Industry Products

DataCELL MVC-800H 1394b FireWire 800 cable meets the requirements of camera installations in more demanding factory environments. MVC-800 is a UL-recognized and CSA-approved AWM style cable, with two 26AWG data pairs insulated with foamed polyethylene and a 22AWG PVC-insulated power pair, 100% coverage foil/polyester shielding with two drain wires and an overall tinned copper braid for optimal shielding performance.

WTR dual-connection disconnect test terminal blocks provide companies in the process industry the ability to easily perform measurement and testing for quick failure detection. The terminals feature screw connection technology and are available in two versions: WTR 4/ZR-Branch, or WTR 4/ZZ-dual connections on both sides. These space-saving designs may eliminate the need for a second terminal block with jumper accessory.

Ensemble Epaq stand-alone controller is for applications from basic laboratory experimentation and general purpose positioning to advanced OEM systems. The Ensemble Epaq provides up to six axes of motion control in one integrated, stand-alone package. The Epaq can daisy chain three extra drives so that the customer can command up to nine axes of coordinated motion under program control.

SafetyNet literature provides a complete description of SafetyNet - its unique approach to safety functionality, how it meets the requirements of IEC 61508 and 61511 for SIL 2 certification, its applicability to Emergency Shut Down, Fire & Gas and Burner Management applications, and its integration with the MOST Process Automation platform.

IPS Tempo helps eliminate costly downtime and expensive repairs caused by dry running, blocked lines, pump overloads, closed suction or discharge valves, cavitation, and excessive wear or rubbing. Users can program IPS Tempo to respond to process and condition variables to protect pump equipment against adverse operating conditions, thereby optimizing plant output and pump availability and lowering total cost of ownership.

DIB01CM Series current monitoring relay has an 8 amp Form C contact output. The built-in current transformer, with 12mm through-hole, provides a means to save panel space and reduce wiring time, thus minimizing the total cost, space and connection time. The DIB01CM is ideal in applications where one is attempting to monitor for over or under current of an industrial load, such as AC fractional motors, heating elements, etc.

IMPACT A-10 Intelligent Camera with the bundled IMPACT Software Suite delivers all the power of advanced inspection capabilities in a vision sensor profile. The IMPACT Software Suite's three modules - IMPACT KickStart, Vision Program Manager, and Control Panel Manager - allow for quick setup, storage and viewing of captured images through the entire application, even as inspection requirements change.

Enterprise Connector in Proficy Plant Applications integrated suite of Production Management Solutions enables the mapping of external Business Systems requests to/from the Proficy Information Architecture. The information from manufacturing facilities is now available to the business to make more rapid, informed, business decisions.

VARIOSUB plug connector family has expanded to include connection systems for industrial Firewire, USB and SC RJ (fiber optics). These new additions enable cabling and connection solutions to reach the factory floor, providing new data connection options for device and machine builders.

The Shaft Motor is a direct drive linear servomotor driven by magnetic circuits consisting only of permanent magnets and coils. The Shaft Motor is quiet due to the absence of friction since the only mechanical contact section is the linear guide. The coreless construction of the Shaft Motor totally eliminates cogging. The Shaft Motor's high resolution (0.14 nanometers) means that it is ideal for precision positioning.

SBC86808 Mini-ITX board comes with a mainstream LGA775 package for Intel Pentium 4 and Celeron D processors with a 533/800MHz front side bus (FSB) and integrated Intel 915GV+ICH*6 Express chipset and built-in PCI-Express expansion interface. The board is a cost-effective solution for Digital Security Surveillance (DSS) high bandwidth applications.

The CompactMAX CPU7.2 is available with Intel Pentium M and Celeron M processors. It comes with Linux installed on a CompactFlash and completely configured for the respective CPU7.2 system, plus Comprehensive Board Support Packages.

GE-Series cameras comply with the GigE Vision standard. Although GigE Vision is a brand new standard, Prosilica GE-Series cameras are already being used in applications including manufacturing inspection, print inspection, public security, undersea imaging, and aerospace.

OxyBalance provides oxygen (O2) data that helps operators set ideal fuel-to-air ratios and effectively balance individual burners or sets of burners. It graphically displays up to eight autonomous O2 measurements, and provides variable time-scale trends for each probe value.

