Industry Products

The modular solution comes equipped with standardized function blocks for operation (start-up, operation, manual functions), control (speed, steam distribution, anti-surge) and protection (bearing, temperature, pressure).

The EPLAN Platform version 2.6 includes additional features for terminal design and project data management, the representation of piping in fluid power engineering, and optimized IT integration.

Designed for automotive and factory automation applications, the ASB200-909 comes with low power consumption and supports an optional 60W power adaptor, VESA mount bracket, as well as a 12V~24V DC wide-range power input terminal block on the rear of the system.

The HI 6000 series comes with Hardy’s Setup WIZARD that guides users step-by-step through instrument set up and calibration. Each instrument is UL and CE approved and available with power options of either DC or optionally AC.

AAEON’s BOXER-6403M and BOXER-6404M feature dimensions of 158 x 95 x 41.5mm and 166 x 106.6 x 52mm respectively, ideally suited for factories and factory equipment with limited space

Measurement range of the Vert-X 51 Series is 0 to 360° and physical measurements of the housing are 30 mm x 50 mm. These encoders are ideal for harsh environments with ingress protection to IP 67 and stainless steel housing and shaft are available.

These brushless linear motors are designed for a variety of medical, manufacturing, scanning, inspection, laser cutting, and precision assembly applications.

Typical applications for the Model 24A/34A Series include engine test stands, turbine rockets, diesel engine internal combustion, emissions testing, production test stands, compressors, pumps, stamping presses, rolling mills, die casting, hydraulics, and off-road vehicles.

The V920EX boasts a work envelope with a maximum turning diameter of Ø 36.22 and 33.86” of swing over the saddle enabling it to accommodate large, odd–shaped workpieces.

Bringing together existing technologies with new product releases into one integrated portfolio, Symphonite software and services offer an end-to-end solution for oil and gas, refining, and mining, metals and minerals industries.

The EV Evolution series standard features include full UL certification on all options, a compact foot print which makes this unit fit for smaller cabinets. Industries and applications include, automation control panels, electrical control panels, distributed antenna systems, and more.

AutomationDirect’s line of RUKO countersink bits now include bits to accommodate UNC, or imperial (inch), fasteners. The round shank, 82-degree taper countersinks are CBN ground from steel blanks which creates a sharper and more durable cutting edge with precise tolerances.

The Mocana Security of Things Platform secures manifold aspects of connected devices through a collection of services such as pre-boot verification, certificate management, cryptographic engines, secured data transport and secured firmware updates. The platform with integrated support for the OPTIGA TPM family will be available in Q4 2016.

Standard features include EN 55022 B emissions, active power factor correction to EN 61000-3-2, I/O isolation of 3 kVAC, and a standby 5V output.

Smart Attend is capable of collecting and organizing data for pareto analysis, individual manufacturing goal parameters with active lighting response and remote global access to historical production data

The single-output TE240 Series models are Level VI+ compliant external power supplies designed for integration with test and measurement equipment and industrial applications that require enhanced levels of performance at higher power levels.

Applications for the SDG1000X series of generators include research and education, IC and circuit testing, environmental and medical signal simulation, etc.

The ‘ZLW toolkit’ is designed so customers can customize their own solutions, including rail widths, system length, etc., for small installation spaces.

PXI Thermocouple Simulator Modules (series 41-760) are designed to simulate the operation of a thermocouple. They are available in a choice of 8, 16, 24 or 32 channels.

The devices feature a metal enclosure with a high degree of protection (IP65/67) and an operating temperature range from -40 °C to +70 °C. This provides flexibility to be deployed outside the control cabinet, both indoors and outside.

The Tank Gauging Platform is a monitoring and inventory control system designed for tank farms and terminals in the chemical, oil & gas, refining and similar industries where large amounts of liquid or solid materials are acquired, stored and transferred.

Olympus’ Vanta handheld XRF analyzers benefit a range of applications from alloy recycling, PMI and geochemistry, through to precious metal identification, QA/QC and regulatory and safety screening.

The CSF-2UP gearbox is designed for use in high precision positioning tasks in applications with limited space, such as jointed arm robots, measuring instruments and various uses in the growing medical technology market.

Brainboxes’ SW-608 10/100 MB/s Ethernet switch, uses a 2K packet size to enhance bulk data transfer and optimize system performance, has galvanically isolated ports to provide safe operation in tough environments and extreme temperatures between -40ºC to +75ºC (-40ºF to +167ºF)

This Single Channel Type K Thermocouple Amplifier Module converts the low output voltage signal from a Type K thermocouple probe to a single independent linearized 0 to 5 VDC output voltage.

