Industry Products

Both handheld thermometers combine contact and non-contact temperature measurement capability in one tool for industrial, electrical and maintenance professionals.

The SJ700 is available in 250 hp, 400 hp and 500 hp models.

Rotary Encoder Collars mount directly onto any shaft to allow speed sensing via a variable reluctance sensor.

FCD QDrive IP66/NEMA 4X enclosed decentral drive is available for wall or rail mounting in any position, or atop the motor itself when ordered without a circuit breaker or output contactor.

RAL series has a multiple-beam light grid and one-piece metal slot housing with slot widths from 50mm to 150mm for simplified mounting and alignment.

Connectors have a contact pitch of 0.635mm, providing significant space and weight savings when compared to conventional micro-miniature connectors.

The 7I43 uses a Xilinx Spartan3 FPGA for all logic. The FPGA is downloadable from the USB or Parallel port bus, or via local configuration.

A user can select the output as either two switch points or a 4-20 mA analog output with one switch point.

Capable of handling current to 40A in a low profile design, Cm5 connector is ideal for small servomotor applications requiring high current.

The HEC-2000 is programmed using Divelbiss EZ Ladder software which supports ladder diagram with function block programming.

C4000 display shows absorbance, transmittance and concentration for UV, VIS, NIR, absorption-based and scattered-light based sensors.

The connectors now have a voltage range from 48VAC to 630VAC, making them suitable for both low and high power applications.

Accepting any 12 Vdc source, including battery power, this Gear Motor is rated for 47 in-lb continuous torque at 83 rpm and has a failsafe brake.

Data from of the VS720A cameras are transferred to an automation system simultaneously and deterministically via Profinet.

ETM830 and ETM820 offer high performance computing power, flexibility, better graphics, and fast SATA support

MESA 5I23 uses a FPGA for all logic. The FPGA configuration is downloadable from the PCI bus, allowing creation of almost any kind of specialized I/O function.

The Ovation SCADA system features monitoring, control and diagnostic functionality that optimizes wind farm operations.

ISM reduces the installation, maintenance, and calibration effort for pH, O2 and conductivity sensors to a minimum.

This latest version includes enhanced features for lowering the maintenance and administration costs of overall operations management.

ST10 drives now have Si Programmer Windows-based point-and-click graphical interface.

SMP I/O for utility plants and facilities reduces the amount of wiring required, as well as configuration and commissioning time.

All models – CM-140GE, CB-140GE, CM-200GE and CB-200GE – have a 29 x 44 x 75mm housing and are equipped with standard GigE Vision / GenICam digital interfaces.

Update allows T-BOX line of RTU products to communicate with a network of Coronis Systems wireless sensor products.

SEI-USB connects Serial Encoder Interface compatible devices to a standard USB 1.1/2.0 port.

UNO-2176 Pentium M 1.4 GHz/Celeron M 1.0 GHz embedded automation computer supports a pre-configured Windows XP Embedded OS and Windows CE 5.0.

Enhancements include Tabular Recipe Editor, new ActiveX Controls, and integration with Proficy Process Systems.

Enhancements include new graphical displays, time domain module, benchmarking, and Vista compatibility.

The 75-Ohm SMB Connector series provides consistent low mating and un-mating force in positive lock mating as well as snap-on mating faces.

The programmable gateways may be used to control a variety of I/O including digital, analog, serial and RFID.

Model 7141 Dual Multiband Transceiver with FPGA is a complete software radio system for connection to HF or IF ports of a communications system

Teak 5010 is compatible with Windows operating systems and Linux systems such as Red Hat, Fedora, and FreeBSD.

Enhancements include improved state matrices, simpler but more powerful simulation and more extensive help and example models.

Limit switches provide quick installation, wiring ease, simple setup, modularity, sturdiness and reliability.

AutomationDirect now offers Stride™ industrial-grade unmanaged Ethernet switches and media converters. Built for industrial environments, these Ethernet switches are designed for PLC, HMI and drive users. Products include 5-port and 8-port switches, 4-port and 8-port Ethernet switches with one 100BaseF fiber port, and an Ethernet to Fiber Media Converter. Prices start at $99.

MLC is capable of up to 64 axes of control with the ability to handle up to eight robotic kinematics simultaneously.

Software helps utilities improve the performance of their power generating facilities.

The scheduling module enables users to create a prioritized list of jobs to run on each machine in the factory, using a Web browser to select part numbers, part quantity and due date for each job.

GraphWorX64, a core component of the GENESIS64 suite, is certified for Windows Server 2008 as well as Vista.

Web-enabled SCADA software development platform for site-wide automation is open, complete and scalable.

AutomationDirect offers three insulation types of electrical wiring for industrial applications: MTW - Machine Tool Wire TFFN - Fixture Wire THHN - General Purpose Building Wire

DB-SQL, a lightweight relational database management system, is suitable for embedded systems and mobile devices.

The flow sensor delivers an amplified, temperature compensated output signal with high accuracy and repeatability, even at very low flow rates.

Econo-Vue models are available in five different sensing modes and provide sensing ranges up to 20m. All models are available in straight and right-angled housings.

CompactBlock Guard I/O on EtherNet/IP safety I/O module detects failures at the I/O and field-device level. It works with safety PLCs.

The billing software enables commercial property managers to allocate and recover the actual cost of their utilities while adhering to government cost allocation regulations.

