Industry Products

Zlinx wireless remote I/O maps directly into a Modbus table, making it an easy fit to any PLC, HMI or PC based control system running LabVIEW or other popular automation software. Wireless modules provide Modbus compatible communication at ranges up to 20 miles.

A smart AC motor drive allowed Centrilift Cable to eliminate a PLC and improve the productivity of winding finished cable onto drums at its facility in Claremore, Oklahoma. Centrilift Cable makes specialized cabling for the electrical submersible pumping systems used in oil and gas wells.

KPXI products are for high speed automated production testing as part of a hybrid test system using precision instruments. Test engineers and designers can combine high-speed data acquisition and tight trigger synchronization of the KPXI products with the precision measurement capabilities in Keithley instruments for a hybrid test system architecture.

JetCon 2401 RS232/422/485 to fiber converter transmits serial protocol over fiber media up to 40km (JetCon 2401-s single-mode) or up to 5km (JetCon 2401-m multi-mode) and provides a higher level of signal quality and security than copper cabling. A fiber optic network link is immune to EMI, RFI, cross-talk, ground loops and other electrical problems, greatly enhancing the signal quality in severe environments.

The ET-10MG offers 8 10/100 Mbps RJ45 ports plus 2 Gigabit combination ports for copper or fiber connections. All of the RJ45 copper ports support auto-negotiating (10/100 or 10/100/1000), auto-crossover and auto-polarity for plug & play connections. The fiber ports 9 & 10 also accept SFP fiber optic transceivers for noise immune links up to 80 km.

InternalWeb DV server software resides within an AXT100 fixed-mount thermal imaging camera and interacts with it, similar to a router's internal web page. Using the server, the AXT100 can connect to a network with Fast Ethernet and stream live video or thermal data to multiple destinations.

D-EPIC control transmitter provides a cost-effective alternative to positioners for Safety Instrumented System (SIS) applications. Exida confirmed the D-EPIC is suitable for Safety Integrity Level 3 (SIL3) service by performing a FMEDA with calculated PFD and SFF values.

Multifunction data acquisition (DAQ) modules and instrument chassis offer increased bandwidth for multiple I/O operations, ease of connectivity, hot-swappable connections, and a sampling rate of up to 3 MSa/sec for a single channel. Users can set up and configure tests swiftly with its plug-and-play USB interface.

ASIMBKKB series offers two circuits in one terminal block that can be mounted on either a 15mm or 35mm DIN rail. It has a current rating up to 20 amps at 300 volts and a wiring capacity of 30-10 AWG. Space is saved in a cabinet along the DIN rail due to the two wiring levels which allows the block to have a double packing density.

Automation Panel 800 offers a high degree of flexibility. Individual expansions for function keys, electromechanical keys, and the E-stop function mean that it can be optimally adapted to the needs of the application. Mounting on swing arm systems allows the operator panel to be placed at the most ergonomically convenient position.

AccuProx analog inductive proximity sensors can sense objects at distances up to 25mm. The sensors are ideal for applications that require precise position sensing and measurement or detection of small variances, such as error-proofing, saw blade deflection, material blemish detection, absolute angle detection and part positioning.

Rosemount MultiVariable 8800 Vortex Flowmeter has isolated, independent vortex and temperature sensors, allowing both sensors to be verified or replaced independently without breaking the process seals. This eliminates process shutdown for verification of the temperature sensor. The flowmeter lowers total installed cost of temperature compensated measurement points by 25% in saturated steam applications.

Capable of speeds up to 30 cases per minute and priced from $52,000, the GS100 series is ideal for a wide array of applications, including food, beverage, consumer goods, and general manufacturing. The GS100 series provides a cost-effective, fully automated palletizer for larger, multi-line operations where high-speed palletizing is not cost-justified, or for converting applications from manual palletizing.

GS110 Process Imaging System for Low Emissivity (Low-E) glass monitors one-side coated flat glass. With the addition of an IR point sensor to measure the temperature on the uncoated side of the glass where the emissivity is both known and significantly higher, the GS110 can automatically correct the thermal image and provide a more accurate result.

CAT1 is an intelligent loop powered 4-20 mA transmitter with linearization; CAT2 is a signal conditioner offering a variety of output options and High and Low flow rate alarms; and CAT3 is an intelligent signal conditioner with linearization and provides a pulse output scaled per unit of flow and optional High and Low flow rate alarms.

