Industry Products

EGE also specifically adapts the sensors to dielectric constants and to the temperature ranges of the liquid to be measured to ensure precise results in challenging media and cramped installation conditions.

The RTC-1010M offers a choice of Windows 10 IoT or Android 9 (available Q2). It also features USB 2.0, USB 3.0, USB Type C, Micro HDMI as well as support for Micro SD and SIM cards.

The integrated stepper motor controller and motor driver allows for control, and the worm gear allows for continuous rotation. Zaber devices allow daisy-chaining in a vacuum chamber.

The tools add trend analytics to manufacturing metrics of compliance, utilization, maximum, minimum and average measured values monitored by the wireless sensor system

ABB Ability System 800xA 6.1 introduces Ethernet I/O solutions, additional High Integrity controllers and a series of engineering tools such as a Ethernet I/O Field Kit, an Ethernet I/O Wizard for field commissioning and the possibility to engineer with signals in the Control Builder.

These multi-channel gradient valves are useful for solvent selection, stream splitting, flushing and other automated applications.

IP65 Motors are available in single-shaft configurations and have a 1-ft. cable and locking connector. Extension cables with mating IP65 connector are available in 6, 10 and 20 ft lengths.

The X-LSM-SV is designed with vacuum compatible materials to minimize outgassing and allow for faster pump down times. Zaber devices allow daisy-chaining in a vacuum chamber, decreasing cables and clutter.

SKF Pulse has a visual interface that guides users through the data collection process. Users enter asset information that automatically configures alarm thresholds based on ISO standards.

The Penetration Testing Assessment discovers vulnerabilities to assess the security of an organization’s IT environment. The Industrial Cybersecurity Assessment provides evaluation of vulnerabilities in industrial control system (ICS) environments, taking into account the operational technology (OT) requirements of utility, manufacturing, oil and gas, and critical infrastructure operators.

When mounted on a compatible single board computer or other XMC carrier, the Model 71810 provides a customizable I/O signal status and control interface.

Schneider Electric is pleased to announce the launch of the multi-tiered pressure transmitters line, to allow customers to optimize their investments without compromise of quality and capitalize on investments.

ABB Ability Wellhead Manager is cloud-based, so operators can gain insights about their production assets anywhere in the world. Remote workers can connect in real-time.

The gantry is driven by linear motors and each axis is equipped with preloaded linear bearings. Applications include 3D printers, assembly, pick-and-place, alignment, inspection, and other industrial automation applications.

The power inverters are available for input DC voltages 12V/24V/48V, and output AC voltages 110 V /120 V /220 V /230 V /240V for selection.

The DC VSDs are built on ABB’s all-compatible, common drive platform, sharing the same control panel, features and tools as recent- and future-generation ABB drives. Once users have learned one ABB all-compatible drive, they can use other all-compatible drives – both DC and AC.

FCl’s AST thermal mass flow technology for the ST80 Flow Meters features a hybrid sensor drive. This measuring technique combines both constant power (CP) and constant temperature (CT) thermal dispersion sensing technologies in the same instrument.

The combination of single-cable connectivity and POSITAL’s kit encoders provides motor manufacturers, machine builders and system integrators a way of building absolute position feedback into devices such as servo-motors, stepper motors and robotic joints.

PC-DMIS 2019 R1 introduces the GD&T Selection and Capture tool which automatically transfers GD&T data from 2D ‘blueprints’ into the PC-DMIS measurement routine.

When the panel-mount connector is mounted it can withstand wash-downs and splashes when a cable is not connected, making the NCC connector suitable for medical and industrial applications where spillages and cleanings are a regular part of the environment.

The result is a microenvironment that adapts to each individual’s needs and is achieved through the measurement and grading of factors such as air quality, temperature, lighting environment and humidity.

These basic controllers are IP66 rated for dust and water jet ingress protection (inside suitable enclosure) and have a 0°C to 50°C operating temperature range.

RIGOL’s EMI Measurement Application provides an EMI Pre-Compliance Solution allowing engineers to measure, compare, analyze, and report on EMI issues throughout their design process.

Through the use of wireless “data eyeglasses” and Pick-by-Voice, a Hänel Lean-Lift Vertical Lift Module (VLM) can be operated hands-free, without the use of a system controller or keyboard.

TrendMiner enables process and asset experts to analyze, monitor and predict operational performance through trend analysis of time-series data. The new 'Stacked Trend View' enables the display of trend data within separate lanes, vertically stacked and aligned.

TF1 Series consists of an inductively coupled position marker attached to a moving rod/piece of the user’s application that requires a position measurement and the sensor with operational and programming status LEDs.