The Modbus/TCP driver supports connection to Modbus/TCP Slave devices directly, Modbus RTU/ASCII slave devices via Modbus/TCP to Modbus RTU/ASCII bridge, and Modbus PLUS slave devices via Modbus/TCP to Modbus PLUS bridge.

The Mini85 Sensor required a smaller more compact sensor with a large measurement range. The sensor is used in the ankle joint of the robot, sending force feedback to control the robot's motion.

Featuring a High Torque 3 Phase Drive and a 3 Digit LED Display Control Module, the IVSP is ideal for handling a broad range of fluid viscosities.

Designed to handle a range of tablock case types, Standard-Knapp’s Slitter/Sealer is engineered for maximum uptime and efficiency.

With isolated circuits, the PCI-1715U protects sensitive measurement circuitry from interference currents or voltages.

Starting under $1,000 with bundled TwinCAT PLC software and Windows operating system (OS), the EtherCAT-ready CX1010 is positioned as the new mid-range performance device in the scalable CX Family.

DataMan 100V verifiers check the quality of Data Matrix codes to ensure only well marked parts enter the manufacturing and supply chains.

The Allen-Bradley PowerFlex 40 AC drive and the ArmorStart product lines have packaging options that are now rated by the National Electrical Manufacturers Association (NEMA) and Underwriters Laboratories Inc. (UL) NEMA/UL Type 4X/12 (IP66/54) for indoor use.

The KLEENline Vertical Lift System can incorporate up to six lifting lanes for transferring “products-on-demand” into a scale and/or bagger from a central location at floor level by one operator.

Intended for general purpose applications, THHN building wire is 19-strand 600V uncoated copper wire available in 4-14 gauge sizes, making it ideal for new construction or rewiring 600V applications, THHN can be used in wet or dry locations.

Built for industrial environments, the new Ethernet switches are designed specifically for PLC, HMI and drive users. Available are 5-port and 8-port Ethernet switches, 4-port and 8-port Ethernet switches with one 100BaseF fiber port, and an Ethernet to Fiber Media Converter.

MOST's process control system, Matrix v. 8.2, leverages the Wonderware System Platform 3.0 software to automatically manage and coordinate the development, modification, and deployment of control application components.

The new Sorensen XG Series, in the classic Sorensen black design, is available in 12 models ranging in power from 6 volts to 600 volts. The series is designed for a wide range of production test, laboratory, original equipment manufacturer (OEM), and quality assurance applications.

ABB's new Navigator 600 Silica analyzer substantially reduces the amount of reagents and maintenance generally associated with silica analysis, while providing accurate and reliable silica monitoring.

This component drive is designed as an entry level product for new users, and is aimed at various applications, particularly exercise training equipment, gate control, pumps, fans, conveyors, packaging machines, x-ray screening machines, material handling, ovens, powered roof ventilators and heat exchangers.

The expanded circuit breaker product line now includes UL 1077 supplemental protection, UL 489 branch circuit protection and a new DC breaker family with UL489 listing.

The TE1 measures process temperatures from -50 up to 250°C and can be configured individually according to customer needs. It is also available with 3A approval for hygienic applications.

“All-in-one” Ethernet controller features 5.7-inch display, flexible connectivity options and Windows CE. The cabinet mounted CP6608 comes equipped with two Ethernet ports with 10/100BASE-T, two fast USB 2.0 ports and a serial RS232 port as external interfaces.

PRM is a key component of Yokogawa’s Asset Excellence initiative that integrates and manages maintenance information, monitors online conditions, and records historical data of assets ranging from field devices to plant equipment.

The new rugged high-performance MINI-EYE Laser Sensors are the ideal solution for a wide variety of the toughest inspection and position control applications found in the most complex packaging, material handling, pharmaceutical, semiconductor and medical manufacturing processes.

SecureGAP safeguards vital proprietary information for applicaton owners through security and data segragation which serves as a gatekeeper and natural firewall between the host processor and the Internet as well as significantly cutting connectivity costs and simplifying deployment.

Built for long life (several million cycles) and superior performance, the size 11 linear actuator features engineering thermoplastics in the rotor drive nut and a stainless steel Acme lead screw.

Symbol Factory .NET is a .NET component for engineers and developers building machine HMI applications in Visual Studio .NET 2003 and 2005 using Visual Basic (VB) or C# languages.

Designated the BSM R-series, the new motors are expected to appeal to automation equipment builders seeking to improve the productivity of machinery in applications such as packaging and labeling, materials handling, semiconductor manufacturing, winding and printing.

MAE “HY Series” hybrid stepper motors are offered in four standard NEMA frame sizes (16, 17, 23, and 42) with step resolutions of 1.8º (200 steps per rev) in full-step mode.

This new design allows for a secure, sealed connection through a panel allowing M12 connectors to be connected on either end.

Dickson's Wireless Wizard data loggers can be monitored in real-time from a desktop PC or other computer workstation and totally eliminate the delays for data downloading and cumbersome cabling of other temperature and humidity data logger technology.

The Intel Q35 Express Chipset is integrated into both the PCIE-Q350 and IMB-Q354 and is interfaced through a scalable 1333/1066/800 MHz front side bus (FSB) to an Intel Core Duo processor or a future 45nm core Intel processor.

The IEI quad-core LGA775 platforms are ideal for integration into demanding multitasking applications that require high data throughputs, extreme reliability and precision.

Integrated 500MHz AMD LX800 maximizes power saving of AFL-10A-LX. Low power utilization increases the clock frequency, improves reliability, decreases the noise margins and reduces both the capital and operational costs.