Industry Products

The use of space that characterizes both the spindle and toothed belt axes ELGC and the mini slide EGSC is essential for assembly, testing, inspection, small parts handling, and desktop applications.

Airixa deploys an intelligent feature set, such as the ability to set an adaptive demand limit for each month, user-selected load reduction priorities, priorities based on production metrics and constraints, and demand response, which monitors the facility’s power loads and automatically controls those loads to match the demand with the supply.

The 5 port 10/100MB LAN M12 ports offer 148,800pps for fast packet switching with store and forward technology. The M12 4-pin D-coded, female connectors feature auto negotiation speeds, full/half duplex mode, and auto MDI/MDI-X connections.

This addition means that the controller supports two industrial safety networks – CIP Safety and Safety over EtherCAT (FSoE). The controller is optimized to support applications in industries like automotive manufacturing and food factories.

The Actin SDK can be used with any type of industrial or collaborative robot or complex articulated mechanism in any type of application, including those in the industrial, medical, Oil & Gas, agricultural, and aerospace domains.

P1100 series accommodates I/O interfaces, including 2x Intel GbE LAN, 4x USB 3.0, 4x COM, and 8x Isolated DIO. The system also supports three independent displays running simultaneously and enables 4K/2K playback via DisplayPort.

The sensors feature normally open and normally closed outputs for integration into control systems. Multiple light sources — red light for setup or infrared light source for highly contaminated or environments with water or mist in the air — enables this sensor to be used in a multitude of applications.

The Quick Changer releases end-of-arm tools with a click and inserted tools are automatically positioned correctly with a repeatability of ±0.02 mm. The Quick Changer can be used on any robot arm, drone, or other equipment with an ISO-9409-1 flange.

PS series fork sensor additions include harsh duty U-frame sensors for food applications, L-frame or angled fork sensors for mounting situations, and fork sensors for liquid detection.

Various modules providing choices among motor types, gearboxes, ball screws or roller screws, and accessories allow for custom combinations of components ideally suited for an application.

The TwinCAT 3 IoT Communicator exchanges data using a publish/subscribe mechanism. Information is exchanged via a message broker that uses the standardized MQTT protocol and acts as a central messaging service in a cloud or local network.

his combination of packaging, temperature capabilities and choice of current ratings makes them suited for Internet of Things (IoT) applications that require compact design but don’t involve continuous high currents such as smart doorbells, thermostats, ceiling fans/lights, door locks, etc.

The switch offers 24 to 55VDC redundant power inputs through 4-pin M12 T-coded male connector. A total power of 180W is available for supplying up to eight IEEE 802.3af (PoE) & 802.3at (PoE+) devices.

The LENS 860 Hybrid CA system has an 860 x 600 x 610mm work envelope, is equipped with a hermetically-sealed build chamber that maintains oxygen and moisture levels below 10 ppm for processing reactive metals, such as Titanium.

The Hand Prompt Batching Station serves a range of industrial applications where the negative effects of time consuming and problematic manual batching needs to be eliminated.

The Promass A sensor system is mounted on a base plate that acts as a “shock absorber,” effectively shielding the Coriolis measurement from outside interference, e.g. from pipe vibrations.

Manufactured in volume, these Tecnotion Torque motors feature encapsulated windings and include two types of thermistors as standard features. Tecnotion offers motor sizes from 68mm to 160 mm diameters, to date, these motors will work with any servo drives.

The MAI602-M4D80 motion control system can be used in various factory production applications such as automated optical inspection, semiconductor wafer handling, packaging and material handling systems.

With its Siship BlueDrive, Siemens provides an environmentally friendly propulsion solution with emissions down as low as zero depending on the drive configuration.

The MEG series come with universal AC input from 90Vac to 264Vac and wide operating temperature of -20°C to +70°C (with full power up to 50°C).

The AGT's sensing window is large enough to monitor 100 amp circuits. It can also be used to measure and monitor any low-value AC circuit current by passing just one of the conductors through the sensing window.

Plug & Inspect powered systems provide full autonomy to the manufacturing plant: systems immediately self-adapt to any changes in the inspected object environment, such as changes in light conditions and object location or orientation.

The Bi-Directional DC/DC converter charges a low side (12V) battery during normal operation (buck mode) and charges or assists the high voltage (48V) battery in emergency situations (boost mode). It is packaged in an 9.45” x 5.366” x 0.725” mechanically enclosed package weighing 2.86 lbs.

