Industry Products

The dark web is a place where illegal and illicit activities occur; traditional businesses and email users are constantly warned about the dangers of their information being breached and ending up on the dark web.

The M16-X has a rated voltage of 50 V AC/60 V DC and is available with an optional female panel mount connector.

Designed specifically to meet the demands of applications in hazardous atmospheres, each sensor works on such a low current and voltage that it cannot ignite flammable material present in explosive zones

The cMT X Series features all the features the cMT Series does, such as cMT Viewer, EasyAccess 2.0 built-in VPN with pass-through, IIoT capabilities with MQTT and OPC UA protocols, and over 320 communication protocols. Peripheral connectivity remains in the cMT X Series with dual ethernet ports, RS232, RS485 2-wire/4-wire, CAN Bus communication ports, USB host port, and built-in mono-speaker.

The Picavi Cockpit tool generates smart data for managing, maintaining, and customizing the screen of the Pick-by-Vision glasses: analytics, mobile device management (MDM) and configurator.

Its dimensions are 3.6(L) x 2.1(W) x 3.5(H) inches and the series is available with Intel Celeron J3355, Pentium J4205, or Atom E3940 SoC processor options.

The AX / KX solution is designed for maximum space availability. The AX, now with larger gland plates, creates more space for cables. In addition, integrated locators enable incorporation of the interior installation rails. These rails also support dynamic loads seen in many industrial environments

ForwardX robots depend on V-SLAM with Deep Learning techniques for positioning and navigation. They will be on display at booth 1207 at MODEX 2020

Also known as an electric cylinder, this direct drive linear motor is 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long. Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft.

AutomationDirect CLICK PLC units are brick/stackable PLCs with the processing, memory, communication and I/O interface needed in an automated control system.

Through a catalytic combustion process, the Fugitive Emission Eliminator oxidizes the vented sample, converting hydrocarbons to CO2 and water vapor, while maintaining a stable outlet vent pressure to the atmosphere.

Threaded Line Vac Conveyors eject a small amount of compressed air to produce a vacuum on one end with high output flows on the other. Response is instantaneous and regulating the compressed air pressure provides infinite control of the conveying rate. Applications include scrap trim removal, material conveying, part transfer, fiber tensioning and filling operations.

The Prosonic Flow G can be supplied with either of two different transmitters: as a compact version (Proline 300), or as a remote version (Proline 500) with up to four inputs and outputs.

Softing's uaToolkit Embedded has been certified in the Compliance Lab of the OPC Foundation for the Nano Embedded Device Server profile, the Micro Embedded Device Server profile and the Embedded UA Server profile.

ADISRA SmartView allows users to develop effective interfaces displaying the critical information they need to deploy, monitor, and analyze a machine’s operation and overall status.

The offers – Standard, Professional and Premium – feature SOLIDWORKS standard, professional and premium applications that are installed from, licensed from, and updated in the 3DEXPERIENCE platform, with data stored in it.

Allen-Bradley 855X Hazardous Location Signaling Devices are designed to help industrial operators meet the latest global hazardous-location ratings and certifications. The signaling devices include horns, beacons and combination horn-and-beacon units.

The 250V STSPIN32F0251 and STSPIN32F0252, and 600V STSPIN32F0601 and STSPIN32F0602 combine three-phase gate drivers and an STM32F0 Arm Cortex-M0 microcontroller for high-voltage Brushless DC (BLDC) motor drives.

The measuring concept of the Promag W (0 x DN) features multiple measuring electrodes to detect flow. These electrodes generate a higher density of measured data than standard devices. Together with the refined signal analysis, measurement results are realized in swirl conditions.

The PICO-WHU4 features the 8th Generation Intel Core i3/i5/i7 and Celeron processors (formerly Whiskey Lake) combined with support for up to 16 GB of DDR4 RAM.

The FM drives are equipped with an additional interface board with standard connectors.

The L6983C enters pulse-skipping mode when the load current is below 0.6A while the L6983N, suitable for noise-sensitive applications, stays in PWM (pulse-width modulation) mode at all loads to minimize electromagnetic disturbances.

With the integration of 2DMI with the Leuze DCR 200i range of camera-based code readers, customers are now able to capture transaction and authentication information automatically anywhere in the supply chain.

The device is suitable for use with both brushed DC and brushless EC motors (BLDC) of up to 120 W and has comprehensive feedback options such as Hall sensors, as well as digital incremental and SSI absolute encoders.

The FS-3200T-10GE-NNC model features Bayer and monochrome versions of the Sony Pregius IMX252 CMOS sensor offering 3.2-megapixel resolution (2048 x 1536 pixels) and a 1/1.8” optical format.

