Industry Products

The junction boxes join two fiber optic cables and environmentally protect the connection in harsh environments.

The MagniStar line includes six C-mount bi-telecentric lenses with built-in adjustable iris for vision measurement and inspection applications that require extreme precision.

HarshIO modules provide industrial fieldbus connectivity for attaching sensing devices, actuators or any single digital signal device to Ethernet or Profinet.

This heavy-duty, 600 volts alternating current /250 volts direct current safety switch utilizes finger-safe components to achieve protection for personnel and equipment.

TCP COM Bridge is a utility program that works as an RS232-TCP/IP software converter and allows to forward data from a physical or virtual COM port to an Ethernet network.

W5500 TCP/IP Ethernet controller provides easy Internet connection to embedded systems by using a single chip in which the TCP/IP stack, 10/100 Ethernet MAC and PHY are embedded.

Updates include 4:1 input voltage ranges of 9 – 36 Vdc, and 18 - 72 Vdc and up to 96 Watts output in a DOSA standard 1/8th brick DC-DC converter.

IA-3352-U has step resolution of 3200 Steps per Revolution and Current rate of 2 Amperes per Phase, controlled by an Isolated USB port.

These pneumatic air cylinders have a 250 psi operating pressure and are interchangeable with other popular brands.

The AST5300 is suitable for various liquids and gases requiring high line pressure (1500PSI) and low differential pressure (10 PSID) measurements.

Maintenance Pad is an industrial tablet computer with Metso Machine Analyzer software that includes route planning, route and off-route measurements as well as efficient tools for vibration analysis.

These dual contact blocks only extend 59.9mm behind the panel, making CW switches ideal for applications where panel space is limited.

This monitor has a WXGA high-resolution flat-panel capable of displaying over 16.7 million colors with a 1000:1 contrast ratio.

5300 series current sensors and transformers measure a wide range of AC currents by transforming them accurately from high to low measurable values.

The Model XLK has load sensing elements built into each shackle leg with accuracy up to 0.15% over ranges from 1,000 to 20,000 lb.

The Gigabit-Ethernet board-level GigE uEye LE camera is now available featuring a high-resolution 5 Megapixel CMOS sensor from Aptina.

UniStream has dual CPUs, scan time of up to 2048 I/Os over 2MB of operand memory, a variety of HMI touch panels, and local and remote I/O.

This IP 67 rated module combines compressed air measurement, EtherCAT connectivity and digital I/Os for use directly in the process, outside of electrical cabinets.

The AM8500 servo motor series is suitable for all applications with larger external mass inertias, in particular CNC applications in machine tools and woodworking machines.

Flowline includes EchoTouch, EchoSpan, and EchoSwitch ultrasonic liquid level sensors and transmitters, as well as the PodView digital level indicator.

Spark SP-20000M-PMCL and SP-20000C-PMCL 20-megapixel industrial cameras feature a global shutter and a full frame rate of 30 frames per second.

EEx E and ATEX rated cable glands are now available in metric or PG threads in a range from M16 to M63 and PG7 to PG48.

The ER5000 is a microprocessor based PID pressure controller, providing localized control and automation with accuracy of 0.1% FS and response time of 25msec to ensure desired pressure even as system process parameters change.

EIB 1500 is an interpolation and digitizing electronics unit for digital calculations of two scanning heads which are mounted roughly 180 degrees apart.

TC-ER STOOW MTW cable offers torsional, rolling, variable, bend, radial and continuous flexibility from -25°C to 105°C and an extreme cold bend temperature rating of -40°C.

For use with both medium and large Fisher sliding-stem control valves, the 685 actuator is suitable for general, severe, and critical service applications.

40 A QUINT buffer module provides standby power for short-term losses of power without the need for maintenance.

8 Channel Data Logger TC 800D FEATURES: ◾Used latest micro controller based technology for better accuracy. ◾8 Channel fixed input for all thermocouple, J,K,R,S,T,E,B, N programmable by users & RTD (PT-100), 4-20mA, 0-10 VDC factory settable. ◾Easy on-line field calibration by front panel membrane keypad ◾Field programmable channel scan time 1 to 59 sec., Logging interval 1 to 9999 sec & Printing Interval 5 to 9999 sec. ◾Field programmable Delay time 1 to 99 sec. for Relay Output ◾Optional RS-232 / RS-485 Modbus Serial Port ◾Optional Parallel / USB Printing Port APPLICATIONS: ◾ISO Certification records, Validation process certifying ◾Pharmaceutical process validation with graph & excel report in Autoclaves ◾Online profile recording for Oven & BOD, Incubator, Humidity Chamber ◾Winding temperature of generators, Bearings, motors, transformers ◾To know heat Profile in furnace, foundries for Heat treatment application ◾Primary & auxiliary temperature scanning of boiler ◾Chemical & Hazardous area where data monitoring is essential ◾Room Mapping in Pharmaceutical

Series 30i/31i-L Model B CNC high-speed laser control has Ethernet and Ethernet/IP field bus options and FANUC NCGuide simulation software.

K30 Touch button provides simple, precise performance, easily changing from green to red with the touch of a finger, hand or whole palm—with bare hands or work gloves—for bright, clear indication.

RDS5201 Rootkit Detection System is a custom-built hardened appliance which detects low-level, zero-day rootkits--the lethal payload of most advanced persistent threats (APT).

The PXIe-9529 features a vibration-optimized lower AC cutoff frequency of 0.3 Hz, and all input channels incorporate 4 mA bias current for integrated electronic piezoelectric (IEPE) signal conditioning for accelerometers and microphones.

Built to withstand the rigors of deployment in the energy sector, the LEC-3012A offers a variety of I/O options, all equipped with magnetic isolation and optical surge protection.