Offered in either a standard 8-pin hermetically sealed ceramic DIP (MHT) or Gull-Wing SMT (GHT) package, the AM-606HT is a dual operational amplifier specified for operation up to +200°C.

Featuring digital compensation to provide pressure measurements over a temperature range from -20° to +125 °C, the TPM Series is ideal for applications in hydraulic and pneumatic systems, and for fuel and lubricant pressure sensing, leak detection, filter testing and tank level sensing.

The latest version of UniSim Design Suite process modelling software is designed to help industrial manufacturers increase their engineering effectiveness and optimize their process designs.

Features include a linear encoder option on PRO-SLE ball-screw stages, absolute encoder options on both the linear motor and ball-screw stages, and direct mounting to English and metric optical tables.

With these mounting frames, this series of rugged connectors, widely used in the rail and mass transit industries in particular, can host up to eight Han-Modular single modules instead of the usual six.

FLOPPYFlash is designed to provide a solid state replacement for obsolete, electro-mechanical floppy disk drives in legacy industrial process control systems and equipment as a direct, drop-in replacement.

Miki Pulley CSZ Clutches feature an integrated bearing design. CSZ Clutches operate well in temperatures from +14°F to +104° (-10°C to +40°C). Available in bores ranging from 10mm to 15mm, with brake torques ranging from 1.77 ft. lbs. to 7.376 ft. lbs. (2.4 Nm – 10 Nm).

The Glide-Line 360 is a combination of powered timing belt based conveyors working together with a family of devices. Used as a centralized hub, the Glide-Line 360 can help solve complex pallet, work-piece and panel handling distribution challenges.

Okuma’s GENOS L3000-M one-saddle lathe is designed for cutting a wide range of exotic materials. At IMTS 2016 the GENOS L3000-M will be cutting a steel pinion drive for the automotive industry with Iscar tooling, a member of Partner’s in THINC.

Net I/O is an Ethernet-based digital I/O and control interface add-on for users of Total Vu monitoring and control software. The add-on provides isolated switch inputs, Form C relay outputs, encoder input, and precision timer-controlled Form A relay outputs.

The models ST51A, ST75A and ST75AV Thermal Mass Flow Meters provide users with a solution to measuring air or gases in demanding industrial process and plant applications.

The product is designed to provide connections with its support of cellular communication features such as multi-ports to LTE routing, LTE/WIFI auto-offload, WAN to LTE Redundant, Dual SIM standby, SNMP and Mobile Manager Server for remote monitoring.

Racer5-0.63 and Racer5-0.80 are both controlled by the R1C 19" rack-mounted controller, which can be integrated into a single cabinet to control an entire line.

The ProLine P50000 series from Knick was specially developed for voltage and current measurement in main and auxiliary power circuits of locomotives and multiple units.

Omron’s Mode E3Z-T61 photoelectric sensor has a top-level sensing distance, and allows sensing distance to be as long as 30 m.

Resistive type touch screen monitor displays 1366 x 768 resolution, supports VGA and DVI video input, and is panel mount or VESA mount ready.

Designed for process control and quality assurance, the cameras are available with 10 field-of-view options, from 8 degrees up to 90 degrees, to give users the option to pinpoint a single target or monitor a large area.

Each FlexorSet is a multichannel data converter sub-system with programmable analog I/O signal interface suitable for connection to HF or IF ports of a communications or radar system, and supporting signal bandwidths up to 100 MHz.

These stainless steel fork sensors are available in 50mm and 80mm widths and are designed for the food and beverage, packaging, metalworking and pharmaceutical industries.

The OptiFZP is designed to offer productivity with reliability and accuracy with an interface on a 7” color touch-screen allows users to start a test with a touch of a button and view a real-time graphic display of the test.

This software component from C3D Labs works with polygonal 3D models. Scenes are split into segments and then represented by graphics. Each segment can have its own set of characteristics: absolute and relative matrices, data, and an array of geometry representations.

This design from MMP utilizes an ‘All-Steel” drive pinion, thereby increasing the force capacity, while maintaining the 5:1 Reduction Ratio which allows the unit to maintain a 2” per second stroke speed.

The M12 cordsets are ideally suited for the food and beverage, pharmaceutical and chemical industries where a washable connector is required.

SCADAware developed its StatusWatch product line to monitor asset utilization and analyze plant efficiency. StatusWatch Live’s primary focus is on live data relevant to the current situation on a shop floor.

The C/B 3500 Series provides a solution for the most extreme environments including military, transportation, alternative energy, and process control systems.