The Allen Bradley SmartGuard 600 safety controller, measuring a compact 4 x 3.5 x by 5 in. is for applications that have traditionally fallen between safety relays and safety PLCs. This safety controller helps reduce the wiring and installation costs commonly associated with relay-based systems, and tightly interlocks with programmable controllers.

The Equipment Operations Module leverages the ISA-95 information standard. It helps manufacturers increase operational performance and manufacturing responsiveness by capturing critical equipment performance events and efficiency information. This real-time information is provided to operators and decision-makers, enabling them to take immediate action to improve operational performance.

Built on the industry standards-based ArchestrA software architecture, the Wonderware System Platform allows customers to have one common strategic platform for all of their networked supervisory HMI, SCADA, production management (MES) and performance management (manufacturing intelligence) solutions.

FactoryPMI "Retargeting" allows users to seamlessly launch projects from any server on the network in any client. This paves the way for a global SCADA system. Authentication sessions are maintained during a retarget, allowing users to jump to any screen on any application that they have permission to access without needing to log in again.

DCS800 power converters have supply voltages of 230-1200 Vac, outputs from 20 to 20,000 Adc, and CE, cULus and C-Tick approvals. Expansion modules are available for all commonly used fieldbuses, and for additional analog and digital inputs/outputs.

Marathon Blue Chip XRI motors improve system reliability while maintaining optimum motor system efficiency and substantial energy savings. Available in 15-100 hp sizes, Blue Chip XRI motors meet NEMA Premium efficiency levels and are an excellent choice for use with compressors, blowers, conveyors, pumps, and in dirty or dusty environments. Prices start at $765.00.

The NYCe4000 multiple-axis controller integrates the complete control and drive hardware in one unit with a smaller footprint than an industrial PC. Thanks to its open software architecture, the high-end motion controller is extremely flexible for automating modules and complete machines with optimal code protection for the OEM.

TVI40N Series Incremental Rotary Encoders have an outer diameter of 40mm, are IP54-protected, provide pulse outputs up to 1024 ppr, and are ideal for space-restricted applications. They offer a tangential cable outlet that ensures a buckle-free connection.

UC Series features a unibody construction for tool-free dismantling and easy cleaning. The conveyors are extremely hygienic, making them ideal for a variety of pharmaceutical processing applications, including loading and unloading coating pans, manufacturing tablet cores, and handling or transferring pharmaceutical powders.

801-HV is a positive-displacement, two-component meter-mix dispensing system designed to apply small precision beads and small metered shots of precisely mixed resins. The fixed-ratio design improves production rates and product quality, and reduces manufacturing costs in micro-dispensing applications.

Major system enhancements to Industrial IT Extended Automation System 800xA include features that help customers add applications to running processes without requiring costly system downtime, and integrate multiple 800xA systems into one control room. Users can add programs, modify configurations, and implement software upgrades while production is running, and then simulate the impact these changes will have on running production before they are executed.

Model OS24-PS Solar Power Supply provides power to electrical, electronic and electro-mechanical devices in areas where conventional power is inaccessible or too costly to provide. Each system is sized to meet the power demands of the connected equipment and geographical location of the install site.

UNO-2053E platform offers dual LAN, dual USB, PC card interface, and two RS-232 communication ports. It can be provided with Windows CE which is pre-configured and optimized for on-board device drivers. To expand storage capability, the UNO-2053E allows for an internal 2.5” HDD that can be used for large data back-up requirements and OS installations such as Microsoft Windows and Linux.

DUPLICON Power Distribution System is a stackable plug connector system that meets protection category IP67 standards. Designed for energy distribution in large-scale machinery and systems, DUPLICON offers uninterrupted communication from the mounting rail in the control cabinet across the decentralized power distributor to the device connections in the field.

Q12 Uprox + sensors are able to achieve a full 5 mm sensing range when flush mounted. The sensors incorporate coils on a PCB with staggered oscillator frequencies to avoid mutual interference. This allows Q12 sensors to be mounted directly next to each other, fully flush, and embedded in metal. The miniature sensors detect all metals at the same rated sensing distance.