Industry Products

Chainflex CF.INI cables with over-molded connectors have a sensor/actuator cord set for process automation applications. Chainflex cables are designed for use in cable carrier systems on automated machinery. The outer jacket of every Chainflex cable is extruded over the conductors for a snug fit.

The M12 Ethernet D-coded connector is available as overmolded cordsets, field wireable and panel feed-through connectors. The preassembled cables enable users to plug and play, providing time, labor and cost savings. The M12 Ethernet connection system is IP67 rated for harsh environments and meets

Customers will now have a molded cable choice with M12 male or female, straight or 90 degree angle connectors, with or without LED indication in 3, 4, 5, or 8 poles. The cable material can be PVC, Shielded or PUR and they are also available in Y assemblies where one connector can be wired with two cables leading to two separate connectors. The Y assemblies are an ideal method to expand the ports on hard wired distribution boxes.

The new Datalogic Jet™ Version 5 is ideal for applications such as field force automation, retail in-store and warehousing, and enables companies to optimize the management of activities in all areas of a company's supply chain.

The 3300 Series is now available for temperatures up to 750°F (400°C) and pressures up to 5000 psig (345 bar). Common applications with these extreme environments include refinery distillation columns, liquefied gases and freons, power plant utility heater vessels, gas-oil production separators, oil water separators and compressor tanks.

APS is a quiet, reliable, low maintenance brushless system that consists of a permanent magnet AC motor with integrated speed reducer and an AC drive with I/O interface. It features a CANOpen interface for seamless integration and communication, and covers a wide variety of vehicle applications including Class 1, 2 and 3 lift trucks.

Spanning Tree (STP) and Rapid Spanning Tree (RSTP) are used as network redundant protocols in the Lynx-, R200- and T200-series of industrial Ethernet switches. This will allow the switches to improve interoperability while keeping a high network redundancy reliability.

PCI-1671UP is a cost-effective, universal PCI, GPIB controller in MD1 low-profile form factor which allows for data transfer rates of up to 1.5 MB/s. Features include: Full IEEE 488.2 compatibility, talker/listener controller, 1024-word FIFO buffer, HS488 compatible for up to 7.7 MB/s data transfer to/from instruments that support the high speed protocol, shared interrupt capability and transparent interrupt enabling /disabling.

UniSim Design Suite allows manufacturers to design, test and train employees on new processes offline before they are implemented. The new release includes enhancements that improve the design and optimization of heat exchanger networks, enhanced features supporting electrolyte processes, and the ability to predict corrosion.

The Rosemount 1595 Conditioning Orifice Plate is for use in high pressure applications to ANSI 2500 and DIN PN100 and process applications requiring material compatibility such has hastelloy, monel and 304L SS. The plate enables users to extend the use of orifice plates into measurement points previously limited by existing piping configurations.

The TopView Remote Viewer has been ported to the Windows Mobile platform. Users can remotely monitor tags and alarms, view alarm history, and perform acknowledgement from any Windows Mobile Device including PDAs and Smart Phones. With built-in WI-FI support and extended data networks provided through most cellular carriers, users can now monitor and acknowledge alarms from anywhere wireless or cellular service is available.

Light Duty Floor Stands are ideal for mounting safety light curtains and Perimeter Access Guarding Device. The stands are available in sizes ranging from 40 to 56 in. Mounting brackets and concrete mounting bolts are included, and no additional accessories are required for mounting. Heavy Duty Floor Stands are also available.

Phoenix Contact’s new explosion-proof antenna fitting requires no seal fitting and can easily be installed in a hazardous area. The RAD-CON-MCX-RPSMA-EX limits the amount of energy to the antenna, thereby eliminating the possibility of an explosion. The fitting can be used directly with any UL or CSA listed explosion-proof housing or fitting without need of a seal fitting.

Version 8.4 of DeltaV system software allows standard HART device status information to be used to generate PlantWeb alerts for any HART device permitting predictive diagnostics. Conditional alarming has been extended to FOUNDATION fieldbus devices to make intelligent field devices more discriminating to reduce nuisance alarms.

The MIC-3316 3U CompactPCI controller, a fanless alternative low power solution, has an ultra low power on-board Celeron processor at 650 MHz which can deliver efficient power consumption with less heat dissipation and longer MTBF (Mean Time Before Failure). No cooling fan is required, which improves system reliability and also reduces power consumption for special thermal requirements.

Model 2200-396-026 heated fluid-control valve is designed for precision control of low- to high-viscosity materials. It is used in a wide variety of applications for the transfer, delivery and dispensing of heated adhesives, sealants and lubricants.

Using clean and hygienic visualization devices is extremely important in all areas of the bottling, food, and luxury article industries as well as for pharmaceutical packaging machines. For these types of applications, B&R offers a universal and scalable product line for PC-based displays with touch screens and/or keyboards, operator panels with simple text displays, or thin clients for remote visualization via Ethernet.