These 15 / 20 / 30 watt 5V out models with “-A1” suffix feature an extended trim range up to 6VDC. This makes these converters suitable for providing isolation and regulation for circuits in low-noise applications.

The FWM7BLZ20B series is powered by Nordic Semiconductor's nRF52832 SoC. The symbol rate and data rate accommodates both 1Mbps and improved 2Mbps to facilitate communication speed with other Bluetooth devices.

IBM Maximo Asset Performance Management (APM) solutions collect data from physical assets in near real-time and provide insights on current operating conditions, predict potential issues, identify problems and offer repair recommendations.

The AS7026 provides continuous heart rate, heart rate variability, blood pressure, and electrocardiography (ECG) measurements when embedded in a consumer device such as a fitness-monitoring wristband or smart watch.

The USB7002 combines USB 3.1 technology with the USB Type-C. The USB7002 enables direct USB Type-C connections through native Configuration Channel (CC) pin interfaces and integrated 2:1 multiplexers that support the reversible connection feature of the USB Type-C connector.

ELOfleet is OEM-independent and can be installed on any type of industrial truck. But it also provides an alternative for managing single-brand fleets. Customers can customize their own branded versions of ELOfleet, with their own individualized safety messages.

AIStorm processes sensor data directly in its native analog form—in real time—by using charge-domain processing instead of GPU/digital processing.

This modular embedded system is certified with CE, FCC, EN 50155, EN 50121-3-2, and EN 45545-2, and is in compliance with E-Mark, ISO 7637-2, IEC 60945 and DNV 2.4 to ensure the operation.

These gauges feature an industrial grade black die-cast aluminum case with two high pressure and two low pressure connection ports (1/8" female NPT), and a 4-inch (100 mm) white aluminum dial with black pressure markings.

The 9404 features four 5 GHz 12-bit channels, each supported by real-time sampling to 500 MS/s per channel and up to 1 TS/s (1 ps) equivalent-time sampling.

The plug-in module PCAN-MicroMod FD, the development board PCAN-MicroMod FD Evaluation Board, and the PCAN-MicroMod FD motherboards Analog 1, Digital 1, and Digital 2 will be available

Based on IEEE 802.15.4, the SAM R30 module supports proprietary networks that can be customized and configured. This is suitable for applications where interoperability is not desired due to their inherent vulnerability to remote attacks, such as alarm systems, building automation, smart cities and industrial sensor networks.

The rotor of servo motor is made smaller in diameter and longer in length, so that it has low inertia. ATO AC servo motors are available in power ratings from fraction of watt up to few 100 watts

Selected as a Microsoft mixed reality partner representing the architecture, engineering, and construction (AEC) industry, Bentley demonstrated how with SYNCHRO XR for HoloLens 2, users can interact collaboratively with digital construction models using gestures to plan, visualize, and experience construction sequencing.

An upgraded microwave module has made the Rosemount 3308 more tolerant to difficult process conditions and therefore able to deliver a more sensitive and repeatable measurement with accuracy

The TankScan TSU1000 automated tank measurement system optimizes the distribution and collection processes while decreasing the need for manual inspections at remote tank sites.

Measuring 20 mm in thickness, the DSP300-318 is specially designed for digital menu boards, self-ordering systems, retail applications, queuing systems, interactive kiosks, video walls, and more.

Sinamics G120X has a power range of 1–700 hp (0.75–630 kW) and can operate in a temperature range from -4 to +140° F (-20 to +60° C) with any standard motor, including synchronous reluctance motors (SRM). It has an integral DC choke for harmonics and EMC performance.

The capaNCDT 61x0/IP capacitive measuring system is specially designed for industrial measurement tasks where precision is required. It detects parameters such as displacement, distance, deflection, expansion, and deformation of conductive targets.

The SD4840E2 integrated controller + drive communicates with the host PLC over the EtherNet/IP, Modbus-TCP, or Profinet network, and move commands are programmed through the host PLC’s software.

Designed to operate at extended temperatures ranging from -40°C to +85°C, the IBQ800 is suitable for use in industrial environments and vertical market segments including automation, gaming, ATM, transportation, power utility and digital signage.

The Type 7000 is designed to provide regulation accuracy and repeatability during variable high flow conditions. The large port size options and construction make it suitable to be used in arange of pneumatic control systems.

The NewTek M-375 Series transducers are available in ranges from ± 0.025 inch (± 0.63 mm) to ± 1.0 inch (±25 mm) and operate at a linearity of ±0.15% of Full Range Typical (0.25% max).

Embedded with the Qualcomm/Atheros AR9331 chipset, it boasts network robustness, stability, and network coverage with a low voltage input. Based on IEEE 802.11 b/g/n, the access point supports high-speed data transmission of up to 150MBps.