Industry Products

The thicknessCONTROL MTS 820x and MTS 920x thickness measuring systems from Micro-Epsilon offer an application solution. Their technology enables measurements on both thick and thin materials.

The latest design showcased at ATX includes two safety mats and two area scanners that detect when people enter the work envelope, allowing the system to meet higher speeds when not in collaborative mode.

The AMCI NR60E2 networked encoders are 100% compatible with Allen-Bradley, Siemens, and Schneider PLCs that support EtherNet/IP, Modbus TCP/IP, or Profinet.

Developers can plug the CPU module into their motherboard and configure it with the PCAN-MicroMod FD Configuration Windows software included in the scope of supply.

The addition of a model with spectral sensitivity at 1.45-1.75 μm (2M) now allows measurements to be made from as low as 250° C. The models were also expanded upwards by calibration methods – a maximum of 3000 °C can now be measured.

The latest version of the Simplifier now allows for a fully automatic calculation of the smallest sphere diameter that surrounds a part or an assembly.

The GForge “Dark Night” includes features that are intended to make the collaboration software easier to use. Dark Night also adds power features, which together will work to make project collaboration more efficient.

The P1AM-100 CPU supports the full suite of Productivity1000 I/O expansion modules, including: discrete, analog, temperature, relay, high-speed input, pulse-width-modulation.

The vibrating fork, paddle, capacitance and vibrating rod switches within the Rosemount range ensure monitoring of solid materials such as powders, grains and pellets in all silo types across industries including food and beverage, agriculture, chemical, power, cement, mining and plastics.

The PowerLogic ION9000T meter builds on the latest generation of power quality meters and the he ION9000 and ION7650. It shares the core of the original meters, but also adds high-speed transient capture capabilities

The FDT/DTM encapsulates all device-specific data, functions and business logic rules such as the device structure, its communication capabilities, internal dependencies, and Human-Machine Interface (HMI) structure.

January 29, 2020 - Ransohoff a division of Cleaning Technologies Group, introduced a spray and ultrasonic combination aqueous parts cleaning system. The Rotosonic will work to clean heavily soiled parts in a single machine, rather than having to purchase a spray cabinet and an ultrasonic machine separately. It is designed to give flexibility allowing utilization of a single process or both, depending on user needs. The Rotosonic is a parts cleaning machine for re-manufacturing of automotive, truck, aerospace parts and more. The machine has a payload of 300LBS and a load height of 39”. The ultrasonic tank offers 40KHZ frequency to help clean the hard to reach locations and blind holes. The Rotosonic has a footprint of 55” deep x 50” wide x 86” high.

SoliTherm Progressive Series is UL listed for types 12, 4, 3R and 4X and includes integrated condensate evaporation package for no-drip operation.

Measurement angle of the RSA3200 Series is factory programmable for range maximum between 60° to 360°. Optional linkage lever that attaches to shaft, provides additional mounting options.

The volume of cyber security threats within critical infrastructure environments is rising and continues to pose significant human safety and financial risk. Cisco is delivering security by converging the IT and OT within security operations centers to provide advanced anomaly detection with built-in threat intelligence.

Their two-part Density Systems are designed to provide measurement while withstanding the corrosive effects from caustics, acids, ammonia, sulfuric acid, hydrochloric acids and nitric acids.

V7.1 of the CM MES has an HTML5 GUI to provide a single end-to-end user-experience that is applicable to MES stakeholders across functional areas including production, quality, planning & logistics, maintenance and engineering.

January 28, 2020 - The combination of Softing's mobiLink interface, i.safe MOBILE's Android tablets and smartphones and ProComSol's DevComDroid App for mobile field devices has been tested as a solution for safe configuration and parameter setting of HART field devices also for hazardous areas. The bundle is available from i.safe MOBILE. i.safe MOBILE GmbH, based in Lauda-Koenigshofen, Germany, has more than 10 years of experience in the development of equipment for use in explosion hazardous areas. All i.safe MOBILE products are certified for safe use in hazardous areas (ATEX, IECEx, CSA, EAC, etc.) and are suitable for use in industry and outdoors. ProComSol Ltd, based in Lakewood OH, USA, is a developer and manufacturer of HART communication products for the process industry.

Based on the NVIDIA Quadro Pascal (GP107) P2000 GPU architecture and providing up to 2.3 TeraFLOPS of performance, target applications for the board include those that require high-end graphics capabilities or CUDA support when performing general purpose processing, and that require raw video capture and display.

The PSC-52LT operates in the 0° to 1000°C (32° to 1832°F) temperature range with adjustable sub-temperature ranges. It features an adjustable response time of 100ms, and is capable of measuring spot sizes from 0.24” (6mm).

RXi industrial displays are designed to work with both Emerson’s programmable logic control (PLC), programmable automation control (PAC) solutions and third-party control systems.

Commander uses a BASIC-like programming language (A-SCRIPT) that allows programmers to compile, read and write standalone programs. The software also provides multi-threading and subroutine support, and can be run in both PC-based and standalone modes.

