Industry Products

InfiniTouch enables any semi-rigid material, such as metal, glass, wood, stone, ceramic, plastic, or any combination of these materials, to sense touch.

Enhancements include bar code reading and optical character recognition (OCR) capabilities on the 2D cameras, and an expanded range of 3D solutions.

TSA-100 can provide accurate total sulfur measurements when interfering compounds like H2S, SO2, and mercaptans are present in the sample.

GC provides measurement of a wide range of natural gas values, including hydrocarbon dew point, a key natural gas quality parameter.

The ability to analyze route-based IR images of plant equipment allows consistent thermography coverage of facility assets and integration with other machinery health data.

The meters provide 1000:1 turndown allowing wide rangeability with a single unit. Available in line sizes from 1-16 in.

New software releases include MNS-6K-Secure for Magnum Ethernet switches, and MNS-DX Release 1.3 for Magnum DX routers and terminal servers.

Enhancements to the R-Series flex sensor include higher performance, LEDs, circuit protection, external programmability, and longer stroke capability for hydraulic cylinder applications.

PA30 has a four-in. print width with left hand orientation and a five bolt mounting pattern.

ETL pneumatic, below-the-hoist lifter with rubber vacuum suction cups loads and unloads coils onto presses.

AT+i Version 8.0 supports network access for devices via dial-up (PSTN), Ethernet, WiFi, GPRS/CDMA, WiMAX and any existing and future IP-based mediums.

Embedded access to high speed BroadbandAccess network is now available on Panasonic Toughbook notebooks.

The 8720 has advanced diagnostic capability and can be operated in single, dual, or triple modular redundant configurations.

UEILogger series can now log CAN and ARINC-429 bus data as well as RS-232, 422 and 485 ports.

Skynax platform for mobile communications and handheld computer systems centralizes management and support.

ST75V thermal mass flow meter measures hydrogen, natural gas, and other gases in small line processes and skid-mounted equipment.

New models include Flange mounted, Flange mounted with slit clamp, built-in damper, and champfered head supports.

QC 1.5 plugs provide an Insulation Displacement Connection (IDC) based plug for use in an expanded range of wire gauges.

The PS3710A 15-in. Light-Duty Industrial Computer has a Pentium M 1.6GHz processor, which significantly lowers heat generation.

Available in 0, 14, 20 and 30mm sizes, WSL TR allows for top mounting of gripper arms or holders, which are adjustable parallel and perpendicular to the frame.

Delrin and nylon shaft collars with stainless steel fasteners are suitable for applications on food processing and pharmaceutical equipment and packaging machinery.

Asset Master can manage up to 500 ABB and non-ABB devices,including flowmeters, analyzers, actuators, control valves, and positioners that can be wired to a fieldbus.

Enhancements to Matrix Upgrade 2007 includes software, new functions and advanced performance.

NetBiter.net web-based central server for NetBiter remote field units does basic management of webSCADA devices connected to remote equipment.

HTS1501S combines an air turbine with ceramic bearings and a high accuracy spindle which results in extremely high speed, very low vibration, high rigidity and dimensional stability.

With the release of Lookout 6.1, automation engineers can upgrade to Windows Vista.

AF26 measures color and/or concentrations using light at wavelengths of 380 to 1100 nm.

TF16-N dual-beam NIR absorption sensor measures solids, turbidity, concentration, consistency and optical density.

Guidance System 4-axis, vision-guided motion control system allows the controller to be located at the point of use.

The 4203 is for well head optimization, two- and three-phase separator measurement, and flow and pressure regulator stations.

CUBE Manifold combines valves, printed circuit board, base and fittings in one compact unit.

Switches include a 5-port (EKI-2525), 8-port (EKI-2528), and a 10-port (EKI-7629C) configuration with gigabit Ethernet capabilities and fiber optic cable connections. Prices start at $95.

Enhancements include MS Vista 32 compatibility, Proportional Pneumatic Library, pressure line properties definition, Component Referencing with hyperlink tools and more.

New modules include 16-bit high-resolution analog modules designed for the DL05 and DL06 PLCs.

150W HEW Series has a 4:1 input range to accomodate 12, 24, and 48V input voltage requirements

CME-822 10-port Managed Power over Ethernet (PoE) Switch available with SFP.

Similar to an inductive proximity sensor, the sensor can detect any standard metal target such as stainless or mild steel.

ProSoft Technology’s connectivity solutions for Rockwell Automation platforms include a growing line of in-chassis PCs which offer greater functionality, programmability and connectivity. These powerful modules communicate directly across the backplane to a ControlLogix PLC, and offer the flexibility and processing speed of an industrial computer.