2006-2007 Machine Safety Products catalog has more than 300 full-color pages of safety products, including additions to the EZ-SCREEN Series safety light screens and PICO-GUARD fiber optic safety systems. The body of the catalog is organized into seven easy-to-read parts that are packed with detailed information: Safety Light Screens, Two-Hand Control Modules, Safety Modules, Safety Interlock Switches, Emergency Stop Devices, Accessories and Reference.

The handheld FBT-6 Fieldbus Diagnostics Monitor device monitors a live fieldbus network without interfering with its operation. Features include noise measurements in 3 bands, monitoring of signal level for all devices, monitoring of signal to shield faults, network retransmissions and the ability to download data to a PC via a USB port.

Automated test engineers can use the PXI and SCXI RF multiplexing switch modules to route signals ranging from DC to 5 GHz. These modules are ideal for accurate RF signal routing in telecommunications, military/aerospace and automated test applications.

Designed for safely conveying virtually all types of materials, IC Series of vacuum conveyors is ideal for transporting flakes, pellets, and powders in a variety of applications, such as painting, textile coloring, water purification, rubber mixing, and tile molding. The IC Series consumes less energy than any other compressed-air driven technology on the market today.

Ultra-Lock System for the connection of sensors and control devices features unthreaded stainless steel connectors, IP69K, and "push-to-lock" technology for faster, easier and more secure connections. The M12-compatible Ultra-Lock System is comprised of a series of integrated distribution boxes and cordsets built on push-to-lock technology, which enables fast, easy installation without turning the coupler.

Series AS3 Air Service system has a modular construction and is comprised of filters, regulators, lubricators, and accessory devices such as shut-off valves and distribution blocks. With a width of 63 mm, an AS3 regulator provides a high flow rate of 184 SCFM. The AS3 compressed air preparation system is offered with 3/8” and ½” NPT, and G3/8 and G1/2 ports with a pressure range of 232 psi and can be used at temperatures between +14° to +122°F.

Fisher Type i2P-100 electro-pneumatic transducer converts milliamp input signals to a switch-selectable proportional pneumatic output signal for lower pneumatic supply consumption and reduced operating costs. The transducer has ATEX certification for Intrinsic Safety (Zone EEx ia IIC T3/T4/T5, Flameproof (Zone EEx d IIC T5/T6) and Type N (Zone EEx nC IIC T5/T6).

The ASI Industrial Ethernet Switch brochure covers the new line which includes 5 and 8 port managed or unmanaged versions with optional fiber capability. The new Industrial Ethernet Switches have been designed to meet the demanding specifications of the industrial automation and transportation markets. The brochure also features related products and accessories including Compact Power Supplies, Connector Interface Module, End Stops and DIN rails.

The lightweight version of Triflex R multi-axis cable carrier is designed for use on automated robots and employs a ball-and-socket style design. Triflex R Light provides a low-cost alternative for robotic applications that don't require a completely enclosed cable management system.

Series 3400 Pulse/Pattern Generators provide signal quality and precise control for pulse widths from three nanoseconds to 1000 seconds, as well as a simple, intuitive user interface. Series 3400 pulse and pattern generators are ideal for semiconductor device and material research and characterization, as well as in process integration and advanced materials research applied to such projects as nanotechnology in R&D labs and technology development labs.

Measurement Studio 8 suite of class libraries and controls is for acquiring, analyzing and presenting data in applications built using Microsoft Visual Studio. Now with scientific Web controls for ASP.NET, the upgrade gives engineers the power to create Web pages that can be viewed with any browser or operating system for remote monitoring and control of their test and measurement applications.

Available in the 3kVA to 10 kVA power range, the new Allen-Bradley 1609-P provides battery backup power to critical devices in the control scheme. It offers extremely tight voltage and frequency regulation, internal bypass, and input power factor correction to minimize downtime and ease disruption to equipment.

AIS 3100 to meets the international need for an off-the-shelf UPS that is preconfigured with three-phase input power and single-phase output power. This design accommodates three-phase power available in factories while providing the single-phase power needed to run industrial computers, manufacturing controls, PLCs and various systems on the factory floor. It eliminates the need for external transformers.

The AMIS-49200 is a physical interface between the bus wiring and the actual measurement device. It meets the specifications of the IEC-61158-2, H1 (ISA-SP50.02-1992), and EN 50170 physical layer standard, including Foundation Fieldbus H1 and Profibus PA protocols.

