Industry Products

The Material Balance Module (MBM) for Advanced Real-time Performance Modeling (ARPM) suite, is a flowsheet-based solution that uses advanced mass and volume reconciliation to reveal sources of random error, bias, and gross error that jeopardize the accuracy of real-time plant data.

The actuator lifetime monitoring system continuously tracks the service life status of actuators while in operation and signals when actuator replacement is necessary. This enhances the reliability, safety, and availability of actuators used in industrial equipment applications.

Brush-commutated DC gearmotors achieve output torque up to 175 oz-in with standard sintered steel spur gearing, and output torque up to 500 oz-in by incorporating select gear ratios and high-strength gears.

The 56-Series Modline 5 has a 2 micron range and temperature capabilities of 122 - 1472° F / 50 - 800° C. It is suitable for spot weld or induction heat metal treating applications, as well as lower-temperature rubber, thick plastic or textile applications.

Models include the 32-channel SNAP-AIMA-32 current input module; 32-channel SNAP-AIV-32 voltage input module; and the 16-channel SNAP-IAC-16, SNAP-IAC-A-16, and SNAP-IDC-16 digital input modules. These I/O modules connect to and communicate with sensors, actuators, instrumentation, and equipment in industrial applications

The fanless industrial grade panel computer is suitable for HMI (Human Machine Interface) applications.

IndraLogic PLCs now have DeviceNet and EtherNet IP connectivity.

Housing holds one JetNet 3705 4-port industrial unmanaged PoE switch, one extra uplink port, and one extra uplink Fiber port. The housing has an aluminum case.

EQuan Environmental Quantitation System coupled with the TSQ Quantum triple quadrupole mass spectrometer is a turnkey system for the analysis of pesticides, herbicides, antimicrobials and pharmaceuticals in environmental and drinking water samples.

UEIModbus Ethernet-based data acquisition and control interface communicates with a host computer or PLC over Modbus TCP. It functions as a Modbus slave easily accessed by any software client acting as a Modbus master.

USB digital I/O modules include USB-4750 32-channel, USB-4751 48-channel, and USB-4751L 24-channel. All include USB connectors with screw fasteners and DIN-rail mounting kits. They draw power directly from the USB port and therefore do not require an external power supply.

The 82357B provides a direct connection from a USB port on a laptop or desktop PC to GPIB instruments. Its USB 2.0 connectivity offers easy plug-and-play setup, as well as a high-speed GPIB transfer rate of 1.15 MB/s or better.

The overall processing speed of the MicroSmart Pentra's CPU is 16 times faster for simple instruction execution, and more than 14 times faster when executing advanced instruction sets. It supports double-word and floating point math operations, capturing and storing large values, and returning computed results accurate to seven decimal places.

The AS5140H 10-bit rotary encoder IC is qualified to AEC-Q100 and designed for applications in an ambient temperature range up to 150°C. With a resolution of 0.35 degrees, it can recognize 1,024 positions within one 360° turn, and is accessible with either a serial or a PWM (Pulse-Width Modulation) interface.

MEN single-stage, end-suction pumps deliver maximum mechanical and hydraulic flexibility, and are ruggedly designed to provide reliable performance in a variety of water services. These areas include water supply, water treatment, irrigation, drainage, filter cleaning, water circulation and HVAC.

IV7C can read RFID tags anywhere within reach of a forklift. It can be configured to read multiple air interface protocols in mixed populations of tags, including EPC UHF Generation 2 (Gen 2) and ISO 18000-6b and 6c. It is both ETSI and FCC certified and RoHS compliant.

The EM-9360 is a low power SBC that offers a cost-effective solution for users requiring legacy feature support, low power and a small footprint. System designers can build on the EM-9360 with the confidence of guaranteed supply until 2010.

7/16 DIN connectors for LMR-600 cable include RFD-1600-2L2, which attaches to the cable with a solder/clamp method, and RFD-1505-2L-2, which attaches with a crimp/solder method. 7/16 DIN connectors are large format 50 ohm interfaces designed for high power wireless telecom applications.

IDENT Control RFID product identification and data collection solution is now available as a 13.56 MHz (HF) system. This transmission frequency enables more data to be transmitted faster making it possible to read large amounts of data on the fly. The system supports DeviceNet, Ethernet, and PROFIBUS protocols, as well as RS232 serial communication.