ProSoft Technology’s new inRAx Wireless EtherNet/IP Communication Module acts as a wireless bridge, enabling remote connectivity between a ControlLogix processor and 802.11 wireless devices including: PCs, Laptops, radio modems such as the RadioLinx® Industrial Hotspot™, and other MVI56-WA-EIP modules.

ProSoft Technology’s new ProLinx 6000 Wireless HART Gateways use a digital HART to wireless interface to bring high-speed connectivity to HART field devices and enable the sharing of data between these devices over-the-air.

Enhancements include fanless operation, low wattage 1 GHz Pentium M Celeron processor, and a continuous duty solid state hard disk drive.

Scalance Ethernet switches have up to 24 RJ-45 ports per module for Industrial Ethernet networks at data rates of 10/100 Mbaud.

Kübler 3650 and 3670 encoders measure absolute position magnetically, rather than optically.

ProSoft Technology’s RadioLinx modems are field-proven, industrial grade, and approved for hazardous environments. ProSoft’s Frequency Hopping Spread Spectrum radios in Ethernet, serial, and Ethernet with serial server are ideal for applications requiring additional security. Our Industrial Hotspot radios which can support high-speed applications including VO/IP, video over Ethernet, or Security cameras, and which can be tapped into by PDAs and laptops.

The 6-axis robot has a payload capacity of 1000 kg and a reach of 3200 mm for extremely heavy applications. Guinness says it's the world's strongest robot.

ER16 & ER32 Collet Chucks are available for BT, V-Flange and HSK63A & HSK100 tapers.

LVDT-8A provides eight channels of signal conditioning on one board at a price per channel of under $100.

The dual-channel DP1400 has an analog front-end with signal conditioning and A/D components and speed of 1 GS/sec on each channel.

DIN rail mounted line includes analog converters and isolator modules for most of the industry standard analog signals.

Block I/O enables connection of sensors and actuators to a control system through the SERCOS III bus.

Productivity Monitor web-enabled data analysis application aggregates and graphically displays key performance indicators (KPIs).

RFID PathMinder provides real-time, asset tracking for supply chain logistics, retail distribution centers and manufacturing.

The non-isolated single-quadrant current converters of the 340, 680 and 1220 series simply clip onto a DIN rail.

These switches have a robust housing with a flammability rating of UL94 V0 and industry standard M12 sealed connection ports.

The T208 Ethernet switch operates with high accuracy time synchronization on both the SNTP/NTP or PTP open standard protocols.

Additional models include WHI-15/60 (15A, 60VDC), WHI-10/100 (10A, 100V), WHI-15/100 (15A, 100V).

Its SW package includes operating system, device drivers, server applications, utilities, libraries and application development tools on a CF card.

SeaLINK serial devices connect peripherals such as barcode scanners, serial displays, and data acquisition modules to any USB port.

Indicator lights feature brightly colored solid or flashing LEDs for optimal viewing and are available in four configurations.

It counts up to 4096 and has outputs for commutation of brushless servomotors.

Ten detectors are available to monitor temperature loss, fluid flow, temperature rise, mechanical noise, fluid leak, mechanical wear, audible noise, vibration, tilt and mechanical insertion.

FF Series Contactless Safety Switches use magnetic actuators to detect if a door or panel has been opened or removed in a piece of machinery.

The GLL Series has been expanded with three new actuator styles and slow action circuitry.

The network supports multiple industrial protocols and applications simultaneously, providing a single wireless network that is simple to manage and efficient to operate.

HILS integrates identification and location technologies such as UWB, GPS, Wi-Fi and RFID with the Experion Process Knowledge System (PKS).

The power conditioner has an integrated diagnostics module that provides vital statistics for diagnosing problems associated with the fieldbus physical layer.

Sensor and software diagnostic tool helps measure nip width for maintenance of roller alignment and roller crowning.

Software supports file and folder actions, including file viewing and changing properties and creating, copying, moving, renaming or deleting files and folders.

These low-torque transducers withstand vibration, EMI, harsh environments, and offer 12-15 years MTBF.

HyperPierce allows infinite positioning of the part since the unit will equalize the force from both directions during the power stroke of the cylinders, then open the tooling in both directions.

It measures ultra-low-level seismic events and low-frequency vibration on structures and objects.

Hybrid system offers a mixed power and signal contact design, intended to accommodate DC power requirements.

The 5.7-in. 256 color QVGA 320x240 pixel LCD display has three front-panel LED indicators, and a five-button keypad for on-screen menus.

V18 sensors are now available in fiber optic, background suppression, polarized retro-reflective, thru-beam and diffused models.

Premier Integration drive profile reduces drive configuration time, eases operation and improves maintenance for PowerFlex AC drive applications