Industry Products

Products and enhancements provide high-performance, closed- and open-loop drive control on EtherNet/IP.

Catalyst SDP™ is a system development platform that dramatically simplifies software and system development for manufacturers, system integrators and OEMs / ISVs. It allows users to quickly and easily assemble software solutions from reusable components in a visual development environment.

EtherNet/IP capability makes the Promass 83 attractive to machine and skid builders operating in the hybrid process/discrete control industries.

Gateway enables a Profibus-DP Master to read and write J1939 network data for control and monitoring tasks.

Soluiton provides timely restoration of power and processing plants to commission in the event of a natural or man-made disaster.

AZX series servo drives can control brushed, brushless or voice coil motors in rugged environments.

DataFlex-1000 and DataFlex-1000A are now available with fully-integrated, built-in signal conditioning.

IPPC-8151S comes with a food safe rubber seal between the bezel and the chemical resistant touch screen, and a fully sealed 316L stainless steel enclosure.

The push-pull cable connectors have a maximum diameter of 9.5mm and accept cables with diameters ranging from 3 to 4mm.

FDR-1835 diffuse reflectance probe is designed for harsh field use in the large-scale sampling of wood chips and other biomass materials.

CygNet for Pipeline includes segment-specific implementation templates, device connectors and applications for standardized gas operations.

b-CAP gives users direct control of a DENSO robot and peripheral devices by means of a PC, PLC or other control device.

HYDRA can be used to monitor the ammonium nutrient load directly in the aeration basin of a waste water treatment plant as well as environmental waters, lakes, streams and wells.

The ultra-compact 22 x 24 x 24 mm camera features an 8-megapixel sensor and comes with built-in Auto Focus

Symbion Appliance provides a fully locked down approach to the deployment of analytical instruments in compliance with 21 CFR Part 11.

Rated at 300V/40A, the 828 Series features single-piece construction to simplify the necessary panel opening and eliminate alignment issues during panel assembly.

Three tiers of standardized panel design are offered with an assortment of available options.

Multiple access control systems can be easily managed from a single location.

The batteries are rated for ten years of expected life in a temperature-controlled environment (up to 25°C).

TM10 battery powered totalizer provides precise flow rate and total accumulated flow volume data for standard turbine meters.

DXER9 industrial grade, long-range 900 MHz radio will perform reliably in applications that prove too noisy or too far for standard WiFi based systems.

The illuminated 175D allows the operator to clearly identify which function is activated, even in the presence of adverse lighting conditions.

The NITRA™ CPS series of pneumatic position switches provides an interface between pneumatic actuators and electrical control systems. The solid-state switches are available in 3-wire DC, PNP and NPN normally open, and PNP normally closed configurations; switches available with either M8 wiring connector or 2-meter cable with wire leads; low-cost.

IntraVUE agent performs local scanning inside a firewalled network and reports the data back to an IntraVUE main scanner.

Enhancments include high temperature and high viscosity transducers that allow users to employ ultrasonic meters across additional applications such as heavy vacuum oil, Naphtha, and Kerosene.

SmartStart helps customers reduce energy costs, improve production planning, and identify sources of energy waste, while correlating energy costs with manufacturing production.

SS351AT and SS451A Hall-effect sensors can be operated by a North pole or a South pole, eliminating the need for the magnet polarity to be identified.

Enhancements include automated backup and recovery operations, and an auditing capability for collection and reporting of significant events on the system.

LB/FB systems support general-purpose or intrinsically safe applications with modules that can be mixed and matched on the same backplane.

Kübler draw wire series now has versions that measure distances ranging from 0.25 to 40 meters.

STR step motor drives, available in 4 amp and 8 amp versions, are DC input drives requiring a step and direction control signal.

IDEA integrated linear actuator, electronic drive, and control unit is fully programmable via on-screen buttons instead of complicated proprietary programming languages.

With 16 Fast Ethernet ports and 2 Gigabit SFP combo ports, the switch can aggregate up to 8 fast Ethernet and 1 Gigabit fiber/copper rings.

Enhancements include full-function, wall-to-wall warehouse inventory management capabilities.

PVC-coated cast-iron conduit body has UL Type 4X and NEMA Type 4X ratings on sizes up to two inches.

Enhancements include Foxboro SCD2100 and SCD2200 remote terminal units for oil & gas and water & wastewater applications.

Enterprise manufacturing intelligence (EMI) solution reports historian and operational data using role-based dashboards, presenting KPIs and real-time operational business metrics.

Mechatronic solutions consist of software tools, motion control products and support that reduce costs and development time for builders of sophisticated machines.

