Industry Products

Designing control systems just got easier. With new PANELdraw™ software from Hoffman®, you can create panel and enclosure layout drawings, quickly and precisely. This AutoCAD® add-on tool has an easy-to-use process for Bill of Material generation, documentation reporting, panel selection and drawing.

Grace Engineered Products has introduced an interface for the Allen-Bradley MicroLogix 1200 processor.

Grace Engineered Products announces two new Convenience interfaces for Allen-Bradley ControlNet (AB 1203-CN1) and Enhanced DeviceNet (AB 1203-GU6)

The brushless voice coil motors provide 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force.

AutomationDirect's GS AC drives were designed with simplicity and robustness in mind. We worked hard to make these drives the easiest to use in the industry. The GS series was specifically designed to be able to handle the higher range of American voltages.

Cut your PLC wiring time down to minutes instead of hours! The ZIPLink system eliminates the normally tedious process of wiring PLC I/O to terminal blocks. Simply plug one end of a ZIPLink cable into a DirectLOGIC I/O module and the other end into a ZIPLink connector module. It’s that easy! ZIPLinks use half the space, at a fraction of the total cost of terminal blocks.

Designing a pushbutton that will satisfy NEMA requirements while maintaining the value you've come to expect from AutomationDirect is not an easy task. We took advantage of the experience of Cutler-Hammer engineering to take existing product technology and make it better. We proudly carry the HT800 line of 30 mm pilot devices from Cutler-Hammer.

The DirectLOGIC 06 (DL06) programmable logic controller (PLC) is our first micro PLC to combine its fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. With the DL06 micro PLC, you can use the same PLC panel layout for all applications from 36 to 100 I/O.

The WinPLC is a revolutionary product that brings the best of the PC controls and the PLC world to a common platform.

The DL105 series is a fixed-I/O micro PLC with 10 inputs and eight outputs. Eight configurations are available in combinations of AC, DC, and relay I/O, as well as AC and DC power supplies.

The DL05 and the DL06 product lines are a family of micro PLCs designed to fit more applications than any other PLC family in their class. Starting with the DL05 at 8 inputs/ 6 outputs, all the way up to the fully expanded 100 I/O DL06 PLC, these PLCs are a standard that can grow with the changing needs of your machine or process control applications.

AutomationDirect offers a full line of operator consoles and consolets designed to house electrical and electronic controls, instruments, push-buttons, pilot light and operator interface systems.

If your application requires the flexibility of a modular control system, a DL205 PLC is the lowest cost, most versatile solution you'll find. In fact, all you need to do is pick out a CPU, plug it in the first slot of the base you choose, and then mix and match various modules into the available slots.

AutomationDirect's Terminator I/O line of field bus termination I/O products, a practical solution for remote I/O, PC-based control and distributed control applications.

DINnectors are simply DIN rail-mounted connectors or terminal blocks. They provide a means of connecting and identifying two or more wires within the demands of an industrial environment. DINnectors can terminate solid or stranded wires ranging from 18-3/0 AWG, and offer fusing, grounding or disconnecting capability within the terminal block itself.

This product line has the widest variety of I/O modules and configurations of all our PLCs. You can build a control system with local/distributed I/O of up to 3,500 points. Use the built-in PID instruction or specialty modules to perform cost-effective process control. Three CPUs from 6.5 K memory with 1,152 I/O to 30.8 K memory with 3,584 possible I/O, with built-in power supply are offered.

Would you like to get real-time PLC information directly into Excel™, Lotus™, Visual Basic™ and many other Windows® application programs that you use every day...faster than you ever imagined?

LookoutDirect is a PC-based Human Machine Interface (HMI) software package. It comes from National Instruments(based on their Lookout® object-based automation software). LookoutDirect does everything you need an HMI to do, at half the price charged by most of our competitors.

AutomationDirect offers electromechanical motor control solutions for motors up to 40 horsepower at 480 volts.

AutomationDirect carries Cutler-Hammer E26 Series Stacklights which come in preassembled 2 or 3-light units, or put together a stack of your own with five colors and alarm and strobe modules.

AutomationDirect offer hundreds of different NEMA cabinet enclosures, including junction boxes, wiring troughs, wall mount and free standing...all at AutomationDirect's low prices!

