Industry Products

Series 2260B Programmable DC Power Supplies include two 360W and two 720W models for benchtop, embedded and manufacturing test applications.

SAMBA PLC has a 3.5” QVGA 16-bit touchscreen that supports 24 user-designed screens, and up to 40 images per application.

The rugged RM6380 is built with MIL-STD-810G compliance. It provides high image quality with its 20.1 inch LCD screen that supports 1600 x 1200 resolutions. This new 9U monitor is deal for mission critical applications that can’t afford any down time.

SPIDER II 16TX EEC and SPIDER II 16TX/2DS-S EEC switches have have a metal housing, can withstand extreme heat and cold, and are approved for use in environments with a high explosion risk.

SyncAlert real-time notification and escalation software quickly notifies the right resource about problems while tracking the results.

The side switch guards avoid inadvertent actuation and all models can be installed with seals to reinforce switch actuation control.

RN4020 Bluetooth LE Smart module includes all of the hardware, software and certifications that designers need to easily add this low-energy connectivity to any design.

The battery-powered THZ WirelessHART assembly transmits temperature and HART diagnostic information to a WirelessHART gateway in situations where power is not readily available.

Version 3 of the USB Fieldbus Interface now has multiple options for commissioning and configuring FOUNDATION fieldbus devices.

The SLA incorporates precision Cross Roller Guides with anti-creep protection for increased stiffness and lower friction.

The TW6872/4 end-to-end solution delivers HD quality at twice the distance of typical HD-SDI solutions and can offer customers significant cost savings by enabling the use of existing cables when upgrading.

MI805 Mini-ITX Motherboard has an Intel Celeron J1900 quad-core processor with a clock speed of 2.0GHz and up to 8GB of memory.

The Series WE31 incorporates a full port 3-way NPT stainless steel ball valve for flow rates with minimal pressure drop.

GROOV-AR1 hosts groov mobile operator interfaces for virtually any automation system.

IAQM-THCO2 is capable of measuring air temperature, relative humidity and CO2 levels.

SYS-405Q fanless quad-core Intel Atom E3845 based industrial computer has USB, dual Ethernet, mini-PCIe and serial ports housed in a rigid aluminum alloy enclosure.

Designed to eliminate resonance in stepper motor ball screw assemblies, the two part elastomer element dampens vibration caused by the actuator carrier struggling to find its home position.

EN50155-certified RCS-2000 series is based on the Intel Quad-Core Atom E3845 (Bay Trail-I Premium) processor platform.

C2 Floor Scales are built for harsh chemical and wash down industrial environments, yet are easy to use and install with the latest advancements in weighing technology.

These sensors are designed to be integrated into applications where they can be mounted in enclosed devices.

RMC6224A features 4 low profile PCIe backplane, single Xeon E3 Quad Core processor and an embedded Micro ATX motherboard.

i146-SCE is a modular DC servo drive, developed to meet requirements of Marine & Subsea market.

For control rooms and big data analytics labs, F50 offers a combination of high resolution and active 3D stereo at higher frame rates.

A2-PAC has a Sercos or EtherCAT master interface and onboard I/O.

For control rooms and big data analytics labs, F50 offers a combination of high resolution and active 3D stereo at higher frame rates.

CPT now provides up to 100W of output power @ output voltages of 2.5, 3.3, 5.0, and 12Vdc, ideal for distributed power architecture applications or as a fully regulated intermediate bus converter.

Series SN Solenoid Valves easily mount directly to pneumatic valve actuators reducing the need for tubing, fittings or brackets, thereby reducing assembly cost.

Eco-L motor soft starter is a motor starting and protection device that is integrated with power electronic technology, microprocessor and automatic control.

Touch Robot is able to perform precision grinding and machining to polish, deburr, and deflash cast and forged parts.

X-CPU 31 CPU for small and mid-range safety applications integrates all functions of the system bus module.

Used with applications where water is present or used in a hose down procedure, the stainless steel cable glands are robust and corrosion resistance.

These units feature a BA-C pump coupled to a diesel engine, including the control panel, and mounted on a high quality, galvanised sub-frame.

The feed-through terminals are now available for wire cross sections between 16 and 120 mm², thereby covering a total range of 0.08 to 120 mm².

Type P99 gas pressure regulators help to maintain consistent inlet pressures to downstream equipment, allowing for the accurate control of distribution system pressures, even with widely varying flow rates and supply pressures.

HiLCOS 8.9 now has integrated Parallel Redundancy Protocol (PRP) technology, a new industry standard that allows systems to overcome network failures without affecting data transmission.

NSM-208A Ethernet switch supports 10/100 Base-TX and features 10/100M auto negotiation and automatic MDI/MDI-X crossover for plug-and-play.

mbSECBOX detects malware similar to STUXNET and other possible threats to Siemens S7 PLCs.

GEVA-312T is a stand-alone system with a built-in touch screen display that delivers flexibility and easy migration with multiple GigE ports.

reACTION allows extremely time-critical subprocesses to be managed using standard hardware, all within the requirements of IEC 61131.

The SCS family of air or liquid cooled energy storage solutions is for mission critical or remote location requirements that need to perform under extreme environmental conditions.

The camera features 4 MP 60fps global shutter sensor and quad core Intel Atom 1.9 GHz processors, FPGA co-processors, and flexible software support.

The system comes in standard 2x2, 3x2 and 4x2 tiled LCD set-ups, featuring a bezel as narrow as 3.5 mm with the Overview OVD and KVD series.

The Blackfin processor delivers 800 MMACS of processing power at less than 100 mW and includes up to 1 MB of internal SRAM, eliminating external memory in many applications.

Enhancements include a TFT LCD with improved display characteristics and a design that facilitates easy maintenance.

The AC10 Micro Drive is a simple, reliable and economical AC motor speed control for 0.25 HP to 30 HP applications. With compact size and features normally only associated with higher specification drives, including sensorless vector mode, output frequency up to 650Hz, and a full 150% overload at 0.5 Hz for 1 minute, AC10 provides an optimized solution for machine builders looking for a compact, cost-effective, UL listed drive without compromising on performance.

The Hot Standby system uses both hardware and software components to create a control system with redundant PACs, capable of interfacing to a wide variety of I/O devices.

This hazardous area transmitter meets the requirements of moisture measurement applications where explosion-proof rather than intrinsically-safe certification is needed.

Universal Valve Actuator permits the use of a single motor and control software to operate virtually any Valco or Cheminert rotary valve, both two position and multiposition.

The FMC-500 is a high-speed digitizing and signal generation FMC IO featuring two 500 MSPS A/D channels.

Applications include wireless infrastructure sites, indoor/outdoor DAS (Distributed Antenna Systems) requiring low PIM (Passive Intermodulation) performance.