Industry Products

The M18T analog output model senses whether the object is warmer or colder than its surrounding—even when the difference is only 3° C and even if the object is stationary. The self-contained sensor requires no controller to operate, and its TEACH function allows the user to program two distinct temperature switchpoints for an output that automatically scales over a positive or negative slope.

C80 Series Airbleed Priming Valves automatically open to allow F/G-20 through D/G-12 Series Hydra-Cell pumps to self-prime by quickly relieving the system of trapped vapors or air rather than compressing the gas and causing pump airlock. The valves then automatically close to provide immediate full system pressure.

HOLOCON, an IEC 61499 - compliant highly distributed controller, brings true, masterless-control right down to the machine level following international standards for interoperability.

MDS NETio, an integrated, scalable, family of I/O and wireless communications products, enables the extension and regeneration of I/O signals while reducing complexity, wiring, and termination costs. Integration complexity is significantly reduced, because the NETio consolidates I/O with an MDS radio.

The PD41 bar code printer is housed in a rugged metal case. It offers high-speed, multi-channel Ethernet as a standard configuration, in addition to serial, parallel and USB connectivity. It also offers many Smart Printing features normally found only in high-performance printers.

Alarm MOCCA version 2.1 eliminates the need for onerous change management procedures by automatically tracking changes made to the Distributed Control System (DCS). Alarm MOCCA simplifies DCS integrity assessment by empowering users to not only validate every parameter, but also validate whether configuration guidelines are being followed.

ACB-MP+4.PCI, a four-port PCI bus RS-232 synchronous serial interface, is an ideal solution for military, satellite, radar, banking, and other applications that require robust synchronous communications. For maximum flexibility, each of the serial ports can be individually configured for RS-232, RS-422, or RS-485 communications.

Endurance Technology innovations for BC Series of pneumatic band cylinders assures that every Band Cylinder is designed for long life in the most demanding applications. Four complete lines of rodless band cylinders, including the BC4, BC2, BC3 and BC3D, deliver peak performance for a range of industrial load requirements.

AutoManager products and related industry-focused business applications will enable immediate deployment of both existing and new AutoCAD data and other technical documentation throughout the enterprise to streamline operations, reduce errors and aid decision-making.

With the conveyor running only when needed, it becomes even more cost effective with the HTBL ZPA DriveControl on a per zone basis versus both existing mechanical methods and other competitive motorized driven roller solutions. The HTBL ZPA DriveControl module is easy to install with no external control of programmable logic control (PLC) required. However, it does allow the use of an external controller or PLC to enable integration into any existing control scheme. It interfaces with both PNP and NPN style photo eyes.

ADAM-4150 and 4168 modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. The ADAM-4150 includes seven input channels and eight output channels with over current/short circuit protection. The ADAM-4168 has eight form A output channels.

The UVX-300G-REM has a remote sensing head that is easily mounted and measures just 0.7x0.8x1.2 inches, a volume of less than 0.7 cubic inches – 87% smaller than previously available UV sensors of this type. The 87% size reduction, achieved via remote sensing, allows the sensor head to be positioned near rollers and spray nozzles where others will not fit, while its long detection range allows positioning away from debris contamination and physical damage.

The Utilibox Style A plastic enclosure measures 6.10-in. long x 4.60-in. wide x 1.37-in. high. Internal dimensions are 5.84-in. x 4.34-in. x 1.17-in. It is ideal for housing switches, controls and alarm systems. The enclosure comes in flanged and unflanged styles, weighing 6.3 oz and 5.9 oz, respectively.

The Inside-Outlet GFCI combines an external and an internal control panel GFCI receptacle into one assembly. This increases safety and saves time by making the GFCI TEST/RESET functions available to maintenance personnel from the outside of the control panel. By installing an external Inside-Outlet™, a separate internal utility receptacle no longer needs to wired inside the panel.

PXI chassis and controllers based on PCI Express signaling, delivering up to 1 GB/s per-slot dedicated bandwidth. Engineers can use the PXI Express chassis and controllers to improve performance for PXI systems and integrate high-bandwidth PXI Express modules as they become available.

Magellan family of motion control ICs have automatic machine monitoring capability for recording and reacting to performance and safety-related conditions. These programmable motion chips offer users the ability to define and initiate motion-related actions such as smooth stop, abrupt stop, or system disable upon occurrence of user-defined conditions.