Enhancements include increased power, speed and expanded communication capabilities. An embedded communications port and Web server give users access to control information for real-time data sharing with OEM partners, remote maintenance engineers and personnel.

TES-5 Series of low profile, surface mount dc/dc converters offer 5W of power and a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation is 1500VDC. It has short circuit protection, remote on/off, operating temperature of -40ºC to +85ºC, with full load achieved up to +71ºC.

The E3000 Series incorporates 3-phase brushless DC motors for smooth rotation, high power, maximum speed of 60,000 rpm; and maximum power of 350W. The modular motors can be connected with a wide variety of Ultra-Precision spindles, straight, short length, 5 different 90° Angle Types, quick tool change and direct chucking, air release collet ATC types.

The active front-end devices in the b maXX 4100 series make energy regeneration possible in any servo system. Regenerative converters are effective on large machine tools or grinding machines, and machines running in reversing duty, where sudden acceleration followed by deceleration is typical.

MZ2Q Magnetic Cylinder Sensor has two programmable switching points. It can be taught to detect beginning stroke (retracted) and end stroke (extended) positions over a 2-in. (50 mm) stroke size. The sensor, which offers an IP 67 enclosure rating, can be completely recessed in the T-slot.

The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers.

Compact power supply has a universal auto-ranging input, which means the same part can be used with 340 to 550 Vac and provide a 24 Vdc output. The power supply is also available in a version that supplies a signal in the event of failure.

Multenet Router connects remote devices and networks to corporate networks or the internet.It includes USB connectivity and built in VPN functionality. The router provides secure cellular GSM/GPRS, 3G/HSDPA or PSTN connections for reliable primary and backup network connectivity to corporate networks or the internet.

Meister links development efforts to production results while reducing script redundancies and build errors. Build Services provides a layer of virtualization from ad-hoc scripting, enabling build best practices and build project management.

OptoDataLink is used to create and facilitate bi-directional data exchange between the SNAP PAC System and enterprise databases - like Microsoft SQL Server, Microsoft Access, and MySQL, among others. It is suitable for users who need to simply and quickly exchange data among desktop or enterprise applications and control, data acquisition, and monitoring systems using standard methods and file types.

The bmaXX 3422 drive is available with EtherCAT for controlling motors up to 12.5 kVA. It has cycle times of 250 µs over EtherCAT, tunneling of standard Ethernet TCP/IP packets through to the servo drive and seamless integration into the ProMaster Engineering Framework.

EasySize now has a Slider Crank mechanism, which considers the dynamically changing inertia, thrust and gravity effects for the Crank, Connecting Rod and Load Mass for any given motion profile. The motion profile can be specified at the Load (linear), or at the Crank (rotary).

Extensions to MULTI development tools reduce the memory footprint of the software used to build software-defined radios (SDRs) and automatically optimize the size of the system, reducing the size of existing SCA implementations without shortchanging radio designs by departing from standards.

Products in the license-free 2.4 GHz band include Frequency hopping (FHSS) radios, wireless gateways for PROFIBUS and HART, and in-rack wireless modules for PLCs.

Enhancements provide users with better support for their reliability centered maintenance (RCM) strategies, including enforcement and validation of critical asset information required for integration with third-party root cause analysis (RCA) solutions.

Allen-Bradley High-Power Kinetix (HPK-Series) servo motors are available in ratings to 150 hp, making them suitable for applications that require high power capacities, such as material handling or Web converting. This allows machine builders to increase acceleration and improve the positioning, precision and overall system throughput.

T-Mac can be mounted on moving robots, machines, or parts whose position(s) need to be monitored in 6DoF (Degrees of Freedom) space. Output is 1,000 points per second with measurement accuracy of 60 microns in a measurement volume of 15m (49ft).

WLD Series of wireless LonWork devices provide a reliable low-cost alternative to long runs of LonBus for establishing communications to previously unreachable locations, due to the lack of existing communications architecture.

User-configurable FPGA modules feature conduction cooling and differential digital I/O at a cost that is suitable for many mid-level computing functions. The modules provide the ability to configure custom I/O boards using application-specific instruction sets..

