Industry Products

The Industrial Ethernet Module enables fast, low-cost connection of devices to ETHERNET Powerlink, EtherNet/IP and PROFINET. The module is based on an Altera-FPGA and contains the CPU (NIOS II), an Ethernet Controller and an integrated 2-port hub, which is routed out via an RJ45 connector. Depending on the version, the protocol software for implementation of an ETHERNET Powerlink controlled node, a PROFINET device or an EtherNet/IP adapters is already on the module.

KSGL and KPG protocol converters and Gateways provide cost effective solution to achieve sub-station modernization requirements and utility communication security requirements in a standards based manner. The products support standards like IEC 61850, DNP3, IEC 104, ICCP, IEC 60870-5-103, DNP3, Modbus, SPA, Courier, DLMS/IEC 62056, Ethernet IP, DH+, ControlNet, SRTP, GSM and various other proprietary and standard protocols.

Software includes Availability Based Tariff, Merit Order Dispatch/Economic Dispatch and CIM-XML Based Integration and modeling solutions for the Power Industry. Applications include energy trading, enterprise integration, and dynamic modeling in the deregulated energy market.

With more than 6 different IEC 61850 Implementations on different embedded and SCADA platforms, SCL / ICD Configuration Utility enables you to create/edit/modify ICD files easily and as per the standard.

QD12 has a small OD (1.2 inches), overall height of just over an inch, and the stability of a bearing encoder. Outputs consist of a quadrature with index pulse, and three-phase commutation.

Masterpact NW molded case DC circuit breakers offer a small footprint and are factory-tested and calibrated, greatly reducing installation time and cost. These breakers are ideal for use on critical power DC applications such as battery UPS systems, transit applications and DC back-up systems in power plants and substations.

Continuity checks, voltage testing and power distribution are quick and easy with Weidmuller's WTR 2.5 disconnect terminal. This disconnect terminal now accepts pluggable jumpers, which will save significant time in installation and maintenance. Rather than screwing jumpers to each terminal block, you can quickly plug multiple poles in place with a simple press to the back of the insulation sleeve.

WeiCoS ZT4/2AN/1 and ZTPE4/2AN/1 now include 4mm sq. models that will handle up to 10AWG conductors. The device combines both terminal block and plug-in connection technology that results in an efficient, modular, functionally flexible, and manufacturer-independent wiring system.

Instruments are available for monitoring and controlling temperature, pressure and flow conditions at oil and natural gas well sites. Typical applications include Coal Bed Methane (CBM) and natural gas well heads; oil and gas processing, storage and transport; and tank and pipeline cathodic protection.

Designed for a variety of applications in the soft drink, beer, wine, food, and household product industries, Zero-Gap is a more precise, efficient and low-maintenance alternative to conventional laning systems. Zero-Gap increases efficiency to 98% or greater and operates at speeds from 100 to 1600 bottles per minute.

CNC products include the basic Series 0i Mate Model C; 16i/18i/21i Model B nano CNC with Automatic Tool Nose Radius Compensation; and Series 30i/31i/32i Model A nano CNC for advanced and complex machines.

Proficy Assembly for Discrete Industries includes targeted solutions that address manufacturing intelligence, execution and awareness through a combination of GE Fanuc software with control solutions. Baseline capabililities of the solution include in-line sequencing, BOM distribution, error proofing, quality assurance, production reporting, product birth certificates and Overall Equipment Efficiency (OEE).

Proficy Machine Tool Efficiency (MTE) 4.0 is an Overall Equipment Effectiveness (OEE) monitoring and analysis solution that digitizes the information being generated throughout factories into a “virtual plant.” It also provides a suite of remote diagnostic tools to maximize mean-time between failures (MTBF) and minimize mean-time to repair (MTTR), and can be used to populate fields in Computer Maintenance Management Systems (CMMS).

The Intellibeam EX25 scan engine reads and decodes 1D and 2D bar codes in any orientation from six inches to 50 feet, as well as composite and postal codes. The EX25 also can photograph proof-of-delivery documents and evidence of damaged, expired or unsealed goods.

The pistol grip LANpoint MOBILE supports 1D and Extended range 1D and 2D laser scanners. Optional omni-directional imaging is capable of reading 1D linear and 2D barcodes, OCR fonts and postal codes, along with the ability to capture images. This vertical quarter-screen portable terminal has embedded Windows CE v4.2 or v5.0 operating system, giving customers built-in access to Microsoft's .NET Compact framework.

