Industry Products

BMS-436 4-port high speed Serial Device Server provides reliable communication connection between RS-232/422/485 serial devices and an Ethernet LAN/WAN.

SCM WM 9.0 focuses on efficiency inside the warehouse with support for RF, voice, wave planning, cross docking and labor reporting. Outside the warehouse, the solution creates value by extending capabilities including Yard Management, Event Management, Performance Management, Transportation and Logistics, and RFID.

The IAC-H672 low power SBC has a VIA Mark processor and both PC104 and PC104+ expansion capabilities. Other features include integrated graphics with 3D support, dual simultaneous display capability, SODIMM support up to 512MB of SDRAM, and 10/100 Ethernet.

ODVA DeviceNet cable is available in ODVA-compliant thick (600V-rated), which exceeds CL2 and CL3 per NEC 725.61; thin (300V-rated); and special PLTC thin, designed with 22AWG data pair and PLTC-rated (Power Limited Tray Cable), which exceeds CL2 and CL3 per NEC 725.61.

Touch-safe fuse terminal blocks accept Class CC and Class J fuses to meet National Electrical Code requirements for Branch Circuit Protection.

The Allen-Bradley EWEB module for the CompactLogix Programmable Automation Controller (PAC) provides network connectivity and Web capabilities for simplified remote data monitoring, data sharing and troubleshooting, bringing large-machine capabilities to control system applications with less than 2,000 I/O nodes.

Enhancements to Version 7 of SIMATIC PCS 7 Process Automation System include integration of Foundation Fieldbus, configuration / change management, redundant fieldbus with safety communication, smart alarm management, cyber security, plant asset management and condition monitoring.

MS46 slides are constructed of lightweight yet extremely durable aluminum. This makes them ideal as the carried axis in a multi-axis assembly because they minimize the total moving system mass to allow the application of smaller, less expensive motors. Slides are available in virtually any desired length.

The switch supports up to eight 1 GB ports in a compact 1U rack-mount switch. The switches can manage both high priority streaming traffic, such as security cameras, VoIP, and identity scanners, and the bursty data traffic typical of manufacturing operations.

The USB-503 logs up to 32,510 voltage measurements over a 0 to 30 VDC measurement range. The USB-504 logs up to 32,000 current loop measurements in the 4-20 mA range. The tiny USB-501-LT logs up to 4,080 temperature measurements in the 14 to +122 °F range.

CRDV/S drain valve combines an electronic sensor with a solid-state integrated logic analysis circuit to determine the exact amount of time necessary to empty condensate from a pneumatic system.

Ethernet Powerlink Safety Technology is independent of the transport protocol, and is completely compatible with other fieldbus solutions such as CANopen. All safety-oriented mechanisms, which are open and available, are implemented in the data transfer process so that safety-relevant data can be transferred over a standard fieldbus. With this solution, safety functionality is completely integrated in the control system and does not require special cabling.

Micro Motion F-Series Coriolis flowmeter is available with Hastelloy C-22 construction, making it suitable for use in corrosive applications where the process fluid is incompatible with stainless steel.

The GF90 Insertion and GF92 Inline Mass Flow Meters have received ATEX approval for use in potentially explosive environments classified as EExd IIC T4.

T-LSR series of computer controlled motorized linear stages offer travel up to 300mm, loads up to 20kg, speeds up to 20mm/s and 0.25 um resolution. Stages may be mounted in x-y or x-y-z configurations without any additional hardware.

PC/104 utility boards have 48 individually optically isolated digital inputs, making them suitable for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Price: $349.

CSB and CSW series DIN rail mounted power supplies operate using only 2 legs of a 3-phase circuit, thereby saving space, cabling and circuit protection costs. The CSB series has a universal input of 340-550 Vac, whereas the CSW series has a universal input of 185-550 Vac in both single and 2-phase.

FFM-202I is optimized for use with incoherent instruments such as FTIR or diode array spectrometers. It employs an extremely robust clean-in-place design allowing a high degree of up-time even in the event of upset conditions such as those often encountered in process gas or dryer solvent off-gas monitoring, where upset conditions may occasionally coat the interior of the cell with powders or other contaminants.

SNAP Motion Control Subsystem offers a cohesive development platform for applications that require motion control along with analog, digital, and serial control. The system combines a SNAP Motion host communication module in a SNAP I/O form factor, a SNAP Motion breakout board, and the OptoMotion command library.

Symbion-DX and Symbion-RX Version 1.2.software for application development, networking, and on-line monitoring of process analytical technology adds several new capabilities, including a significantly expanded library of mathematical functions.

Data Distribution Service allows distributed applications to simultaneously support both IPv6 and the current-generation IPv4, easing migration to the newer standard. IPv6 support is required of all U.S. Department of Defense networks and applications starting in 2008, making it essential for engineers to begin adoption of this wide-ranging standard.

Ethernet Switch Selector helps determine the most advantageous switch to employ in your applications instantly and accurately. This easy-to-read selector answers questions for successful deployment including temperature range, port count, multimode or single-mode fiber, connectors, dimensions (in inches), and mounting.

Siemens has released the next generation of its mid-level touch and operator panels. The new 277 panel series replaces the highly successful 270 series with the latest LCD technology and advanced features that were previously limited to high-end models.

CGDP Series contactors are rated for up to 50 Amps for resistive loads and are available in one pole, one pole plus shunt, two pole and three pole configurations. Contactors are UL and CSA recognized, meet ARI 780 ratings and are RoHS compliant.

In Remke’s family of Tuff-Seal™ wire management products, customization means customers can mix and match from our extensive selection of special materials, wire mesh, components, threading, custom packaging and private labeling to develop the wire management product that meets specific application or environmental needs.

In Remke’s family of Tuff-Link™ industrial interconnects & cordsets customers can mix and match from our extensive selection of special materials, special hardware, special wiring, custom packaging and private labeling to develop the product that meets specific applications or environmental needs.

Remke’s family of Tuff-Link industrial interconnects & cordsets are used with sensors and control devices for easier initial installations & quick component replacement in all type of industrial applications. Custom products, specials & variations also available – even for small quantities.

Tuff-Seal™ Dome Cap Connectors from Remke Industries provide the utmost ease of use, durability and corrosion-resistance at surprisingly competitive prices. These liquid-tight, strain-relief connectors are offered in a wide variety of sizes and are UL & CSA approved.

HMG-628G Gigabit Ethernet Switch is compatible with 10/100/1000T devices, providing the flexibility to mix and match fiber interfaces. Web browser, SNMP, Telnet, CLI and menu driven management can remotely configure the switch.

SBL series can be mounted between conveyor rollers while providing package detection regardless of color. Sensors can be directly mounted with thru-hole mounting or can be attached with an optional mounting bracket.