AVEVA’s digital tools enable access to production information, KPIs and notifications on dashboards, workstations and mobile devices to improve overall equipment and labor effectiveness, and to facilitate data-driven improvement.

The Type 7150 combines the technology of the ControlAir Type 200 Precision Air Relay with the high forward and reverse flow of the Type 6100, 1:1 Relay Volume Booster.

These Yaw-Pitch-Roll stages are designed for the measurement of compound angles or the curvature of an object.

Using a corresponding master, the level controllers can be connected to any common bus system and conveniently parameterized via PC or notebook. The guided microwave measuring principle ensures reliability due to its insensitivity to external influences such as temperature, pressure, or density.

The single-direction AGV was developed for a specific application with detailed requirements to support the user’s “around the clock” operation. Creform developed four AGVs for this specific job recipe to act as transfer vehicles between conveyors at multiple points in the manufacturing process.

ÖLFLEX VFD 1XL cables feature XLPE (Plus) insulation which results in a reduced cable outer diameter (OD) making it possible to install more cables into cable trays/cable carrier systems, or to downsize protective cable conduit systems.

The SDx Connector for OSIsoft serves as a bridge between the two technologies, interfacing historical and real-time data from the PI System into Hexagon’s models to provide plant managers, executives and engineers greater visibility.

The provisioning services enable IoT devices containing the eSIMs to connect automatically to cellular networks. Each of ST’s appointed partner/operators can access hundreds of cellular networks of all types including 2G, 3G, 4G, LTE CAT-M (low-power wide-area connectivity), and NB-IoT (narrowband IoT), in large numbers of territories worldwide.

Advantech’s UNO-247 is a platform that ensures installation with applicability and integration potential. To reduce system downtime and ensure maintenance, the platform’s mechanical design has been improved to enable memory installation/swapping without disassembling the entire chassis.

Each module operates as a standalone Modbus TCP server, and can be remotely configured via a built-in web server.

This virtual reality-based (VR) solution gives personnel simulated hands-on experience to prepare for any plant event, helping them make better decisions regarding operating changes and practice proper procedures before entering potentially hazardous plant areas.

These applications work to empower engineers and scientists in process manufacturing organizations to analyze, predict, collaborate, and share insights.

The PV3 is designed as a solution for companies needing large roll capacity, battery life, connectivity and built-in dispenser functionality.

The first shipping version of groov RIO is the GRV-R7-MM1001-10, a standalone, 10-channel, multi-signal, multifunction I/O unit for signals including thermocouples (TCs), integrated circuit temperature devices (ICTDs), voltage inputs, current inputs, millivolt inputs, discrete DC inputs, self-wetting discrete inputs, discrete DC sinking outputs, and Form C mechanical relays

With Proficy Operations Hub 1.5 from GE Digital, users can make decisions based on real-time and historical plant-wide application data collected from tools across an organization’s portfolio of data historians and manufacturing execution systems (MES), independent of location.

The size of these Wenglor sensors makes them suitable as drop-in replacements for other rectangular photoelectric sensor brands. Sensing ranges vary from 1200mm for background suppression sensors to 20m for through-beam models.

HM White’s Energy Audits leverage over a decade of experience gained from energy conservation projects at multiple industrial plants nationwide.

The OSA +Flow family embeds Flow-Cal measurement applications into the Bedrock Automation platform. Flow-Cal’s software is a choice for flow measurement and production-accounting data.

iRISK is designed to provide vulnerability assessment reporting for OT networks, including risk prioritizations and mitigation recommendations.

The software leads users through the redlining process with which they can view and comment on changes to the project. This helps facilitate communication and collaboration across projects, across disciplines and across companies.

The smart distribution center solutions will include the North American debuts of the EP7402 controller for motor-driven roller (MDR) conveyors, TwinCAT/BSD alternative operating system (OS) for Beckhoff PC-based controllers and C6025 ultra-compact Industrial PC (IPC). The eXtended Transport System (XTS) will also make its MODEX debut at the Beckhoff booth (4026).

The services support the full spectrum of ICS/OT/IoT maturity, from early-stage IoT adoption, health checks and strategy validation, to full-lifecycle risk management.

The valve offers a close-off pressure of 75 psi (5.2 Bar) ensures a safe shutoff in the event of a fuel train system failure and eliminates the need for additional safety components

The X-410 offers the ability to log a variety of data points such as local and remote I/O, registers, tasks, and voltage. Log entries can be made at preset intervals, scheduled times, triggered by I/O changes or logic events. Users can schedule a daily log file to be sent via email or uploaded via FTP server.

The four solutions relate to Ignition by Inductive Automation. Ignition is an industrial application platform with tools for building solutions in human-machine interface (HMI), supervisory control and data acquisition (SCADA), and the Industrial Internet of Things (IIoT). Ignition is used in many industries, in more than 100 countries.