Industry Products

The SWE440 provides an Ethernet-based system interconnect that allows single board computers, digital signal processors, graphics cards, sensor I/O cards and others to pass data at multi-Gigabit speeds

The PAC is Parker’s machine controls solution that combines PLC, HMI, and motion control functionality into a single device. Likewise, the PAC is programmed using a single integrated development environment (IDE) called Parker Automation Manager (PAM).

The Fluke 729 Automatic Pressure Calibrator is designed to simplify the calibration process by automatically generating precise test pressures, compensating for leaks, and automatically documenting the pressure calibration process to help meet compliance and regulatory requirements.

The 1.0 release of LabVIEW NXG is intended to help engineers performing benchtop measurements increase their productivity with nonprogramming workflows to acquire and iteratively analyze measurement data.

With its protocol configuration, mounting design, and interface, the SDS-3008 is a networking solution for virtually any Smart Factory application. It supports the core industrial protocols -- EtherNet/IP, PROFINET, and Modbus/TCP -- and includes built-in network monitoring and control functionality.

By wirelessly communicating with an iPad, Moku:Lab enables technicians, researchers, and students to interact with their experiment and stream data in real-time from anywhere in the lab.

This calibration verification system is designed to lower flow meter operating costs in flare gas applications aboard offshore platforms, at land-based oil/gas facilities and in petrochemical plants.

Distrix’s SDN technology, running on RAM devices, is designed to speed deployment of communication networks between industrial devices and IIoT cloud platforms, and deliver security for remote machine access.

Based on the ARM Cortex-A5 core with floating-point unit (FPU), with a 32-bit wide DDR controller that offers up to 1600MB/s of bandwidth, Matrix-710 is a choice for applications requiring computing and data processing.

Based on the QuadPod architecture from JTAG Technologies, the JT 2147/eDAK is an enhancement of JTAG ‘s current DAK interface and has been specifically designed for high-integrity ATE systems.

All models of the MPV4080S family are packaged in a 4.9 x 2.9 x 1.57 inch, encapsulated case. Each model is specified for operation over the operating temperature range of 40° C to +70°C ambient. Cooling is by free-air convection.

The solid-state operation of the Lifeline 5 cable-pull switch offers an electronic, rope-monitoring system to compensate for thermal expansion and cable sag.

The CMS-700 energy monitor and control unit can integrate up to 96 sensors, which can be displayed and processed using the built-in web server, Transmission Control Protocol/Internet Protocol (TCP/IP) or a Modbus Remote Terminal Unit (RTU).

SMAC electric grippers incorporate programmable speeds, positions and forces with data feedback. This makes them suitable for a range of positioning, measuring, and inspection applications.

With this latest release, modules are provided to expand the range of applications possible with SMARTDAC+ systems. New functions include sampling intervals as short as 1 millisecond and the control and monitoring of up to 20 loops.

Applications for the PHS series are to be found across industrial, medical and transportation markets, and specific ones include robot joint angle control, motor drive units, 3D printers, rotary angle sensors, HAVC sensors, and shift-by-wire gearshift systems.

The PIC32MK MC devices combine 32-bit processing with advanced analog peripherals such as a quad 10 MHz op amp, comparators and motor-control optimized Pulse Width Modulation (PWM) modules.

The GVC1000 is designed for a range of military and commercial applications - particularly vision computing, embedded training, 360° situational awareness and advanced digital mapping, as well as data-intensive intelligence

Designed for industrial and manufacturing applications where it’s necessary to monitor data to ensure goods don’t fall outside of acceptable parameters, the ultrahigh frequency (UHF) RFID Sensor Tags enable environmental condition monitoring throughout the shipping journey, for example, of temperature-sensitive pharmaceuticals or perishable products packed with dry ice.

QualityWorX Vision, a data management and analytics platform that harnesses machine vision image data, is intended to enable manufacturers to improve and optimize their investments in machine vision inspection.

This series is targeted at the automotive, food & beverage, packaging, and power generation industries where the application doesn’t require more extensive agency compliance.

FCI’s FLT93 Switches are ideal for applications in many demanding process industries. They also used extensively chemical processing, food/beverage, mining/milling, oil/gas, pulp/paper, pharmaceutical and more.

When many of today's devices and fieldbuses were developed, Internet, Industrie 4.0 and Big Data were still unknown. Therefore these systems lack any security features for a direct networking, such as access protection with password or signed firmwareupdates. To make existing sites „Industry 4.0-fit“ MB Connect Line and Deutschmann Automation have developed the Secure Cloud Gateway mbXLINK.

