Industry Products

To keep cables separated and free from premature wear, modular separation components can be easily incorporated into any Energy Chain System. Available in both vertical and horizontal arrangements, using separation components prevents cables and hoses from chafing, twisting and corkscrewing and as a result, significantly extends their service life.

IntelliBox enables customers to connect industrial, commercial, medical, retail and security equipment to IP networks and the Internet to automatically monitor and respond to events in real-time with no human intervention. Triggered by an event, the IntelliBox automatically responds with pre-determined, user-defined responses.

USB-4716 200 kS/s 16-bit multi-function USB I/O module includes a USB connector with screw fasteners and a DIN-rail mounting kit. It draws power directly from the USB port and therefore does not require an external power supply.

Beckhoff Automation has introduced the C6920 and C6925 Industrial PCs. These PCs feature 3 1/2 inch motherboards, which make it possible to utilize Intel Celeron M or Pentium M processors up to 1.8 GHz. Despite the processing power, C69xx PCs are incredibly small, measuring 2.6” x 9.1” x 4.6” (W x H x D) in the “largest” housing configuration. Assembled with thick plating, the PC housings are still built to last like all Beckhoff Industrial PCs.

IndraMotion for Metal Forming Roll Feed system contains pre-defined, user-activated functions needed for specific applications such as roll feed and a flying cut off. All the user must do is set the length, speed and quantity parameters. One model uses standard fieldbus protocols (Profibus, DeviceNet).

The BIMETAL Dual-Mode Remote Thermometer provides on-site indication of process temperature conditions, and simultaneously provides a mV or ohm signal proportional to temperature for input to a transmitter, Remote Terminal Unit (RTU), controller, recorder, indicator, PLC, DCS or SCADA system.

Enhancements include an integrated module for electronic flow measurement (EFM) applications, support for additional master protocols, enhanced system and query processor performance, optimized vector graphics, a sophisticated scheduler utility, an expanded driver library, increased security and alarm management.

Designed to make use of available ceiling space, the Cobra s800 Inverted robot is ideal for over-the-belt high speed packaging for multiple industries, including food and beverage, medical, pharmaceutical, personal care products and electronics.

Rolly 1000 high-speed desktop thermal printer for volume printing of wire markers and adhesive labels has 300 dpi resolution.

Mini PCI fieldbus cards support PROFIBUS, CANopen, DeviceNet and Ethernet networks. The resulting smaller PC size saves valuable control cabinet space, but, like standard PCI fieldbus cards, the interfaces are optimized for fast controllers and real-time tasks.

RF switch modules for 50 and 75 Ohm RF applications include 11 new 4x1, terminated 4x1, dual 4x1 and 8x1 multiplexers as well as quad (4) SPDT and dual-terminated SPDT general-purpose configurations. All have relay count tracking, which allows engineers to keep track of relay closures.

ACME Threaded Shaft Collars provide optimum axial power for applications such as stroke limiting, gear and bearing nuts, or height and spring tensioning. Precision machined with right- or left-hand threads to match ACME shafts, these collars are offered in steel and stainless steel.

The LTQ linear ion trap mass spectrometer with Electron Transfer Dissociation (ETD) provides peptide structure information not available from conventional dissociation methods. It is suitable for protein/peptide characterization, post-translational modification (PTM) analysis and top-down or middle-down sequencing of proteins and peptides.

MultiComponent 2750 Encoded Photometric Near Infrared (EP-NIR) process analyzer covers a spectral range of 1375-2750nm, allowing users access to combination bands between 1950nm and 2750nm. It processes100 scans/second, resulting in high sample throughput, real-time quality control monitoring and extreme sensitivity through spectral averaging.

GE1650 high-resolution, progressive scan, 2-megapixel CCD cameras operate at video frame rates of 30 Hz or more with 1600x1200 resolution for machine vision and industrial inspection applications. Both color and monochrome models are available with either standard C-mount or optional F-mount.

