Industry Products

The design includes a fold-out keyboard, 9’’ color touchscreen, and built-in label design software with practical templates and the ability to customize control panel labels and signs as needed. Print control panel labels and signs remotely for hours with the optional battery or use the vehicle AC adaptor.

APC also requires no additional sensors or actuators, and ensures the permanent prevention of mast vibrations. APC even kicks in under continuously changing vibration conditions, caused for instance by different loading conditions or variable disturbance factors such as wind.

The four X-and-Theta stages in this series feature linear travels of: 15 mm (0.591 in.), 30 mm (1.181 in.), 50 mm (1.968 in.) and 75 mm (2.953 in.), and the rotary table, capable of continuous 360O rotation in either direction, measures 100 mm (3.937 in.) in diameter.

Installation of the ST 200 M features ABB’s patented twin terminals with captive screws for field wiring up to AWG 4. The labeling of the ST 200 M is done with lasers, providing resistance to fading to enable identification of product type, rating and approvals, even when it is installed on the panel.

The FWA8708 delivers I/O connectivity and expansion. It offers two PCIe and a Mini PCIe slot for high density PCIe payloads and an M.2 expansion slot to interface with SATA 3.0 and PCIe x4 bus for high data throughput.

The INFORM platform is designed to enable users to improve safety, efficiency and reduce downtime while contributing to overall predictive maintenance plans.

With bandwidth from 70MHz to 350MHz, 8GSa/sec sample rate, 500,000 wfms/sec waveform capture rate, and up to 200M Record Length, the MSO5000 Series delivers system performance, signal resolution and memory depth.

The PDAM120 Series size is an 2 x 3-inch platform, available in three design options; open-frame, u-channel and enclosed with its focus on its efficiency and power density of 15.27W/in3.

PTFIX distribution blocks offer a range of mounting configurations, including both horizontal and transverse positioning on standard 35-mm DIN rail and “mini” 15-mm DIN rail. PTFIX is also available in other mounting configurations, such as direct mounting with flanges and tool-free adhesive mounting.

The devices can also be integrated into redundant network infrastructures. Supporting two redundancy protocols for Layer 2 and Layer 3 eliminates the need for additional switches on the security transitions.

The GCL is designed to withstand the frequent start-stop impact loads of industrial robots and other motion control applications with impact resistance five times nominal torque.

As a stand-alone controller, the M1 master MOSAIC module has 8 inputs, 2 safety outputs, 2 status outputs and 2 inputs for Start/Stop interlock (RST) and external device monitoring (EDM).

Nozomi Networks announced its latest round of innovations to accelerate industrial cyber threat detection.

Due to the housing construction made of V4A stainless steel (1.4404) with a roughness depth of 0.6μm, the P53 STEEL HEAD is well suited for use in harsh environments such as dust, moisture and water vapor.

Balluff's family of proximity sensors are designed and tested to provide non-contact object detection in ambient temperatures up to 230 °C/446 °F. This level of protection is required for hot metal stamping, glass manufacturing, steel and aluminum manufacturing, steel forging, steam curing, and other high-temp processes.

The ATX motherboard features four 288-pin DDR4-2666/2400 DIMMs with a memory capacity up to 64GB to meet the needs of high-density computing applications.

Designed for use on any AW-Lake Gear or Turbine Flow Meter, the FAC-S produces a scalable voltage or current output for download to a PLC or other control system.

TWIN TOUCH is a touchscreen that detects capacitive touch inputs and also the pressure exerted on the panel. This feature prevents false inputs through external forces; it allows the implementation of additional input levels.

This power supply is designed to achieve power factor improvement, and ensure operation regardless of the local power company’s voltage levels and quality.

The BOXER-6750 measures 69mm x 183mm x 155mm and is fitted with the Intel Core i3-6100U or, for customers with lower performance demands, the Intel Celeron 3955U.

Smart sensors collect data and combine them into powerful analytics enable key functionality such as Power Quality Monitoring, Self-Supervision and Lifecycle Assessment,

FlexArm GH-60 tapping arms are an alternative to tapping large diameter holes manually, or via CNC, even laser cut holes - with no reaming or preparation required.

Powered by the SAM L21 Arm Cortex-M0+ based MCU, the SAM R34 devices provide sleep modes as low as 790 nA to reduce power consumption in end applications. Integrated in a 6 x 6 mm package, the SAM R34/35 family is designed for a broad array of IoT applications.

