Industry Products

Development efforts for the 3.0 release focused on providing features and functionality based on performance, quality and usability feedback, collected with the previous version

The Liquatite conduit, by Electri-flex, is designed for a wide range of uses in the electrical industry, including motors, lighting, electric signs, elevators, pools/fountains, enclosure connections, and more.

The Manta G-319 powered by the 3.1 megapixel Sony IMX265 sensor, and the Manta G-507 utilizing the 5.0 megapixel Sony IMX264 sensor will provide options for high-quality imaging.

PanoTek controllers are offered in a range of scalable configurations and are well suited for a variety of markets, including digital signage, boardroom, operations/process control, and security & surveillance.

The MXE-5500 Series sustains performance at -20°C to 70°C*, shock up to 100G, and vibration up to 5 Grms, making it a solution for ITS, surveillance, and industrial and logistic automation

The measuring system is based on the photogrammetry method and is designed to make industrial measuring robots easier and more flexible to use

This product development combines PA&E's hermetic RF connector technology with MIL-DTL 38999/23 Series III shell interfaces.

The range is designed to provide users with a number of design improvements on conventional PushIn terminals and satisfy demanding requirements regarding ease of use and mechanical stability.

The ball-pretensioned predefined positional system is deisgned for stepped locking. The drylin preload prism slide is suitable for manual adjustments wherever displacement forces and a "full" high quality run while moving are desired.

The CAT III 600V / CAT IV 300V rated Fluke 902 FC performs the essential measurements of HVAC systems — microamps for testing pilot light sensors, resistance up to 60 kilohms, AC current, AC/DC voltage, capacitance and contact temperature. The awards were chosen by an independent panel of HVAC contractors.

The new line incorporates a variety of flame detection technologies that will provide coverage for a wide range of process industries, including upstream oil and gas installations, chemical plants, and refineries.

The OnePick allows products to be picked and replenished in an automated way in combination with delivery and takeaway conveyor, via the introduction of a secure delivery interface window.

Using adaptive drive angle adjustment, the DRV10970 is designed to achieve optimized efficiency regardless of the motor parameters and load conditions.

The product’s CANopen interface supports CiA DS301: CANopen Application Layer/Communication Profile and DSP402: Device Profile for Drives/Motion Control.

Originally available with just a 3-pin Deutsch, the 2-pin option allows the 784 Series to serve a wider range of applications, including those with limited installation space.

Version 8.2 of Simatic PCS 7 offers networked plant monitoring. Web systems can now also be operated and observed over the Intranet/Internet with Simatic PCS 7

RoHS-approved materials and tribologically-optimized plastic blends to help the A181 perform in both rotary and pivoting movements in bottling, packaging, and processing applications.

Dematic RapidStore UL1400 is an alternative automated storage and retrieval system (AS/RS) that is designed to retrofit into existing manual warehouses with low to medium building heights.

Typical applications, for the IGD962-8A would include high frequency welding systems, solar converters, uninterruptible power supplies (UPS) and automotive/appliance motor drives.

The solution will help industrial plants optimize automation project execution, reduce loop commissioning time, minimize operational risk and protect intellectual investments while keeping current with today’s technology.

The portfolio covers direct and indirect press hardening as well as pressure controlled hardening (PCH). Solutions are provided for various process stages: position control before and after the oven as well as in the press; parts temperature monitoring before and after the press; and temperature monitoring of the tappet guide rails.

The tGW-735i allows a Modbus TCP host to communicate with up to 3 serial Modbus RTU/ASCII devices through an Ethernet network, thus saving the cabling costs

Designed for all EA3-series C-more Micro panels, it adds an Ethernet (RJ45) port for programming and PLC communications at 10/100 Mbps.

The electrically-driven E-Cart is designed to handle the heavy loads associated with assembly operations, and with the new assembly-focused, anti-tip configurations it can remove the barriers found in traditional assembly layouts with vertical conveyors

Areas of application for these encoders include oil and gas facilities, underground mines, chemical plants, milling operations and grain-handling facilities.