The NCV Insulation Displacement Connection to Screw Clamp Terminal Blocks offers a traditional screw-clamp connection on one side of the block and the IDC on the other. At the same size of a regular terminal block, it is 50% smaller than competitive blocks, allowing an OEM) to save up to 70% in labor time by utilizing the IDC connection in the factory while providing the convenience of a screw clamp connection for the end user in the field.

PlantTriage Performance Supervision Software now includes a simple, text message diagnosis for every loop in the plant. The diagnosis is immediately available to any technician or plant engineer via their web browser. Each diagnosis is an actionable item providing fast resolution of problems. The simple message diagnostic for each loop tells exactly where to focus, whether it is a sensor, controller, or valve-related issue.

The 22.5mm wide, DIN-rail mountable modules can be used for monitoring currents and voltages in numerous applications. The current monitoring relays are designed for monitoring AC and DC currents ranging from 0 to 100mA, 0 to 1A and 0 to10A. The voltage monitoring relays are available for monitoring single phase AC and DC voltages ranging from 0 to 30V, 0 to 60V and 0 to 500V.

Yokogawa has gained ”Powered by SAP NetWeaver” qualification for the Yokogawa portfolio of MES and Operational Excellence solutions.

In order to minimize errors, and ensure that the right goods are delivered in a timely manner to customers, accurate communication is required between Warehouse Management Systems (WMS) and automated equipment. Bridging this gap is PSI Engineering, a leader in material handling and in-line document automation solutions. PSI’s new warehouse control software: FICS Suite ensures quick and accurate deliveries and maximum customer satisfaction.

The AEP-1000R Series is available in three standard input configurations of 12VDC, 24VDC and the less frequently found 48VDC. Outputs are available in 115 or 230VAC (50/60Hz) versions, which are regulated to +/-3% or better. A built-in, 4-6ms automatic bypass switch allows for redundant operation from utility power if the DC supply drops out.

Lead-free Cincon EC7C Series of 40W DC/DC converters are fully compliant to the RoHS Directive. An ultra wide 2:1 input allows operation in a variety of mobile, battery powered or DC Power System applications. Units deliver tightly regulated, adjustable single outputs in a compact, industry standard 2” x 2” x 0.4” six-sided shielded metal package.

Honeywell Sensing and Control business (S&C) is enabling its portfolio of sensors for integration into wireless sensor networks by incorporating Crossbow’s wireless sensor networks platform into its XBW product line.

DEACOM document management system resolves document management challenges by allowing any electronic files, such as JPG, Word, or Excel files, to be attached to any sales order, item master, customer, vendor, PO, or accounting transaction file. Examples of file attachments include digital pictures of shipments, scanned delivery signatures, item, formula, or engineering information, transactional worksheets, and electronic confirmations.

SMD Polymeric Antenna for short-range, wireless Ultra-Wideband (UWB) applications combines compact size with high performance. ODMs and OEMS deploying UWB can benefit from flexibility of antenna shape design without compromising on size or performance.

MC73110 Motor Control IC with field oriented control (FOC) for brushless DC motors increases motor efficiency, delivers a wide range of usable motor speeds along with numerous monitoring and control features. Only a MOSFET or IGBT three-phase bridge is needed to implement a full-featured drive. The MC73110 is ideal for use in applications such as medical automation, semiconductor equipment, general automation, and scientific instrumentation.

The PSE10 is a fully programmable electronic pressure switch featuring solid state sensing, programming and switching. Because it has no moving parts, this switch has an extremely long life. With an IP67 protection class, the PSE is perfect for use with foreign materials and anywhere high humidity is an environmental issue.

SHB100 PICMG 1.3 single board computer supports Intel Pentium D, Pentium 4 and Celeron D processors, and has a 533/800/1066MHz front side bus (FSB) speed and the express chipset, the Intel® 945G+ICH7R. Its power placement complies with a wide range of multi-function applications.

The AR-M9936 supports Pentium M / Celeron M processors ranging from 600 MHz to 2.0 GHz, DDR 200 / 266 memory up to 2 GB, and optional Gigabit Ethernet, PCI and MiniPCI expansions. Server functions include Bypass LAN, PXE, Auto-MDIX, and Console Redirection.

FO repeaters OZD 485 G12 BAS and OZD 485 G12 PRO are designed for use in field bus systems based on the RS485 standard. Versions are available for linear, star-shaped and ring topologies. Due to the optical transmission technique and special redundancy mechanisms, the repeaters are especially suitable for secure data communication in areas with difficult electromagnetic conditions.

Profibus FO repeater OZD Profi G12 ATEX 1 has a transfer rate of up to 12 Mbit/s and supports the HIPER-Ring redundancy technique. The optical power can also be monitored continuously by signal strength outputs which can be integrated in the process control system. Fast and highly available Profibus networks can therefore be extended easily to explosion protection zone 1.

EASY-MARK labeling software saves time and money in creating labels for wire/cable, network components and safety identification. Features include WYSIWYG user interface, data import, symbol import and pre-loaded label formats. Instructions and user interface are available in English, French, German, Italian and Spanish.