The pumps are suited for use in industrial applications such as foundation repair, rail maintenance and concrete post-tensioning.

The TraceNet Genesis System gives access to comprehensive heat trace circuit information, including circuit performance history, fault analysis, and circuit drawings. Using this information, maintenance personnel can predict failures.

The NSR-PG-10-20 Precision Parallel Gripper is a smart gripper available for collaborative robots, including the UR3, UR5 and UR10 robots from Universal Robots (UR).

For high load applications, the customer can drive the system with a reducer/motor combination. Additionally, the gear-to-pinion reaction loads are fully supported so the servo motor shaft is not subjected to radial loading.

The distributed force array (DFA) sensor uses Peratech’s quantum tunnelling composite (QTC) technology to provide an array of single point sensors that can be used in conjunction with a position sensor (such as capacitive) to measure force and correlate it with position.

All EyeCheck 4000 Z cameras have a FPGA, DualCore ARM processor as well as a GigE interface with Power over Ethernet (PoE). The user also gets the IP core for using the FPGA. And in addition to the EyeVision library the cameras support also other libraries such as OpenCV.

The LinX M-Series is fully compatible with standard pneumatics accessories such as mounting plates, linear guides and couplings.

The measurement of compressed air flow lines with the FS10i Switch/Monitor can provide information to the equipment’s control system in order to optimize the air flow.

The 32 A per contact, 600 V power connector is constructed with 4+PE, 8 and 12 silver-plated crimp contacts.

The RST2228P offers Power-over-Ethernet, precision timing and network communication on a single network.

The GPL series is available in seven sizes with ratios from 36:1 to 200:1. Output options for the GPL series include a solid flanged output (GPL-F) and a hollow shaft flanged output (GPL-H).

The sensors, which include a stainless-steel housing, are resistant to aggressive cleaning agents, chemicals, coolants or other media and meet the requirements for packaging, food & beverage industries.

This Absolute Arm range retains many features of the previous generation of ROMER Absolute Arm. These include the proprietary Absolute Encoders and diagnostic reporting, as well as rotating grips and a counterweight system that facilitate movement and measurement.

This open protocol has been standardized under the ANSI/ASHRAE 135-2012 specification for interoperability among systems built by different manufacturers.

The relays can be manually tripped and a trip-free mechanism is also provided. Mounting base units (TZ1H26E) can be added to enable separate mounting of the relays.

The reading window of the PXV has been enlarged to approx. 120 x 80 mm, meaning that the Data Matrix code tape is always located within the sending range.

Whether for monitoring ongoing testing process, fault analysis, condition or temperature monitoring or energy monitoring, PS Web provides a solution for measurement and testing.

Whether externally plugged in to a display or built in, the smart display module is optimized for digital signage, interactive kiosks, point of sale (POS) and video walls.

The MCC 118 provides eight single-ended analog inputs with sample rates up to 100 kS/s for taking single point or waveform voltage measurements.

The machine vision camera will offer broader visual detection and characterization capabilities of material properties as well as improved performance over conventional monochrome sensors.

It can be calibrated to measure gases over a flow range from 0.04 to 559 SCFM (0.07 to 950 NCMH), depending on line size, which is useful in low-flow applications requiring small doses.

This hazardous location control station is constructed of sturdy aluminum with stainless steel parts for additional reliability. The station is NEMA 7 (C, D) and NEMA 9 (E, F, G) rated, and includes three pre-drilled and tapped operator holes with ¾-inch NPT hubs.

The Integrated Laser Alignment System (ILAS) of the GuardShield 450L-E provides multiple visible laser points that optimize setup with a touch of the ILAS symbol on the front window of the stick.

Using the MATLAB console or scripts it is possible to read online values directly from the control system and make them available for further calculations and evaluations

The cables are available with four unshielded (CF30 series) or four shielded (CF31 series) conductors in 16 AWG to 2 AWG sizes. Individual conductors are bare copper and stranded for flexing applications.

Sensors are available with diagnostics function that can be monitored with I/O Link supporting Industry 4.0 implementation and Smart Factory operations.

AMCI’s SMD E2 Series units come standard with EtherNet/IP, Modbus-TCP, and Profinet built in. The integrated web server facilitates simple network type selection and IP address configuration.