The NCM01-04-001-2IB and the NCC01-04-001-1X are designed to be miniature versions of H2W's moving coil and moving magnet voice coil actuators

High Cycle-Life On/Off Angle Seat Valves

The GA26W is equipped with standard chatter control function that automatically adjusts wheel speed for accurate, stable machining, and a 7.5kW grinding wheel spindle, ideal for grinding mass produced parts.

The Han ES Press connector is based on a cage clamp terminal and enables installation and contact bridging with prefabricated jumpers.

The D200 precision laser driver is supported by up to 4 amps of regulated drive current with a built-in edge-triggered pulse generator provides up to 1us pulse widths.

The compact camera design fits on the UR wrist and offers direct connectivity to the controller, while the camera software is embedded within the user interface.

The 2271A is ideal for calibration laboratories that are adding pressure calibration services because it features a range of pressure measurement capabilities.

Featuring time-of-flight technology, the laser measurement sensor ensures accurate distance measurements out to 12 meters. This enables sensing in long-range applications, including loop control, part presence or absence and fill level.

Measuring 3.000 x 5.000 x 1.382 inches (76.20 x 127.00 x 35.12mm) with a density up to 18W/inch3, the CFM300M series has a wide universal input voltage range of 90~264VAC and is available in single output voltages of 12, 24, 36, and 48VDC.

The PyroNFC-K has a simulated thermocouple output, to enable the use of IR temperature sensors in place of thermocouples. Its side-entry cable and length of just 29 mm make it easy to mount in confined spaces.

The MR-J4-TM includes standard IEC61158 Type12 CAN application protocol over EtherCAT (CoE), IEC61800-7 CiA402 drive profile. It also comes with add-on instructions for EtherNet/IP networks using ControlLogix or CompactLogix controllers.

Exaquantum is a plant information management system that is used in many industries. Release R3.02 provides improved web and data analysis functions that will enhance plant operations.

Tara is based on the 1/3-inch MT9V024, a WVGA Global shutter monochrome CMOS image sensor from OnSemi. This stereo vision camera provides synchronized sensor frames to the host machine over USB 3.0 interface.

With security solutions architected to be integrated, automated and simple to use, the Cisco security portfolio provides companies an effective approach for securing their digital business models.

Applications will include Lead Frame inspection for die placement, epoxy and wire bond as well as demonstrating new surface inspection capabilities.

The RM Series rotary switches are designed for use in next-generation building automation systems, including lighting and fan controls, and test and measurement equipment.

Designed for semiconductor processes that demand fast response and repeatable delivery of process gases with high- and ultra-high levels of purity, the GF100 Series is made to ensure precise and stable process gas flow control over time.

The ISL70617SEH enables higher common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR), at all gain settings. Designers can program the in-amp’s gain from 0.1 to 10,000 using two external resistors.

The GLX-3 welder from Branson, an Emerson business, is designed for large-format parts that require greater laser and clamping power.

Each of the Zen units has a narrowed scope of application to make it easier for consulting-specifying engineers to identify the unit that best matches their application needs.

GAM’s SPH Flange Gearbox has a single piece steel housing and ring gear machined directly inside for maximum stiffness.

Typical applications for the LGR-ICOST Model 950 include monitoring trace components in calibration and industrial blanket gases; hydrogen and hydrocarbons; fuel gas and natural gas pipelines; stack gases; and many more industrial uses.

The multi-spot measuring principle from Baumer is based on the light section method. In the sensor, up to 600 measured values of an object are recorded and the distance is then calculated on the basis of intelligent analysis.

The ME-IO can accommodate up to 60 connection points in an 18-mm wide package. If the job requires more space for complex designs or larger components, larger widths of 37.6 mm and 75.2 mm are also available.

These products are based on ADLINK’s Modular Industrial Cloud Architecture (MICA), an industrial-grade delivery system designed to support the native virtualization requirements for software-defined networking (SDN) and network function virtualization (NFV)