Grace Engineered Products announces the GracePort™ “M5 Series” line of Stainless Steel Interfaces specifically suited for the Drug, Food Processing, Dairy, Chemical and Petro-Chemical Industry.

The MS-880 is the ideal scanner for facilities looking to simplify equipment purchase by selecting one scanner model throughout the floor for a variety of uses.

Quadrus EZ™ simplifies 2D reading. Fully featured to read linear bar codes or 2D symbologies in static or dynamic applications, it is ideal for any company considering the transition from bar codes to 2D symbols.

Designed for embedded applications, the MS-3 series meets demanding space and budget requirements while offering an exceptional feature-set. The MS-3 series are the fastest, smallest bar code scanners available.

Improve product and data tracking within a single manufacturing line or throughout and entire supply chain. Omron’s advance Auto Identification solutions offer the durability and advanced function you need.

All sizes of NITRA rodless cylinders have magnetic pistons and are double-acting. The cylinders have front and rear adjustable cushions and tapped end caps for mounting.

The integrated tool “surface OCR” recognizes and extracts character strings from surfaces. For that it uses either the scan data of the 3D-height map or the 2D intensity data.

The KX-2 collaborative robot is designed to meet a need in the market for capable robotics accessible to laboratories of all sizes. The KX-2 robot provides automation, combining reach and 360-degree rotation on the shoulder and wrist axes with radial compactness.

The P2102 is a fanless, embedded computer with the P2102E. Supporting Cincoze’s modular design, the P2100 Series can also work as a panel PC when combined with various Cincoze display modules.

Electra Cloud allows users to collaborate on their drawings with team members located anywhere in the world in real-time, with a browser and no additional software required.

The EC-7100 platform combines the computing power of the NVIDIA’s MXM GPU hardware accelerator and the 7th Generation Intel Core processor family to leverage streaming data for artificial intelligence-driven applications in the transportation, automation and retail industries.

WEG SSW05 and SSW07 soft starters are fully digital soft starters with DSP (Digital Signal Processor) controller designed for motor starts and stops. The Gen 2 WEG CFW100 VFD drive is a single-phase input (110/230 VAC), three-phase output variable frequency drive developed for applications ranging from 1/4 to 1hp (0.18 to 0.75 kW).

The linear axis uses a H2W brushless linear motor BLDM-C08 to generate a continuous force of 26 lb [115.5 N] and a peak force of 78 lb [347 N] with a stroke length of 30 in [768 mm].

The PROGENY system provides plasma treatment at 13.56 MHz and accommodates all the common gases, like oxygen, nitrogen, and argon, with high process reproducibility and uniformity.

The VFD-SC series is the same cable as the standard VFD-C series; the addition of the shielded 16AWG signal pair allows the cable to be used with motors and drives requiring brake control or feedback from devices like temperature or position sensors.

EXAIR’s Gen4 Two Outlet Selectable Voltage Power Supply allows users to choose input voltages of 115VAC or 230VAC. Two 5kV stainless steel output connectors can energize two static eliminators.

The SPECTROMAXx is an OES line with more than 13,000 installations. The newest generation instrument features a more intelligent elemental analysis of incoming source materials, for in-process testing and traceability, and for final quality inspection.

The Plantweb Insight Inline Corrosion application delivers field data from Roxar wireless corrosion transmitters, providing insight into instrument health and process corrosivity.

The Eclipse is suitable for critical applications for liquid and gas delivery, medical, analytical and industrial automation requiring fine resolution and repeatability. In addition, the design allows for custom flow profiles.

These DC-powered (10-30V or 15-30V) threaded-barrel sensors are IP67 rated and are available with 2m pigtail cable or quick-disconnect.

FX-3420 can support up to 768GB of memory, through multiple DDR4 2,666 MHz REG DIMM modules and comes with 12x SATA 3.5” hot-swappable disk drive bays.

The pitch stage has cross roller guides and a range of travel of +/- 10 degrees. The maximum speed is 14 degrees per second with stepper motor driven version and 90 degrees per second with the servo motor driven versions. The 65 mm x 65 mm table has a pattern of threaded holes for fixtures or tooling and has an accuracy of 0.05degrees and repeatability of +/- 0.01degrees.