BLF push-in connector plugs provide fast and easy tool-free termination, with only a 20% reduction in wire pull out force when compared with screw clamping termination.

Only Godzilla can shake the SMB connector loose. It requires a disengagement force of 5 lb.

Suitable for submersible pumps, BIW is rated to 5,000Vac for up to 140A and features a pressure rating of 3000psig.

LD03 and LD05 have universal inputs of 85-260VAC or 110-370VDC and output voltages from 3.3VDC to 24VDC. Prices start at $7.60 in OEM quantities.

The APAX-5000 series has two standalone CPU modules working together responsible for different tasks. One is for HMI/SCADA while the other is dedicated for SoftLogic I/O tasks.

XCSD30E is a single-phase power supply with an input of 90-264 Vac and output of 5-15Vdc.

The FODK 23 sensor is screwed or glued onto a dry floor or base panel in the area where leakage might occur.

Configurable IP 67 rated I/O blocks for harsh environments permit switching of input channels to output channels and vice versa.

ROMeo 5.2 simulates steam turbines, gas turbines, heat recovery system generators, boilers, headers and several other plant utility systems.

EVP6472 has dual Texas Instruments (TI) TMS320C6472 Digital Signal Processors (DSPs) and design support from 3L’s Diamond multiprocessor tool-suite.

The compact industrial grade rack mounted chassis displaces only 1U of space in standard server racks.

LSM records network security events and alarms, even when communication links are interrupted, and can forward security event and alarm data to a central IT syslog server.

S10 and S17 sulfide analytical sensors provide accurate, reliable analysis of sulfide levels that helps ensure proper water treatment.

IQD’s cylindrical dome delivers a broad angle of illumination onto a part’s surface, reducing shadows that can make imaging shiny spherical and irregular surfaces problematic.

Two-axis versions measure angular displacements of up to ±80º while single axis models have a range of 0-360º

Firefly has a five-axis, vertically articulated, industrial robot arm with a 500mm reach. Price: $6,000.

SR22 series soft starters, available in 5A to 40A sizes, are overcurrent protected and feature two DIN-rail mountable frame sizes (45mm and 55mm).

EA7-T6CL-R panel is a 320x240 resolution QVGA display which supports up to 65,536 colors. Prices start at $495.

Additions include quick-disconnect and patch cables with LED indicators. Prices start at $10.75.

Barflex can measure the gauge and absolute pressure of liquid and gaseous media in a range from 500 mbar to up to 1000 bar with an accuracy of up to 0.1 % of full scale.

Interface allows ControlWave and ROC800-Series controllers to access multiple variables over a single pair of wires in a point-to-point or multi-drop configuration.

S8 sensors are packed in a miniature housing (14 x 42 x 25mm), but deliver high-accuracy detection usually associated with larger sensors.

LPC-395F PC includes front loaded removable media slots for both hard drive and compact flash media.

The LEC-7800 runs on the AMD 780E chipset and is capable of rendering dual streams of HD video from three different video out ports, which means it can display on two LCD or plasma screens.

Digital servo drive controller is suitable for DC brushed and brushless motors, capable of driving motors up to 200W RMS.

ETM allows the servo system to compensate for dynamic motion artifacts and to do a better job of executing the desired motion path.

NI sbRIO-9602XT, sbRIO-9612XT, sbRIO-9632XT and sbRIO-9642XT devices are designed for board-level OEM applications requiring extended temperature operation.

VideoMASTER simplifies the testing of multimedia devices by using configurable measurement steps within NI TestStand test management software to automate a full suite of video measurements.

Adapter connects field wiring to DB9 connectors on USB Serial adapters, Ethernet Serial Servers, and other RS-485 products with a DB9M connector.

User-programmable AFS60 Singleturn and AFM60 Multiturn encoders reduce and simplify stock requirements, and maximize machine uptime.

The PD180 is a suitable sensing solution for industrial doors and gates.

Enhancements include a UPS controller, batteries, and Buffer and Redundancy modules.

Enhancements include support for the Mobile Industry Processor Interface (MIPI) D-PHY standard, used by manufacturers of wireless mobile devices.

MTS reduced the length from 2.5 to 1.44 in., enabling the linear-position sensor to fit into even tighter package spaces.

USB-4702 is a 8-channel, 12-bit, 10 kS/s multifunction USB DAQ module for testing, lab, student or training use.

Rosemount 3051S measures three variables and provides mass and energy flow output, reducing the number of devices traditionally required to make DP flow measurement from ten to one.