Series CA44 two-station valve manifolds comply with AS-I specification V2.11 Rev. 1. Manifolds are avaiilable with or without digital inputs, and with or without auxiliary power. Plug-in valve design simultaneously makes both the electrical and pneumatic connections when plugging the valve into place - eliminating the need to disturb electrical wiring connections.

Miniature Ball Rail Systems are now avaialble in sizes 7, 9, 12, 15 and 20 in the standard version and sizes 9, 12 and 15 in the wide version.

Field Device Manager R301 supports both the latest Electronic Device Description Language (EDDL) and Field Device Tool (FDT) with Device Type Manager (DTM) technologies without the use of conversion tools or add-on devices. It allows configurations to be managed, monitored and changed for a large number of HART devices. Additionally, Field Device Manager can support Profibus devices through FDT.

VPort 351 one-channel industrial video encoder provides D1 resolution @ 30 FPS and supports a dual MJPEG4/MJPEG algorithm, making it especially well suited for use with distributed surveillance systems in critical industrial applications. It meets UL508, Class1, Div. 2, making it suitable for transportation, utility, and manufacturing systems.

Complementary to the entire family of CIP Networks, CompoNet meets the requirements of applications using large numbers of simple sensors and actuators by providing high speed communications with configuration tools and combining this with efficient construction, simple set-up and high availability – all on a single network.

Absolute SSI DuraCoder is available in either single-turn or multi-turn configurations. An optional 5/8" diameter shaft has a 100 lb radial load and a 50 lb axial load rating.

At IMHX 2007, IAS Industore will be exhibiting Hänel’s automated storage systems that have revolutionised warehousing and materials handling across the manufacturing, engineering and aerospace sectors.

The SRM7210E long-range, high speed 900 MHz radio modem has speeds of up to 800 Kbps and a range of 20 miles. Using “Wideband Frequency Hopping” technology, the modem provides data rates up to six times faster then standard Frequency Hopping technology.

ClearView meter is offered in two models: ClearView H2O for water applications and ClearView + for oils & chemicals, such as solvents and coolants. The meter is available in a variety of sizes and porting options, including NPT and BSPP in brass or polysulphone. Measuring accuracy is ±5% of full scale, with repeatability of ±1% of full scale.

SRM6310E-EU wireless Ethernet modem meets European CE Mark and ETSI RF regulations, and has Class 1 Div 2 certification.

Modular MC600 six-Channel Controller provides continuous gas monitoring when equipped with gas sensors/transmitters. It has dual redundant Modbus communications, Type 4X housing, and an optional onboard 115/230 VAC power supply that provides Class I, Division 2 classification.

TS Series Hydrogen Sulfide Gas Detectors sense H2S over a range of 0-100 ppm. The TS4000 displays H2S gas concentrations and provides complete status to the Control Room. In addition to H2S, the TS400 detects many other toxic gases.

Multi-Spectral Infrared (MSIR) FL4000 Flame Detector has been certified by Factory Mutual (FM) for application in hazardous environments.

The HazardWatch System's controller, hardware configuration and software have been tested and certified by Factory Mutual to verify NFPA 72 compliance. This includes certification for central station monitoring, as both a fire alarm panel and gas controller, for fault tolerant digital communications, and as a releasing control panel.

The wireless Wtrans T01.G1 temperature probe provides mobile and/or stationary measurement of temperature. The sensor is located in the probe grip and protected by a water-tight case. The radio frequencies used work well in an industrial environment.

VBA family of I/O modules for AS-Interface specification 3.0 is CE marked and UL listed. It supports extended addressing with 4 inputs and 4 outputs for up to 62 nodes per network.

Based on the Intel Celeron processor, the Viking III improves the speed of execution of floating point calculations, such as PID controls, Fuzzy Logic, and advanced C++ algorithms.

STAC6 220 VAC Stepper Drives provide software selectable resolutions from 200 to 51,200 steps/rev at speeds up to 50 rps. Self-Test and Auto Setup measure and configure motor parameters automatically, while anti-resonance technology eliminates midrange instability for higher motor speeds and fuller use of available torque.