P4 OMNI P4 BCR now read dot-peen bar codes. Made by creating a permanent indent, or dot, in the surface of any malleable material, dot-peen bar codes are frequently used in the automotive and aerospace industries and for government UID applications.

FPM-3120G color TFT LCD flat panel monitor is for industrial or commercial applications. Its display is a SVGA TFT LCD with high luminance of up to 350cd/m2. The LCD backlight has a life expectancy of 50,000 hours. The front panel is made of aluminum, NEMA4/IP65 compliant, and the hard anodic coating protects the panel from abrasion and acid corrosion. The direct-VGA signal transmission allows a regular VGA control card to be used.

The MT5200 is designed for level measurement in bulk solids applications. A concentric waveguide directs the radar beam, alleviating divergence problems and echoes in tanks with narrow openings. Unaffected by dust or feed flow, the MT5200 accurately measures materials with dielectric constants as low as 1.3.

The SCM5B48 provides excitation to piezoelectric sensors with built-in microelectronic amplifiers. The module provides a constant current excitation to the sensor, then isolates, filters, and amplifies the sensor output, yielding a high-level analog voltage output. The excitation current, signal gain, and filter high-pass and low-pass cutoff frequencies are field-configurable through a set of slide switches.

Version 3.07 includes several enhancements, including: Profibus-DP interfaces; HMI enhancements for trending and control; Context sensitive menus; improved addressability and access to Foundation Fieldbus devices; system integration OPC client station with 100,000 tag capability; sequence of events management integrated with the system; and more.

Industrial Serial to Ethernet Device Servers (Models ET-DS-1 and ET-SDS-1) are ideal for connecting serial-based software applications over Ethernet to remote industrial serial devices. These device servers are easy to use and at the same time are extremely flexible, offering the latest in advanced IP technology. Use the supplied Quick Configurator for fast setup or the powerful Device Manager for more advanced configurations.

Built on the latest digital video technology, the SiBreak DVR System provides advanced monitoring and sheet break analysis of paper and tissue machines and converting operations. This innovative system offers an immediate return on investment by continuously recording events that can cause machine problems, poor quality and sheet breaks.

The MR314 encoder works in a wide range of harsh and/or hazardous environments, incluidng temperatures of -60°C/+150°C). It is intrinsically safe and ATEX-compliant, immune to EMI/RFI and ground loops, unaffected by high magnetic fields, and radiation resistant. Special versions can be easily engineered for thermal-vac environments.

PANEL6173 has a 17-inch high brightness SXGA LCD display, NEMA4/IP65 compliant front bezel, and an ultra slim design. The TFT LCD offers great luminance at 300cd/m² and has a contrast ratio of 500:1. The industrial flat panel monitor is especially suited for the POI/KIOSK market and HMI (Human Machine Interface) solutions.

The mass memory media are extremely robust and can be obtained in the industrial grade version with 64 MB to 4 GB memory capacity. All data, ranging from the operating system to the application and data records, are stored there. If separate areas for application and data are required on the mass media, this is done with a combination of two CompactFlash cards.

The MBT Multifunction Block Timer enables users to reduce their component inventories by stocking one timer for a variety of mobile, industrial and automation applications. At just 77mm x 51mm x 13mm in size, the MBT is a full featured all-in-one timer featuring 12 modes of operation and a multitude of logic function possibilities.

Bristol ControlWave ExpressPAC is a highly integrated pre-engineered package solution that combines the new ControlWave Express RTU with a variety of options commonly required in SCADA applications. ControlWave combines the best technologies provided by PLC, RTU and automation architectures into a Hybrid system well suited to remote applications in the energy, water, and wastewater industries.

Utilizing a single wireless link, MDS NETio carries payload data from serial and IP devices along with the analog and discrete signals. It also supports direct protocol addressability of connected I/O from a library of industrial protocols, including MODBUS RTU, DF1, MODBUS TCP, DNP3 or EtherNet/IP.

TCI's Analyzer software provides accurate estimations of current and voltage harmonic distortion under varying supply and filtering conditions. Compliance indicators let you know if your project meets IEEE 519-1992 standards. You'll also have the ability to display a representation of Table 10.3 of IEEE 519-1992, from the menu and button bar.