AlphaWave radio modems are designed for SCADA systems where robustness and reliability are paramount. The AW400 and AW435TM have been approved and licensed by the relevant statutory bodies FCC and CE. These two Transceiver units are complimented by a low power Receive only OEM version, the AW400Rx and a 1Watt Transceiver OEM version, the AW400Tx.

The Data Station Plus is a multiple protocol converter, a system data logger, and a web interface for industrial and M2M applications. The Data Station Plus converts numerous protocols simultaneously, allowing seamless communication between disparate devices, and can save collected data in CSV files that are easily viewed by programs such as Microsoft Excel and Access.

DSS.4 double level knife disconnect terminal block for mounting onto a DIN rail has a feed-through connection on the bottom level and a knife disconnect on the upper level, making it suitable for control loops. Typically in a control loop or similar circuit it is necessary to open up one side of the circuit to conduct tests; the DSS.4 facilitates this necessity.

WTL 4/2 STB Disconnect Test terminal block makes it possible to open the busbar in the terminal and for the adapter to make contact with a single action. This make-before-break design assures continuous operation of the circuit during the test procedure. With the WTL 4/2 STB, the order in which disconnect and contact is made is simply determined by the length of the color-coded plastic lug on the test adapters.

Version 1.2 of Datastick Spectrum software for PDA and desktop PCs provide enhanced display of high frequencies and faster operation during vibration collection and analysis. With Datastick Reporting System for VSA version 1.2, users can now magnify the display of any time span or frequency span and can automatically detect spectrum peaks within any selected span.

two new higher-powered additions to the Compax3 family of industrial high-performance, all-digital servo drives increase current output to 10A and 15A RMS. A total of eight distinct power levels are now available ranging from 300W up to 20kW of continuous motor shaft power.

The Promi-ESD is an embedded Bluetooth serial module for users who need to embed Bluetooth connectivity directly onto the circuit boards of RS232 based equipment like security systems, POS, industrial machinery, and medical devices. It can be connected to the device via built-in UART interface and communicate with other Bluetooth enabled devices such as mobile phones, handheld computers and laptops.

Specifically designed for material handling applications, Interroll belt drives are completely enclosed and sealed inside a steel shell, preventing environmental conditions such as water, dust, grit, chemicals, grease and oil from affecting the performance of the belt drive. Also, because the drive unit and bearings are mounted within the protective shell, the belt drive takes up less room than a conventional drive with significant noise reduction.

AR-B1831 EPIC Single Board Computer Supports Intel Pentium-M and Intel Celeron-M Processors. It is equipped with Intel 855GME with ICH4 companion chip, giving you the excellent embedded solution requiring extremely high-performance x86-based processing.

The ID PAL Labeling Tool is a handheld label printer designed for industrial labeling applications including: wire and cable marking, patch panels, control panel and component marking, workstation labels, maintenance and engineering, electrical data communications, field service and installation, storerooms and tool cribs, construction, laboratories, and asset and general identification.

HMS will complement its family of interchangeable Anybus communications modules with embedded interfaces for PROFINET with IRT. The PROFINET Real Time communication interface from HMS just passed certification and is among the first certified PROFINET devices worldwide. PROFINET with IRT will be the latest contribution to the Anybus® family.

The C3700 Series is available in 9 standard DC input voltage ranges from 10-800VDC as well as AC input voltage ranges of 185-264 and 93-138 / 185-264 (switchable) VAC. 3 Phase AC input voltages of 3 x 208VAC (160-230), 3 x 400VAC (320-460) and 3 x 480VAC (400-530) are also available. The units are packaged in a 6U x 28TE x 226mm Eurorack module for space savings and incorporate DIN 41612 H15 I/O connectors.

RockStar rectangular connectors have a die-cast aluminum housing with a stainless-steel locking system as standard, a high-quality multi-layered surface sealing, and laser-etched identification marking. With these standard features, the housings are suitable for corrosive environments and are ideal for industrial applications.

CleanMark on-demand label printing solutions are certified for cleanroom usage. They feature quick and easy printing of barcodes, text, numbers, and graphic images; printing up to 6 inches per second; wide variety of media sizes and types; wide range of supported barcode types, including linear and 2D; thermal transfer and direct thermal printing; and easy-to-use barcode software