current inputs, 16 voltage inputs, and either 16 current or voltage output signals to Ethernet devices or controllers

W900-IM radios transmit in the 902-928 Mhz band with no FCC license necessary to operate or install.

With a simple programming tool, users, system integrators and distributors are able to select between 1 and 65,536 pulses per revolution via a PC or Notebook.