HP2008 hinge-operated safety interlock switches are suited for use on smaller guard doors. The switches are available in solid or hollow shaft versions and provide force guided contacts with tamper-resistant operation. A NEMA 6 enclosure enables them to withstand water washdown cleaning while providing a minimum of four million actuations

The SNAP-PAC-EB1 and SNAP-PAC-EB2 I/O Processors have dual, switched 10/100 Mbps Ethernet interfaces. This built-in two-port Ethernet switch design lowers network equipment costs by making it possible to build multi-drop I/O networks over standard Ethernet cable.

Impact-R 3010 series 3U 19-inch rackmount industrial computers use an Intel Core 2 Duo or Pentium 4 processor and a 3.5-inch Western Digital hard disk drive. They are powered by a 460W PS/2 form factor power supply unit.

Type LLM guides provide precise linear positioning, smooth operation, high load-carrying capacity, high stiffness, and unlimited stroke to meet application needs. Standard guides are available in four basic sizes (7mm, 9mm, 12mm, and 15mm); various slide configurations; and standard one-piece rail lengths up to 900mm.

Automation Sentinel extends support for existing ABB control software investments. With this program, ABB customers can keep their installed software products up to date and maintain a flexible and affordable path forward to evolve to the latest system software technology at the their desired pace.

MIC-3723, a 3U CompactPCI 16-bit 8-channel non-isolated analog output card, starts at $695. Each analog output channel is equipped with a 16-bit double-buffered DAC and has an auto-calibration function and BoardID switch.

U.C.ME-OPC offers alarm import from iFix, Cimplicity, InTouch, RS-View32 and Citect. This enables users to import alarms that are already defined in their SCADA/HMI software.

BMS-436 4-port high speed Serial Device Server provides reliable communication connection between RS-232/422/485 serial devices and an Ethernet LAN/WAN.

SCM WM 9.0 focuses on efficiency inside the warehouse with support for RF, voice, wave planning, cross docking and labor reporting. Outside the warehouse, the solution creates value by extending capabilities including Yard Management, Event Management, Performance Management, Transportation and Logistics, and RFID.

The IAC-H672 low power SBC has a VIA Mark processor and both PC104 and PC104+ expansion capabilities. Other features include integrated graphics with 3D support, dual simultaneous display capability, SODIMM support up to 512MB of SDRAM, and 10/100 Ethernet.

ODVA DeviceNet cable is available in ODVA-compliant thick (600V-rated), which exceeds CL2 and CL3 per NEC 725.61; thin (300V-rated); and special PLTC thin, designed with 22AWG data pair and PLTC-rated (Power Limited Tray Cable), which exceeds CL2 and CL3 per NEC 725.61.

Touch-safe fuse terminal blocks accept Class CC and Class J fuses to meet National Electrical Code requirements for Branch Circuit Protection.

The Allen-Bradley EWEB module for the CompactLogix Programmable Automation Controller (PAC) provides network connectivity and Web capabilities for simplified remote data monitoring, data sharing and troubleshooting, bringing large-machine capabilities to control system applications with less than 2,000 I/O nodes.

Enhancements to Version 7 of SIMATIC PCS 7 Process Automation System include integration of Foundation Fieldbus, configuration / change management, redundant fieldbus with safety communication, smart alarm management, cyber security, plant asset management and condition monitoring.

MS46 slides are constructed of lightweight yet extremely durable aluminum. This makes them ideal as the carried axis in a multi-axis assembly because they minimize the total moving system mass to allow the application of smaller, less expensive motors. Slides are available in virtually any desired length.

The switch supports up to eight 1 GB ports in a compact 1U rack-mount switch. The switches can manage both high priority streaming traffic, such as security cameras, VoIP, and identity scanners, and the bursty data traffic typical of manufacturing operations.

The USB-503 logs up to 32,510 voltage measurements over a 0 to 30 VDC measurement range. The USB-504 logs up to 32,000 current loop measurements in the 4-20 mA range. The tiny USB-501-LT logs up to 4,080 temperature measurements in the 14 to +122 °F range.

CRDV/S drain valve combines an electronic sensor with a solid-state integrated logic analysis circuit to determine the exact amount of time necessary to empty condensate from a pneumatic system.