In order to offer the M12 form factor to device manufacturers for voltage supply, HARTING will be supplying the K-coding with 7kW at 630V and 16A from Spring 2019, allowing the integrated transmission of data, signals and power.

Antaira Technologies’ LNX-1600G, -1802G-SFP, and -2004G-SFP series are industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as, manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

Metso Metrics is designed to provide global mining customers improved visibility and insights into their equipment and processes with analytics, condition monitoring and predictive maintenance

The solution predicts deformations, overheating and other defects which could occur during the printing process and automatically generates the corrected geometry to compensate for distortion and defects.

The NanEyeM is also available in surface-mount chip form. The NanEyeXS and NanEyeM image sensors will be available for sampling in January 2019.

As a security gateway, LEC-6041 possesses two key hardware features, including programmable LAN bypass technology and TPM 2.0 onboard.

The Festo CPX-FB36 is the first Rockwell Automation third-party device that provides FactoryTalk Analytics for Devices (Shelby) with valve terminal health and diagnostic details.

The suite delivers visibility of operations and systems status from one source of information inside the organization.

Common applications for the RCN 6000 encoders are large-scale rotary tables and radio telescopes which can adapt their design to the encoder while the integrated stator coupling ensures alignment of the components involved in the scanning process, even if there are deviations in the shaft coupling.

The drives now offer an expanded power range, for engineers with applications from 10 to 6,000 horsepower (7.5 to 4,500 kW). The expansion brings harmonic mitigation, regeneration and common bus-system configurations to a range of high-demand applications.

The single-phase 12 V and 24 V power supply units have an input for alternating voltage which also enables the connection to direct voltage and is particularly resistant to undervoltage and overvoltage.

The “469” series model, which enables manufacturers to cater for dynamic strain application.

Rexroth‘s IoT Gateway works to bring companies closer to the strategic goal of networking all relevant machines and systems and making processes for evaluation and continuous improvement.

The Receiving/Transfer application is custom designed to suit the exact needs of the application. This includes allowing for manual control or to include the ability for automatic receiving and transfer stepswithin a facility.

The NanEyeM features a custom multi-element lens which improves the effective resolution of the sensor. The MTF (Modulation Transfer Function) is >50% in the corners, distortion is <15% and color aberration is <1Px.

This package inspection/weighing machine has top/bottom package inspection of header/side seals, printed variable data, package height inspection and check weighing in one footprint.

The EE660 is suitable for measurement of low air velocity down to 0.15 m/s (30 ft/min). It features an E+E hot film sensing element. Furthermore, the sensing element is resistant to contamination and has a low angular dependency.

The camera variations include both standard JAI green housings, as well as special white housings for systems intended for hospitals, or clinical/laboratory environments where white housings are often preferred.

These product series have an IP30 rated metal casing design that can support DIN-Rail and wall mountable orientations. The devices provide a dual redundant power input range of 48 to 55VDC with an overload current and reverse polarity prevention.

Trihedral’s VTScada 11.3 works to replace aging SCADA software by allowing users to retain a complete view of their process history. This utility imports historical data from applications based on other brands of SCADA software.

This system offers a user interface designed to be installed directly by the shop-floor employee. This means that no systems integrator is required at any step of the short set up process, and at any time later.

The DSC613 family is a single-chip solution that integrates a MEMS resonator and two low-power Phase-Locked Loops (PLLs) into a 6-pin DFN package as small as 1.6 mm x 1.2 mm.

The ICS enclosures are available in nine widths, six heights, and five depths. They feature standardized device connections such as RJ45, D-SUB, and USB, as well as a variety of PCB terminal block or connection options.

The Fluke 710 mA Loop Valve Tester allows technicians to source the 4-20 mA signal while it interrogates HART data to collect critical information about the valve’s position and status, providing checks of control valves while they are in place.

The TMPS 10 Family offers seven single output models ranging 3.3 - 48 Vout with safety approvals for IT solutions (IEC/EN/UL 62368-1) and IEC/EN 60335-1 for IoT, building/ home automation and industrial applications.

A feature of the 3rd generation Sony Pregius CMOS global shutter sensors is a Dual ADC mode where each pixel can be read out with two different gains. The PL-D757 and PL-D753 take advantage of this sensor feature by combining the dual ADC images into a single hybrid HDR image directly on camera, thus removing the need for any host processing.

Steering wheels can be mounted directly to the SWS and connected to a CAN bus. For drivers, the SWS delivers a steering feeling from its no stick-slip, no wear, integrated magnetic friction system.