Industry Products

EKI-6311G 802.11 b/g Wireless Access Point, Client Bridge and Repeater offer standards-based and license-free wireless connectivity.

The insensitive B-Series eliminates the need for costly temperature and pressure control devices and systems.

FPM-8192V 19” SXGA TFT LCD has a transflective display, DNV certification, and IEC-60945 & IACS-E10 approval for marine industry applications.

Limitorque MX/QX dashboard software allows customers to communicate with Limitorque MX and QX actuators via Bluetooth for configuration and diagnostics 30 ft away.

Enhancements in CIMPLICITY 8.0 include Microsoft-fluent User Interface (UI) technology, new graphics, Digital Graphical Replay, and improved security.

NetBurner Security Suite with SSH is a small footprint security solution for embedded network devices that require secure communications.

Vacuum gauge controller can perform measurements ranging from atmosphere to hard vacuum.

HDS Series low profile detect switches sit just 1.4mm off the PC board and have a footprint of 3mm x 3.5mm.

BIS-6550HD is capable of full HD real-time decoding of H.264, VC-1 media contents at up to 40Mbps, MPEG-2 at up to 125Mbps, as well as playback of Blu-ray.

MP730 through MP760 sealed limit switches can connect through an M12x1 connector, which maintains IP67 protection on the switch.

EISK16 provides 16 copper 10/100 Mbps ports in a box smaller than a standard EIS 8-port unit for $279.

The Rosemount 848T wireless transmitter monitors up to four independently configurable RTD, thermocouple, ohm, millivolt and 4-20 mA inputs at the same time.

The economizer savings tool helps contractors who want to show customers how making improvements to their buildings can save energy.

NetBiter.net provides monitoring, control, trending and alarm management of remote devices anywhere in the world.

FW-8881 and FW-9991 are suitable for network security applications such as gateway antivirus, firewall, unified threat management (UTM), and intrusion detection and prevention.

Omnian can handle a wide variety of sample types such as solids, pressed powders, fused beads, loose powders and liquids.

RT products include feed-through and ground terminal blocks for cables fitted with ring lugs in sizes from 1.5 mm² through 35 mm².

SRH measures relative humidity in a room, duct or outside and is available in accuracies of ±2%, ±3%, and ±5%.

Sitrans WS100 monitors belt speeds up to 392 feet per minute for input to an integrator, PLC or belt scale.

NetBloc provides engineers with a method of organizing, managing, terminating, grounding and labeling networking connections.

Optimized for multiprocessing and Gigabit Ethernet, the stack supports low level TCP, UDP, IP, IGMP, ICMP and ARP stack protocols.

Tension Release Tail operates at the push of a button to relieve tension on the belt by quickly flipping up and out of the way.

Loop-powered Micro Motion 2200S transmitter is now available on ELITE Coriolis meters for line sizes ranging from 1/8” (3mm) to 6” (150mm).

Program Transfer tool provides a simplified graphical interface for “drag and drop” of files between a PC and CNC control.

Tiny SS361RT and SS461R sensors can be used for industrial applications such as speed and RPM sensing, tachometer, flow-rate sensing, valve/damper position, brushless dc motors, and more.

InPro 6870i is for use in bioreactors where SIP is used for sanitization.

G3 Kadet provides a cost-effective solution for simple communications between multiple devices and protocols in OEM, machine monitoring and control applications.

RTI Data Distribution Service real-time messaging middleware, has been integrated with Security-Enhanced Linux (SELinux).

One Series is now available in explosion-proof pressure and temperature models for Division 1 (Zone 1) and Division 2 (Zone 2) areas.

Available in two current ratings, the 500W Bantam has a tiny footprint of only 3.8 square inches.

Enhancements include SAP certification against the latest version of SAP’s R/3 ERP system and its NetWeaver service oriented technology platform.

CJ position controllers use a high-speed motion network to provide precise control of 2, 4 and 16 axes.

CTIN CM 1.6/2.5 and CTIN CM 3.6 crimp six types of turned/machined contacts, including types HD, HE, HX, M3, M5 and M10.

FMM20 pump is engineered to serve significantly longer by delivering more than 250 million strokes over its lifetime.

DNP3 authentication ensures that messages arriving at the RTU come from the control center or another legitimate asset in the SCADA system.

XCSA converters are available in versions with inputs ranging from 12 to 110Vdc and outputs of 12 and 24 Vdc at 5 to 10 amps.

Web-based enhancements provide users with thin-client capability for version control, audit trails and secure access.

Solution enables the exchange of design, engineering and manufacturing data between Siemens and Dassault.