Ethernet Powerlink Safety Technology is independent of the transport protocol, and is completely compatible with other fieldbus solutions such as CANopen. All safety-oriented mechanisms, which are open and available, are implemented in the data transfer process so that safety-relevant data can be transferred over a standard fieldbus. With this solution, safety functionality is completely integrated in the control system and does not require special cabling.

Micro Motion F-Series Coriolis flowmeter is available with Hastelloy C-22 construction, making it suitable for use in corrosive applications where the process fluid is incompatible with stainless steel.

The GF90 Insertion and GF92 Inline Mass Flow Meters have received ATEX approval for use in potentially explosive environments classified as EExd IIC T4.

T-LSR series of computer controlled motorized linear stages offer travel up to 300mm, loads up to 20kg, speeds up to 20mm/s and 0.25 um resolution. Stages may be mounted in x-y or x-y-z configurations without any additional hardware.

PC/104 utility boards have 48 individually optically isolated digital inputs, making them suitable for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Price: $349.

CSB and CSW series DIN rail mounted power supplies operate using only 2 legs of a 3-phase circuit, thereby saving space, cabling and circuit protection costs. The CSB series has a universal input of 340-550 Vac, whereas the CSW series has a universal input of 185-550 Vac in both single and 2-phase.

FFM-202I is optimized for use with incoherent instruments such as FTIR or diode array spectrometers. It employs an extremely robust clean-in-place design allowing a high degree of up-time even in the event of upset conditions such as those often encountered in process gas or dryer solvent off-gas monitoring, where upset conditions may occasionally coat the interior of the cell with powders or other contaminants.

SNAP Motion Control Subsystem offers a cohesive development platform for applications that require motion control along with analog, digital, and serial control. The system combines a SNAP Motion host communication module in a SNAP I/O form factor, a SNAP Motion breakout board, and the OptoMotion command library.

Symbion-DX and Symbion-RX Version 1.2.software for application development, networking, and on-line monitoring of process analytical technology adds several new capabilities, including a significantly expanded library of mathematical functions.

Data Distribution Service allows distributed applications to simultaneously support both IPv6 and the current-generation IPv4, easing migration to the newer standard. IPv6 support is required of all U.S. Department of Defense networks and applications starting in 2008, making it essential for engineers to begin adoption of this wide-ranging standard.

Ethernet Switch Selector helps determine the most advantageous switch to employ in your applications instantly and accurately. This easy-to-read selector answers questions for successful deployment including temperature range, port count, multimode or single-mode fiber, connectors, dimensions (in inches), and mounting.

Siemens has released the next generation of its mid-level touch and operator panels. The new 277 panel series replaces the highly successful 270 series with the latest LCD technology and advanced features that were previously limited to high-end models.

CGDP Series contactors are rated for up to 50 Amps for resistive loads and are available in one pole, one pole plus shunt, two pole and three pole configurations. Contactors are UL and CSA recognized, meet ARI 780 ratings and are RoHS compliant.

In Remke’s family of Tuff-Seal™ wire management products, customization means customers can mix and match from our extensive selection of special materials, wire mesh, components, threading, custom packaging and private labeling to develop the wire management product that meets specific application or environmental needs.

In Remke’s family of Tuff-Link™ industrial interconnects & cordsets customers can mix and match from our extensive selection of special materials, special hardware, special wiring, custom packaging and private labeling to develop the product that meets specific applications or environmental needs.

Remke’s family of Tuff-Link industrial interconnects & cordsets are used with sensors and control devices for easier initial installations & quick component replacement in all type of industrial applications. Custom products, specials & variations also available – even for small quantities.

Tuff-Seal™ Dome Cap Connectors from Remke Industries provide the utmost ease of use, durability and corrosion-resistance at surprisingly competitive prices. These liquid-tight, strain-relief connectors are offered in a wide variety of sizes and are UL & CSA approved.

HMG-628G Gigabit Ethernet Switch is compatible with 10/100/1000T devices, providing the flexibility to mix and match fiber interfaces. Web browser, SNMP, Telnet, CLI and menu driven management can remotely configure the switch.

SBL series can be mounted between conveyor rollers while providing package detection regardless of color. Sensors can be directly mounted with thru-hole mounting or can be attached with an optional mounting bracket.