JetNet 3705 supports 802.3af Power Over Ethernet technology that enables network devices to be powered over the network-cabling infrastructure. With 15.4W full power delivery for each of the 4 PoE ports, JetNet 3705 removes the need for separate power and data-cable infrastructure and costly AC outlets near cameras. Furthermore, it allows the removal of the electricians from the installation team.

The EC-S2 individually monitors one or two read heads to provide a category 4 system. The unit may be combined with an EC-S4 Control Unit to guard applications with up to six doors while continuing to satisfy category 4 requirements according to EN954-1. These units are CE marked, BG approved, and UL and C-UL listed.

The EZ 5015 spring cage contact power connector requires no special skills or tools. Only a standard screwdriver is needed to fit the cable onto the connector. After having stripped the wire, a simple three-step process is carried out: insertion of the screw driver (as shown in the diagram), followed by the wire and the removal of the screw driver to create a secure connection.

The M18T analog output model senses whether the object is warmer or colder than its surrounding—even when the difference is only 3° C and even if the object is stationary. The self-contained sensor requires no controller to operate, and its TEACH function allows the user to program two distinct temperature switchpoints for an output that automatically scales over a positive or negative slope.

C80 Series Airbleed Priming Valves automatically open to allow F/G-20 through D/G-12 Series Hydra-Cell pumps to self-prime by quickly relieving the system of trapped vapors or air rather than compressing the gas and causing pump airlock. The valves then automatically close to provide immediate full system pressure.

HOLOCON, an IEC 61499 - compliant highly distributed controller, brings true, masterless-control right down to the machine level following international standards for interoperability.

MDS NETio, an integrated, scalable, family of I/O and wireless communications products, enables the extension and regeneration of I/O signals while reducing complexity, wiring, and termination costs. Integration complexity is significantly reduced, because the NETio consolidates I/O with an MDS radio.

The PD41 bar code printer is housed in a rugged metal case. It offers high-speed, multi-channel Ethernet as a standard configuration, in addition to serial, parallel and USB connectivity. It also offers many Smart Printing features normally found only in high-performance printers.

Alarm MOCCA version 2.1 eliminates the need for onerous change management procedures by automatically tracking changes made to the Distributed Control System (DCS). Alarm MOCCA simplifies DCS integrity assessment by empowering users to not only validate every parameter, but also validate whether configuration guidelines are being followed.

ACB-MP+4.PCI, a four-port PCI bus RS-232 synchronous serial interface, is an ideal solution for military, satellite, radar, banking, and other applications that require robust synchronous communications. For maximum flexibility, each of the serial ports can be individually configured for RS-232, RS-422, or RS-485 communications.

Endurance Technology innovations for BC Series of pneumatic band cylinders assures that every Band Cylinder is designed for long life in the most demanding applications. Four complete lines of rodless band cylinders, including the BC4, BC2, BC3 and BC3D, deliver peak performance for a range of industrial load requirements.

AutoManager products and related industry-focused business applications will enable immediate deployment of both existing and new AutoCAD data and other technical documentation throughout the enterprise to streamline operations, reduce errors and aid decision-making.

With the conveyor running only when needed, it becomes even more cost effective with the HTBL ZPA DriveControl on a per zone basis versus both existing mechanical methods and other competitive motorized driven roller solutions. The HTBL ZPA DriveControl module is easy to install with no external control of programmable logic control (PLC) required. However, it does allow the use of an external controller or PLC to enable integration into any existing control scheme. It interfaces with both PNP and NPN style photo eyes.

ADAM-4150 and 4168 modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. The ADAM-4150 includes seven input channels and eight output channels with over current/short circuit protection. The ADAM-4168 has eight form A output channels.

The UVX-300G-REM has a remote sensing head that is easily mounted and measures just 0.7x0.8x1.2 inches, a volume of less than 0.7 cubic inches – 87% smaller than previously available UV sensors of this type. The 87% size reduction, achieved via remote sensing, allows the sensor head to be positioned near rollers and spray nozzles where others will not fit, while its long detection range allows positioning away from debris contamination and physical damage.