GSM/GPRS serial modem provides global access to machines and systems via GSM cellular phone connections.

SNAP-AIPM-3 measures volts AC RMS and amps AC RMS. The module calculates true power, volt-amps, and power sums for all three phases of power.

Handy thermal imager allows for affordable pocket-sized portability with capabilities normally found in larger, more expensive thermal imagers.

Rosemount Analytical X-STREAM analyzers attained certification for hazardous areas, such as refining and petrochemical facilities that require Class I Zone I and ATEX Exd IIB approvals.

PSI Series measures pressure on systems with media that may clog instrumentation or solidify.

ConnectCore 9M 2443 and ConnectCore Wi-9M 2443 are claimed to be 33 percent faster, making them ideal for display and embedded applications.

SWT series of speed switches for monitoring and protection of rotating and reciprocating machinery are DIN rail mountable.

7150 Headspace Preconcentrator recovers thermally labile compounds for GC and GCMS applications, such as those containing sulfur, phosphorus and nitrogen.

OPS increases the effective encoder position resolution by a factor of 4, by recording encoder signals with a high level of synchronization.

JB Series achieve 27” Hg vacuum for pick-and-place applications, such as suction cups.

ThreadX V5.2 introduces developer-friendly features, such as dynamic event filtering, expanded event trace, SMP enhancement, and a significant reduction in global memory requirements.

With the RF4CE software stack and reference designs, manufacturers can build interactive, long distance remotes that are essentially maintenance free and able to run on a single coin cell battery.

Embedded software includes INTEGRITY real-time operating system, MULTI development environment, optimizing C/C++ compilers, and DoubleCheck static analyzer.

USB programming cards connect CUB5 and PAX meters to almost any computer, with no serial converters or other external devices needed.

137001 active UHF beaconing RFID tag sends data to a mobile (handheld) or fixed reader (interrogator) at distances of up to 300 feet.

Grip conveyor chains are used for gripping, collecting and transporting thin-walled, large-surface materials.

Type ECH_0101X_DC combines an ultrasonic sensor and a transducer with a large 2x20-digit LCD display in IP68 cast aluminium enclosure.

3300 series adds Modbus ASCII and LevelMaster protocols for a potential reduction of up to 60% in start-up, programming and on-site maintenance-related costs.

MAC-PWM card can be ordered with either one or two high current PWM outputs up to 5 A, and ASCII and ModBus RTU protocols. Price: from $79.

Signal Towers are available in red, yellow, green, blue and clear LED color options, and provide 100,000 hours - or more than 11 years - of continuous operation. .

TeSys D contactor with Everlink termination technology provides reduced installation time, increased reliability and space savings.

Enhancements include Autoconnector, which automatically builds flowsheet interactions from inlet producer contracts, and automatic scheduling of daily model updates.

CS6910 Series cameras are available with all major interfaces, including Gigabit, Camera Link and FireWire.

Enhancements include expanded alarm and event visibility, faster navigation, and better security.

Sensors now have transparent rear housings and improved electrical connections including metal M8 connectors, molded M12 connectors, and a cable channel for restricted space applications.

MKR hygienic version has an aluminum profile that is smoother than standard MKR bodies to prevent build-up of liquids and foreign debris.

GP52-195 requires only 1.3 Amps at 24Vdc to generate full load torque.

PXI-8110 provides up to 80 percent performance improvement over dual-core controllers with similar CPU clock frequencies.

1270-857 manual valve is used in repetitive fluid dispensing applications where operators dispense beads or drops of material in adhesive bonding or component sealing applications.

Paracube sensor delivers a measurement range of 0-100% of O2 with measurement stability enhanced by digital signal processing.

SMARTEYE X-PRO Model XP10 works as precision registration mark sensor or as standard photoelectric sensor for high speed parts detection and counting applications.

EA120P hollow shaft encoder carries an IP54 housing rating and operates from 0 to 60ºC.

C-more panels that support Ethernet now offer remote access. Any PC Web browser can monitor the local system from the Internet or local network. This feature resides in the software. Levels of security include: view only, view/allow screen change, or full control. Authorized users can test/monitor/control operations; and view/print/save active screens.

FPT-750 can be used for on-line NIR and UV-Visible process analysis in the chemical, petroleum, and pharmaceutical industries.

LH Series is available in 5W, 10W 15W, 20W and 25W power ratings. Pricing starts at $9.95 in OEM quantities.

Busbar can accept a wide range of slide-on terminal connectors that allow quick and easy connection of the wire to the busbar.