Version 5.0 of ISaGRAF has been confirmed by TÜV Rheinland to be compliant with the requirements detailed in the IEC 61131-3 standard. ISaGRAF 5 incorporates both the IEC 61131-3 and IEC 61499 standards.

J Comm BCMS fits under a raised floor and monitors current, voltage, and other power related measures for up to 168 branch breakers. It helps track and control power usage in all distribution equipment.

The DNCE screw-driven linear actuator has a nonrotating round piston rod suitable for conversions from pneumatic to electromechanical automation. the DNCE is a drop-in replacement for the Festo DNC and other pneumatic cylinders based on ISO standard 6431.

PrismTech and Green Hills offer a complete Software Communications Architecture (SCA)-compliant Software Defined Radio (SDR) Operating Environment (OE) running on the INTEGRITY real-time operating system.

Profit Suite comprises advanced process control technologies that enhance the capabilities of a facility’s distributed control system (DCS). The new version increases operator effectiveness in the control room, troubleshoots a broader array of process issues, is easier to implement across third-party control systems and reduces the effort required for system maintenance.

Enhancements include a real-time productivity dashboard showing machine status, production rates, cycle times and OEE calculations, plus e-mail alerts that are sent when performance targets aren't being met.

The UAG platform creates and manages application and configuration data for a PLC-based process control solution and the associated HMI and SCADA system. This gives users one tool to design a complete automated solution.

DPR-F and DMD-F Series probes are fiber-optic coupled versions of Axiom’s DPR Series conventional and DMD Series diamond-tipped ATR probes. The probes use silver halide optical fibers to provide flexible coupling between the probe and an FTIR mid-IR spectrometer. These probes are suitable for use with strong acids and bases as well as other aggressive chemistries.

Enhancements to xCoupler plant to business system data modules include message acknowledgement, handshaking and store-and-forward features. These modules work with Rockwell Automation ControlLogix PACs.

The RHDi uses precision bearings, metal code disks, proprietary custom LED illumination, and custom Opto-ASIC circuitry. It comes with a standard 2.6” square mounting flange, and can operate in temperature extremes from 100°C to -30°C.

IR5000 can be configured for detection of hydrocarbon gases in the 0-5,000 ppm meter and 0-5 LEL meter ranges at distances of 20, 100 or 130 meters. It can be used effectively in applications where a single monitor can cover a line of several potential leak sources, such as a row of valves or pumps.

Quattro s650 robot has a 4-link parallel drive and carbon fiber construction to provide packaging cycle times which are twice as fast as previous packaging robots at up to 240 pick-and-place cycles per minute. Applications include light payload packaging and handling in the food, consumer goods, cosmetics and pharmaceutical industries.

Medalist i3070 in-circuit test system for printed circuit board assembly has advanced algorithms that increase analog test throughput by up to 50 percent, compared with legacy Medalist systems.

The DataMan 100 reads 1D and 2D codes including UPC/EAN/JAN, Code 39, Code 128, Code 93, Interleaved 2 of 5, Data Matrix, QR Code, and microQR Code. They are suitable for identifying items marked with 1D or 2D codes in the automotive, packaging, electronics, medical device and pharmaceutical industries.

Modules include a model that provides two independent, isolated serial ports and one that provides four independent, isolated serial ports. Up to six modules can be located in the RX3i backplane. Each port can be configured for MODBUS Master, MODBUS Slave, or Serial I/O protocol.

Digiset 6 makes presetting boring and milling tools quick and easy with an intuitive control system and software. Digital camera imaging shows measuring results almost instantly on the on-board color display. Operators can manage up to 1,000 tools simultaneously and choose from programs that perform axial and radial runout inspection, cutting edge inspection, zero point monitoring and measurement of multi-bladed tools.

InVision Downtime Reduction System monitors fuses and circuit breakers. When a circuit opens, the maintenance staff is automatically notified by phone, e-mail or fax of the circuit's exact location, the correct replacement fuse to bring, and the appropriate level of personal protective equipment (PPE).