Featuring a highly sensitive 640×512 pixel resolution thermal detector, the A6700sc produces exceptional temperature-calibrated IR imagery for demanding research and science applications.

The 5730A measures ac current, ac voltage, and resistance, and has a large full-color, touchscreen display that brings all of the calibrator's status and settings into one location.

White Balance Adjustment is a LabVIEW executable program used after the initial sensor setup using ColorMax software, making it possible to make fine adjustments to make one sensor closely match another.

This flexible-PVC, XLPE-insulated power cable is ideal for applications with high voltage spikes and long cable runs due to its low capacitance.

When used with a current clamp, the data logger measures and stores up to 127,232 AC and DC current readings over a 0-1000 amp DC measurement range (0-723 amps for AC).

PIC24FJ128GC010 is an analog system on a chip that integrates a full analog signal chain, including on-chip precision 16-bit ADC and 10 Msps 12-bit ADC, plus a DAC and dual operational amplifiers. Price: from $2.59

GTi10, GTi20 and GTi50 are now available in models with temperature measurement ranges up to 600°C (1112°F), 1000°C (1832°F) and 1500°C (2732°F).

ER-500 allows users to connect the company's Industrial Oval Gear (Model IOG) flow meters to a network for remote monitoring and process automation capabilities.

Model AP/APX RF admittance point level sensor is now available for use where internal vessel temperatures can reach up to 842⁰F (450⁰C).

Products include a 3U 16Amp PXI Switching Module, a 5Amp PXI Power Multiplexer Module, a 32-Channel PCI Digital I/O Card, an upgrade to its LXI Modular Chassis and an upgrade to one of their PXI Microwave Multiplexers.

Products include the EPack SCR Compact Power Controller, the Versadac Scalable Data Recorder, the Optivis HMI Operator Panel and OmniSlim Signal Conditioners.

The energy logger conducts key measurements of voltage, current, power, and power factor to identify areas of energy waste. All measured values are logged automatically and can be reviewed during logging.

Version 7.3 of PlantState Suite allows users to configure and receive alarm boundary notifications to proactively manage safe plant operation.

Inductive sensing is a contactless sensing technology that can be used to measure the position, motion, or composition of a metal or conductive target, as well as detect the compression, extension or twist of a spring. Price: $2.95.

Flexium+ 8 CNC kernel is for machine applications that require movement of up to five axes. It has two CNC channels and accommodates up to four simultaneously interpolated axes.

Deeternet Wireless Gateway offers wireless viewing of data from up to 200 sensors using a web browser.

The IRTracer-100 offers 60,000:1 S/N ratio, which allows researchers to quickly and easily obtain high-quality data of ultra-small contaminants.

FactoryStudio Enterprise has a .NET real-time framework designed specifically to integrate with the PI System through a deep-level native communication layer interface.

AP22M pilot lights are ideal for outdoor applications, such as operator controls where visibility from any angle and status indication are crucial at any time, even in bright sunlight.

RL830-C602-J/C604 motherboard in the EATX form factor has the Intel C602-J/C604 chipset and support for dual Intel Xeon E5-2600 v2 processors.

Suitable for printing and converting applications, Simotion SDC can synchronize motion between multiple Simotion controllers over a Profinet network, allowing 100+ axes to be engaged simultaneously or grouped, as needed.

PICO822 supportsthe newest ultra low power Intel Atom processor E620T 600 MHz and E680T 1.6 GHz with the Intel Platform Controller Hub EG20T.

FW-8877 is a 1U rackmount with a wide range of modular interface options supporting 10GbE over copper or fiber.

The XP2i test gauge is now available in a 15,000 psi version.

The 5A, 5V thermoelectric controller combines high efficiency Pulse-Width Modulated (PWM) control with temperature stability.

Rotary encoders provide a single encoder safety solution for many applications such as packaging, automation, and robotics.

The V-Link wireless node now accepts up to seven analog sensors, digitizes output with 16 bit resolution, and transmits time-synchronized condition data to a remote wireless gateway.

A single Focus II Light Curtain or Light Grid model can be used for all applications, eliminating the need to order or stock a multiple versions for varying machine safety requirements.

SMD23E now has IP67 protection, rugged M12 connectors, and communicates with the host controller (PLC or PAC) via EtherNet/IP or Modbus-TCP.

Flow meters have interchangeable direct reading scales for Air, Water, Argon, Oxygen, Carbon Dioxide, Nitrogen, Helium or Hydrogen.

VCS-10 Voice Coil Stages feature sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture.

CS-EM BTU Meter/Energy Meter measures energy flow in heat exchange loops in HVAC, solar, geothermal and process systems.

The right angle makes it easier to reach wires and cables in difficult locations.

The flat fascia and IP66/IP65/NEMA4X rating makes these PLC/HMIs a perfect fit for the food & pharmaceutical industries.

The RFID portal is suitable for tracking assets, equipment, document, files, and people in interior environments passing through doorways, hallways or corridors. You can make it pretty, too.

The Fisher 98 Series Backpressure Regulator/Relief Valve is now available with a body made from high strength titanium.

Junction box can consolidate up to eight individual, localized analog or discrete signals into a single device.

Version 2.3 of EPLAN focuses on standardization and automation based on EN 81346 and the safety values focused VDMA 66413 exchange format.

The sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to a rotating shaft, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear.

AMB-D255T3 features onboard graphics via VGA and HDMI, DDR3 SO-DIMM support, PCI slot, mSATA socket with SATA & USB signals, and ATX connector for easy power in.

The Weighing, Labeling and Sortation System automatically weighs, labels and sorts a wide range of package, box and envelope sizes to reduce costs and improve accuracy in warehouse shipping operations.

XZR200 oxygen analyzer is capable of measuring percent oxygen content to better than 1% of span.