With mbNETFIX presents MB Connect Line a new firewall that has been developed for use in industrial plants. It provides protection against external attacks and fulfills the special requirements of industrial communication such as segmentation, coupling of different networks as well as the control of communication on the packet level.

The system uses Standard ATE Production IC Test Systems at DA-Integrated along with Rohde & Schwarz's R&S ZVA 67 GHz Vector Network Analyzer (VNA) to create a volume production test system capable of handling RF & millimeter wave integrated circuit devices.

The AS7261 JENCOLOR XYZ sensor is a complete platform for color sensing, intended to ease design-in and simplify production processes for manufacturers of professional or consumer colorimeters and color analysers.

The optoNCDT 2300-2DR laser sensor is especially suitable for reflective and shiny targets. The sensor is for example used in thickness measurements of flat glass, distance measurements on annealed glass and assembly monitoring of small parts

The solution, developed in collaboration with Intel and third-party logistics companies, provides real-time information about the location and condition of critical freight while in transit. The solution was introduced during Honeywell Safety and Productivity Solutions’ launch event.

These NS-Series NSF (National Sanitation Foundation) certified valves (from GC Valves) are a choice for food and beverage grade potable water applications.

The PSC-T54L is designed for industries including paper, powders, food and ceramics to wallboard, thermoforming, composites and glass.

The Sciemetric Studio suite enables manufacturers to visualize, review, report on, compare and analyze part data to improve quality and yield on the production line.

Through PE Smart Urban Network, cities can connect and control a number of services such as street lighting, public parking, energy distribution, solid waste collection, public Wifi, video surveillance, emergency response support, and more.

The transducer uses the latest generation of AMETEK’s magnetostrictive position-sensing technology to give absolute analog position, accurate to 0.04% of the programmable sensing distance.

Siemens is presenting new CPUs and 15 and 19 inch “Blackline” panels in widescreen format for the Sinumerik 840D sl CNC. The 7x0.3B PN processors are Profinet-compatible NCUs (Numerical Control Units).

The EME can be used for applications in the microscopy. The features of EME can be extended, so that it can be integrated into a fully automated, industrial inspection process.

The camera is designed for use in robotics or applications which require repetitive camera movement, as well as for any application where space is at a premium.

PI’s C-663.12 motion controller is designed for 2-phase stepper motors, in open-loop or closed-loop operation commanded by USB or RS-232.

The design is ideal for optical and scanning probe microscopy or other inspection or manufacturing applications where two-sided part access is required with three-DoF manipulation.

The SS-7 is designed to be embedded into a hydraulic cylinder and utilizes the gun-drilled piston rod as a target, sensing it’s position with-out the need for a magnet.

It comes supplied with a crossed roller bearing. The motor coil is the moving part of the assembly in order to reduce the moving mass of the system. Power is supplied to the motor via a flat ribbon cable.

The single-turn encoder is equipped with three electrically isolated Hall measuring systems to meet requirements in safety-related applications, i.e. in cases where redundant signals for monitoring do not suffice or additional signal outputs are needed to visualize the process.

The Fluke 438-II analyzes three-phase power quality measurements and uses an innovative method developed by Veros to calculate motor output torque, speed, horsepower and efficiency.

Due to their ability to connect actuators and sensors to RFID read/write heads simultaneously, the block modules are ideal for retrofitting RFID applications.

The GE Digital APM suite covers the full spectrum of APM services from risk assessment and asset strategy development through condition-based maintenance (CBM), predictive maintenance, reliability centered maintenance, root cause analysis, and inspection and compliance management.

The CPX portfolio offers a selection of screen formats, sizes, installation options and features. The range of formats includes 15 inch (4:3), 19 inch (5:4), and 21.5 inch (16:9 widescreen) versions.

The model 455 solenoid which features an explosion-proof case and ATEX and IECEx certifications for gas and dust for zones 1 and 2. This model is addressed to demanding hydraulic applications.

With I/O terminals that feature explosion protection, the ELX series expands the Beckhoff EtherCAT Terminal system, which already offered more than 100 different signal types.

EPLAN Cogineer is fully integrated into the EPLAN Platform shared by EPLAN Electric P8 and other EPLAN software products. This allows users to create project data in EPLAN Electric P8, and then generate the schematics using that data in EPLAN Cogineer without any duplication of effort.

Using magnetic paddlewheel technology and electronics, the EPR continuously measures the flow of liquids in pipes with a velocity range of 0.98ft/s~32.8ft/s (0.3m/s~10.0m/s) in pipe sizes from ¾” through 2” (DN20 to DN50).

The LPC-815 & LPC-835 can operate on a range of 9-48V DC power input making it a fit for mobile, marine, transportation, field and remote based applications.