The CV30 is built rugged to excel in dirty and dusty environments, freezing conditions and water wash-down procedures. The touch-sensitive display is heated, making it ideal for cold warehouse operations. The CV30 offers a choice of Microsoft Windows CE.NET 5.0 or Windows Mobile 5.0 operating systems, multiple mounting options, and comes with Cisco Compatible WiFi, Bluetooth and RFID support.

JetCon1301 Industrial Ethernet Fiber Media Converter can be operated in two different modes: switching converter mode and pure converter mode. Store-and-forward technology is implemented in switching converter mode to filter out abnormal packets. In the pure converter mode, it only converts the signal between copper and fiber port without any packet check.

The NI 9852 module for the CompactRIO platform provides direct connectivity to low-speed/fault-tolerant CAN networks. Commonly used for body electronics in the automotive industry, low-speed/fault-tolerant CAN networks communicate through two wires. CAN networks have short cable distances and slower communication speeds, making it possible to transmit data asymmetrically over just one bus line instead of two.

NI-DNET 1.5, the latest driver software for plug-in NI DeviceNet interfaces provides high-level, easy-to-use functions for rapid application development. It has two significant new utilities, the DeviceNet Configurator--which can search a DeviceNet network to determine information about connected devices--and the DeviceNet Analyzer, which monitors network activity and interprets controller area network (CAN) messages.

In addition to highlighting sensing technology for the elevator industry, this fully-illustrated guide highlights sensing solutions for industrial & pedestrian doors and gate control. Featured technologies include: absolute position feedback systems, zone scanners, light grids, photoelectric & inductive sensors, and rotary encoders.

G3 Series HMI has a built-in image driver that allows the integration of multiple Banner Presence PLUS vision sensors. ; the G3 supports Banner’s full line of sensors. A machine designer can configure a G3 for specific sensor operations such as switching inspection files for different product batches, archiving and running additional inspections, uploading barcode data and displaying images of failed products.

The TUV-certified Allen-Bradley Kinetix 6000 Safety servo drive with GuardMotion incorporates a safe-off functionality that allows users to restart machines faster and reduce downtime in the event of unplanned maintenance. Machine builders can now safely and efficiently power down motion control systems in a wide range of high-speed applications, including packaging, material handling, and converting.

The SinCos SRM64 Series multi-turn servo motor feedback systems offers reliable operation in temperatures ranging from -20 up to 110ºC with high resistance to shock (100/10 g/ms) and vibration (20/10 – 2000 g/Hz). They provide precise absolute positioning with 32,768 steps per revolution over 4,096 revolutions. Hollow shaft bores are available for up to 14mm shafts.

This new advanced device connectivity server uses GE's Service Request Transfer Protocol (SRTP) to provide real-time, configurable read-and-write access from Wonderware software to GE PLCs. The SRTP within the new Wonderware DA Server is layered on top of TCP/IP in order to communicate with GE's Series 90, Versamax and Pacsystems PLCs.

The DM2200 Module for wireless sensor networking combines low power consumption components and RFM's Third Generation Virtual Wire radio to provide longer range than was previously possible with a battery powered mesh networking node. The DM2200 is a powerful and versatile embedded module that provides superior performance across a broad range of industrial automation applications.

Three new affordable, rugged and user friendly hand held thermometers are for measuring temperature with thermocouples, RTDs and both T/C and RTDs in harsh on-site, process environments. The respective pocket thermometer models can measure with a high accuracy of 0.02% of reading and a very low temperature coefficient of 15 ppm/°C.

AR-B1693 Mini-ITX form factor Fanless Motherboard based on Intel Celeron Ultra Low Voltage 400MHz and 650MHz processor provides performance with low power consumption. AR-B1693 has high-bandwidth interfaces such as VIA enhanced audio, 10/100 Ethernet, USB2.0 connectivity, Serial ATA, UDMA IDE port and PCI slot.

ValveAnalysis software plug-in works with Emerson Process Management's AMS Suite to run diagnostic signatures for Flowserve valves, actuators and positioners. It enables AMS users to run diagnostic signatures, providing key information that can be used to maximize equipment performance.

CalVal electronic technology for self-calibration and automatic validation of leak testing can now achieve an accuracy of ±2% of reading or 0.02 sccm (standard cubic centimeters per minute). This allows manufacturers to maintain the highest quality standards without slowing production line output for time-consuming mechanical calibration.

PBA430 platform for weighing in washdown environments incorporates a hermetically sealed load cell and stainless steel construction for protection against cleaning agents and corrosive agents frequently found in food preparation and industrial environments. The platform has been designed specifically for use in food processing, chemical, and any other industry where resistance to high humidity, high pressure washdown, and corrosive agents is essential.