The joysticks comply with the special cleaning requirements of the food industry to prevent cross-contamination, particularly when used in machines that process raw goods.

These large capacity models are available with 500, 750, and 1,000 kNm torque ranges. Available outputs include analog, digital and FM Data.

The FL500-H2 sensors monitor optical radiation emitted by a hydrogen flame in both the ultraviolet (UV) and infrared (IR) spectral ranges while at the same time rejecting false alarm sources common within industrial job sites.

The MLSR192K-16A operates from an 8.3 to 14 VDC input, producing a single tightly regulated output at up to 16A. The output can be adjusted over a range of 0.7525V to 5.0V.

The Liquiphant FTL51B can be used in storage tanks, containers, and pipes for point level detection of all types of liquids. The instrument’s vibronic sensor is not affected by changing media properties, flow, turbulence, gas bubbles, foam, vibration, or build-up.

Part of the PowerPac portfolio of RobotStudio, the 3D Printing feature eliminates manual programming to allow prototype production. The 3D Printing PowerPac supports a variety of processes, such as welding and printing with granules or concrete and is ideal for low-volume, high-mix printing.

These devices have been certified in compliance with IECEx and ATEX directives and are suitable for use in mines, oil and gas facilities, agricultural applications, chemical plants, woodworking factories and milling operations.

The circuit breakers, also known as motor-protective switching devices, can be mounted on Allen-Bradley 100-C or 100-K contactors to create a two-component motor starter. The devices provide magnetic short-circuit protection and thermal-overload protection up to 32 A, and interrupting ratings up to 100 kA at 400 V.

At 2 inches wide and 3 inches high (40 sq. cm), the HI 6200 series are designed for machine level integration in process skids or manufacturing equipment. A color TFT display provides operations and measurements and instrument status.

The enclosures provide IP65 degree of protection when coupled and locked through the locking levers so they can be installed both indoor and outdoor regardless of weather conditions. The range of operating ambient temperature is -40°C ~ +125 °C.

The MPLAB XC functional compilers certified by TÜV SÜD aid in satisfying the verification and validation requirements specified in the ISO 26262 standard for automotive safety, IEC 61508 for industrial applications, IEC 62304 for medical software and IEC60730 for automatic electric controls.

Existing display options include analog process signals, load cell, or potentiometer inputs, and temperature inputs in either °F or °C from RTDs or thermocouples. All panels offer selectable decimal point location.

The FWM7RAZ01 supports IF (I/Q) output signals from 1Hz to 1 MHz enabling it to detect movement speeds from 6mm-per-second to 6km-per-second, within a 30-meter range.

Deploy ensures all manufacturing activities remain accurate with the most up to date software versions installed on systems throughout smart facilities.

Based on photoelectric Micromote technology, it features an LED sensor in a sensor head measuring 2.4 x 1.5 x 7 mm. Especially designed for use with thin end effectors, it features a controlled and focused light spot, allowing it to detect wafers a few μm thick.

The CD Series is designed for applications in machines, status indication, automation, controls, and aircraft instruments.

Equipped with three signal options, eight different operating modes, and a signaling area of up to 1350 feet, the PMF LED-Hi offers day/night reduction, individually switchable sectors and inrush current limitation.

More than a searchable database of over 10,000 WAGO products, Version 4.0 offers added features including expanded functionality of the "Smart Designer" for custom rail assemblies. This advanced design tool saves design time by calculating the rail length, identifying errors in the design and automatically correcting them. Completed drawings can be exported to any CAD programs or into a data file. The software also provides customers with a bill of materials according to the drawings, and in numerical order, making purchasing easier.

Free Guide Features Incremental and Absolute Encoders

The FGS Stand Alone is a single FGS unit setup to guard an area that can't be entered from another direction. The device must be mounted so that the user can not reach over, reach under or stand behind the defensive fields.

Automationdirect now offers their own Centsable brand of contactors in IEC sizes Sizes A through F with a manual starter / protector now available to make a motor starter.

Request AutomationDirect's FREE DirectSOFT32 and C-more Demo CD. It will give you the chance to try their software to see if it will fit your PLC or operator interface applications.

ImageVision Modular Consoles are all steel and built for the industrial environment. They can be gasketed to provide protection against grit and dirt. Optional sub-panels and custom cut-outs allow you the flexibility to install devices in either the 1st or 2nd tier. We customize to fit your application!

A new standard for useable information and technical completeness, while providing significant new data and conclusions on one of the “workhorses” of flow measurement. If you manufacture, sell, specify, or use full-bore magnetic flowmeters, this study is a “must have” for you.

DVT's Series 500 SmartImage sensor is a stand-alone imaging sensor with on-board image acquisition, processing, digital I/O, and serial and Ethernet communications. All this is contained within a small 1.6" x 2.2" x 4" footprint.

Grace Engineered Products has certified its products to comply with the CE safety specification...