Industry Products

ADA-13040MG converter is used for data transmission between devices equipped with RS485/ RS422 interface via LAN/WAN network. In the ETHERNET network converter can operate in Virtual Serial Port mode, TCP serial bridge mode, UDP serial bridge mode, TCP sockets, UDP sockets and MODBUS Data Gateway.

MAX14900E digital output switch increases throughput by up to 70x for PLCs, HVAC, and industrial equipment.

AQM-103 measures CO concentration, humidity and air temperature. Price Starts at $230

V-273 actuator reads the actuator‘s force and position sensors in parallel and seamlessly switches from closed-loop force control to position control.

The 3051S makes process measurements in applications requiring high static pressure capability of up to 15,000 psi (1034 bar).

Software can be embedded into a drive during development to allow connection to EtherNet/IP, EtherCAT, and Profinet/Profibus.

Software enhancements include a modern and intuitive graphical user interface and an editor for the creation of customer specific print labels.

The motors are available with a shaft end for open-loop or sensorless control or with an integrated optical encoder NOE1 with up to 2000 increments/rotation.

Hilscher’s netX chip is at the core of our embedded networking products. One chip, 17 network protocols, 33 stacks—all with the same driver interface.

With OPC UA Client and Server, CX8091 can serve as data collector for comprehensive energy management in plant environments

ISO 15552 DSBG large cylinders are offered in 160 and 200mm sizes, and deliver 2,700 and 4,200 pounds of force respectively.

PM-3133-240 can be applied to both low voltage primary side and medium/high voltage secondary side and helps users obtain accurate energy consumption data.

FBL2360 intelligent controller is capable of simultaneously driving two brushless DC motor up to 60Amps each at up to 60V. Price: $595

Camera is based on the SONY IMX250 Pregius CMOS Image Sensor with 2464 x 2056 resolution.

The IP core for Sercos III master and slave controllers includes all hardware functions, such as timing, synchronization and processing of cyclic and non-cyclic data.

These cables remain flexible enough to work down to -40°C, and carry UL -60°C cold bend and UL/CSA -40°C cold impact listings, as well as an FT4 flame rating.

Micro Motion F100P and HPC010P meters measure accurate flow rates for wellbore chemicals injected at high pressure conditions.

Bi-directional Wireless I/O system can be deployed within a few hours and requires no software configuration.

ÖLFLEX VFD 2XL, UL TC-ER rated motor cable is an oil-resistant shielded design for use with variable frequency drives

The versatility of the Mencom M23 connectors makes it perfect for applications such as servo drives, motors, and encoders. The 12 and 19 pin configurations are commonly used for standard industrial signal and control applications as well. The “M23” refers to the size of the thread used to mate the cable to the receptacle.

The WIFI can be used for connecting to the Internet via a local access point or for operating the device as a WiFi access point.

Enhancements include application Dynamic Linking and Loading (DLL) capabilities for connected embedded devices.

GOT815-834 is a 15-inch stainless steel panel computer featuring a multi-touch and full flat front bezel.

Platinum DPM has a bright 3-color (red, green, amber) 9 segment LED display with a wide viewing angle and full scale positive and negative readings. Price Starts at $150.

Several dynamic disk seals are available in the 8590 to meet temperature conditions that range from low-to-moderate up to 538°C (1000° F).

With two branches accessible on the module a user can easily power up to 12 different devices.

Adaptive Vision has released version 4.2 of its flagship product - Adaptive Vision Studio, the most powerful graphical environment software for machine vision engineers.

Line-of-sight FlexSight LS2000 continuously monitors combustible gas levels between two points at a range of over 100 meters.

The cable incorporates power and signal wires, all in a single flat cable package, and provides EMI/RFI suppression when continuously flexed or routed through tight spaces.

ST-RVS includes a Matrox GigE camera (1920x1448 pixels), C-mount lens with zoom, focus and exposure control and LED lighting. Price: $4,000.

Floodgate Security Framework (FSF) protects embedded devices and systems from cyber-attack.

The FPGA allows image capture and image evaluation to be realized in real time.

IXARC rotary encoders combine incremental and absolute rotation measurement capabilities in a single, compact package.

SK 180E and SK 200E controllers and SK 520E cabinet inverters now offer an integrated PLC.

Preplanning manages a project's machine/plant system overviews and automation structures in parallel.

The hose features a polyvinylidene fluoride (PVDF) liner tube, which provides increased resistance to the effects of acid and lower permeability with methanol and other similar fluids.

The web-based event engine can trigger I/O and relays or send SMS text messages based on real-time operational data.

Energy Advisor helps process manufacturers reduce energy costs by up to 10% annually through improved energy targeting and utilization

Enhancements in Platform 2.5 include page/area-specific revision management.

Enhancements include part matching and a machine vision library.

The solution consists of a VHDL-designed PROFIBUS controller and processor on which runs the entire protocol software.

LMSLA12 measures speed and position for marking and labeling.

Machine builders are constantly looking for ways to improve their machines while reducing costs and complexity. The new Allen-Bradley PowerFlex 527 AC drive from Rockwell Automation can help them achieve those important goals.

Rockwell Automation has introduced its new OptiSIS solution, giving industrial operators a pre-engineered safety instrumented system that can help ease deployment and reduce lead times for small and midsized process applications.

Rockwell Automation announced the release of the FactoryTalk Historian Machine Edition (ME) v3.5 module, enabling off-chassis data collection from a modular historian for the first time. This release allows operators using Allen-Bradley ControlLogix and CompactLogix controllers to easily collect data from controllers and devices connected via the Ethernet network.

Proliferation of dangerous counterfeit medication is a global concern. Impending regulations across markets will require pharmaceutical, medical device and consumer packaged goods manufacturers to trace products down to the individual saleable unit across the supply chain. Rockwell Automation has introduced its new holistic serialization solution to help manufacturers comply with these regulations. The offering can strengthen supply chains and produce a number of business benefits beyond compliance.

Medical device manufacturers that combine discrete and batch processes in their operations can now use Rockwell Software PharmaSuite manufacturing execution system (MES) software from Rockwell Automation as their sole track-and-trace platform, achieving tracking capabilities down to the smallest saleable unit.

Rockwell Automation has expanded its Allen-Bradley Stratix family of industrial switches with the Allen-Bradley Stratix 5400 switch, an all-gigabit option that helps manufacturers achieve higher network speeds for their increasingly high bandwidth applications.

Rockwell Automation has added a new custom-device plug-in capability to its FactoryTalk AssetCentre v6.0 asset-management software. System integrators can now develop re-usable plug-ins to connect the software to unlimited third-party devices. For manufacturers, this connectivity expands monitoring, backup and recovery capabilities for their critical automation-related assets.

Rockwell Automation has introduced a HART-enabled Allen-Bradley FLEX I/O-XT module, an industrially hardened I/O platform that helps OEMs and end users reduce wiring, installation time and enclosure costs.