SITRANS FC300 DN4 Coriolis flowmeters are half the size of comparable devices, has a maximum capacity of 350 kilograms/hour (772 pounds/hour), and measurrd 5.3 x 8.1 x 2.3 in. Durable design makes the sensor virtually impervious to process generated noise such as vibrations, pulsations and pressure shocks.

Electro-Sensors, Inc. has introduced the first-of-its-kind SpeedTalker DN (UI), the latest addition to its range of DeviceNet shaft speed sensors and tachometers. The SpeedTalker DN (UI) is a network powered DeviceNet tachometer designed to convert pulse frequencies from a wide range of sensors into RPM units. It provides measured shaft RPM from up to 2 input channels along with the status of up to 8 independent under/over speed threshold alarms over a DeviceNet network.

MS-Q Quadrus hand held imager now has disabled image capture and downloading. Permanent removal of its photographic functions will allow use of this manufacturing tool within sensitive industrial areas where photographic devices are prohibited. With this function absent, the secured imager can be used within restricted areas of manufacturing facilities to read challenging direct part marked bar codes and symbols.

The PSI-WL series is an interoperable set of license-free Bluetooth standard radios. Class I, Div 2 approved and easy to use, these high-speed radios offer connectivity to any Bluetooth-enabled device such as PDAs, PCs, or other PSI-WL devices. One model is a DIN-rail mount package that interfaces to RS-232/422/485 electrical formats. Modbus and additional industrial protocols are also supported.

M4000 Advanced offers safeguarding solutions for point of entry applications for access protection to conveyer systems, palletizing equipment, robotic work cells, and many other machine applications. Using corner mirrors enables the M4000 to protect up to 4-sided applications, such as for an entire robot cell (360-degree protection).

Copeland Scroll modular compression technology for gas compression is especially suited to help producers optimize and restore production from mature oil and gas fields. Its compact footprint, light weight, modular design and flexibility lend itself for the design and operating constraints of offshore platforms and FPSOs.

U.C.ME Alarm Notification Software is compliant with FDA's 21 CFR part 11. The software lets users acknowledge alarms, query or change tag values via SMS or phone. It provides electronic records of every operator action (change in alarm configuration) electronically signed with explanatory text and securely logged to a database.

QUINT single phase, 40 amp, 24 volt DC power supplies effectively double the maximum current output available in single phase, industrial grade DC power supply technology. The power supplies have a wide operating temperature range of –25 to +70 °C. They offer adjustable output voltage between 22.5 and 29.5 V DC.

The PMT-10 is an Ethernet-enabled HMI terminal with infrared touch screen. The PMT-10 includes a 10” high contrast Sharp color LCD with a wide-viewing angle; 10/100Base-T Ethernet; two serial ports (EIA-232 or -422); and speaker and real-time clock. The rugged terminal features a solid aluminum enclosure that has passed Mil Spec 901D, 167, 461E. The unit is currently being used by the U.S. Navy because it has been certified for hard-deck applications.

DGS65 blind hollow shaft incremental encoders feature a rugged IP65/66-rated housing with collets for shaft diameters of 6, 8, 10 and 12 mm. They provide up to 10,000 pulses per revolution for precise, reliable operation in the toughest of environmental conditions. They are available with a connector or cable outlet, and TTL or HTL electrical interfaces.

The AS1xxx stepper motors provide a cost-effective alternative to servo motors in the small and medium capacity ranges. Different stepper motor types in this series have nominal current ratings from 1.0 A to 5.0 A and torques ranging between 0.38 Nm and 5 Nm. The AS1xxx series can be used as actuators or auxiliary axes for numerous machine designs and automation applications.

The all-copper models of EDS-316 come with 16 10/100BaseT(X) ports, and the fiber models are equipped with 14 10/100BaseT(X) ports. The EDS-316 series includes twenty different models. Several models include a built-in relay warning function that alerts maintainers during power failures or when ports get disconnected. The temperature range (-40 to 75°C) and DIN-Rail mounting capability make the switch suitable for industrial Ethernet applications.

M Series data acquisition (DAQ) devices for the USB bus offer up to 32 analog input channels, data acquisition rates of up to 1.25 MS/s, and high-speed signal streaming technology. The NI USB-6251 and USB-6259 DAQ devices offer a 5 times overall performance increase compared to previous devices

The new line of Airborne 802.11 embedded wireless modules and AirborneDirect 802.11 external wireless networking products for OEM machine-to-machine (M2M) applications meet 802.11g standards, have advanced security features and extended environmental specifications, and are fully compliant with RoHS standards.

2006 Sensor Products catalog features detailed information on the company’s extensive offering of products for sensing applications. The 500-plus page catalog is printed entirely in color and showcases thousands of products including vision sensors, photoelectric and ultrasonic sensors, specialty and measurement and inspection sensors.

Universal Robot Controller 3 is ideal for robotic applications that require high-speed, simple setup and straight-forward programming. It has a Teach Pendant, a 10.4-inch LCD touch-screen monitor, that can function as a stand-alone monitor when working offline or while the robot is operating.