The Utilibox Style A plastic enclosure measures 6.10-in. long x 4.60-in. wide x 1.37-in. high. Internal dimensions are 5.84-in. x 4.34-in. x 1.17-in. It is ideal for housing switches, controls and alarm systems. The enclosure comes in flanged and unflanged styles, weighing 6.3 oz and 5.9 oz, respectively.

The Inside-Outlet GFCI combines an external and an internal control panel GFCI receptacle into one assembly. This increases safety and saves time by making the GFCI TEST/RESET functions available to maintenance personnel from the outside of the control panel. By installing an external Inside-Outlet™, a separate internal utility receptacle no longer needs to wired inside the panel.

PXI chassis and controllers based on PCI Express signaling, delivering up to 1 GB/s per-slot dedicated bandwidth. Engineers can use the PXI Express chassis and controllers to improve performance for PXI systems and integrate high-bandwidth PXI Express modules as they become available.

Magellan family of motion control ICs have automatic machine monitoring capability for recording and reacting to performance and safety-related conditions. These programmable motion chips offer users the ability to define and initiate motion-related actions such as smooth stop, abrupt stop, or system disable upon occurrence of user-defined conditions.

AlphaWave radio modems are designed for SCADA systems where robustness and reliability are paramount. The AW400 and AW435TM have been approved and licensed by the relevant statutory bodies FCC and CE. These two Transceiver units are complimented by a low power Receive only OEM version, the AW400Rx and a 1Watt Transceiver OEM version, the AW400Tx.

The Data Station Plus is a multiple protocol converter, a system data logger, and a web interface for industrial and M2M applications. The Data Station Plus converts numerous protocols simultaneously, allowing seamless communication between disparate devices, and can save collected data in CSV files that are easily viewed by programs such as Microsoft Excel and Access.

DSS.4 double level knife disconnect terminal block for mounting onto a DIN rail has a feed-through connection on the bottom level and a knife disconnect on the upper level, making it suitable for control loops. Typically in a control loop or similar circuit it is necessary to open up one side of the circuit to conduct tests; the DSS.4 facilitates this necessity.

WTL 4/2 STB Disconnect Test terminal block makes it possible to open the busbar in the terminal and for the adapter to make contact with a single action. This make-before-break design assures continuous operation of the circuit during the test procedure. With the WTL 4/2 STB, the order in which disconnect and contact is made is simply determined by the length of the color-coded plastic lug on the test adapters.

Version 1.2 of Datastick Spectrum software for PDA and desktop PCs provide enhanced display of high frequencies and faster operation during vibration collection and analysis. With Datastick Reporting System for VSA version 1.2, users can now magnify the display of any time span or frequency span and can automatically detect spectrum peaks within any selected span.

two new higher-powered additions to the Compax3 family of industrial high-performance, all-digital servo drives increase current output to 10A and 15A RMS. A total of eight distinct power levels are now available ranging from 300W up to 20kW of continuous motor shaft power.

The Promi-ESD is an embedded Bluetooth serial module for users who need to embed Bluetooth connectivity directly onto the circuit boards of RS232 based equipment like security systems, POS, industrial machinery, and medical devices. It can be connected to the device via built-in UART interface and communicate with other Bluetooth enabled devices such as mobile phones, handheld computers and laptops.

Specifically designed for material handling applications, Interroll belt drives are completely enclosed and sealed inside a steel shell, preventing environmental conditions such as water, dust, grit, chemicals, grease and oil from affecting the performance of the belt drive. Also, because the drive unit and bearings are mounted within the protective shell, the belt drive takes up less room than a conventional drive with significant noise reduction.

AR-B1831 EPIC Single Board Computer Supports Intel Pentium-M and Intel Celeron-M Processors. It is equipped with Intel 855GME with ICH4 companion chip, giving you the excellent embedded solution requiring extremely high-performance x86-based processing.

The ID PAL Labeling Tool is a handheld label printer designed for industrial labeling applications including: wire and cable marking, patch panels, control panel and component marking, workstation labels, maintenance and engineering, electrical data communications, field service and installation, storerooms and tool cribs, construction, laboratories, and asset and general identification.

HMS will complement its family of interchangeable Anybus communications modules with embedded interfaces for PROFINET with IRT. The PROFINET Real Time communication interface from HMS just passed certification and is among the first certified PROFINET devices worldwide. PROFINET with IRT will be the latest contribution to the Anybus® family.

The C3700 Series is available in 9 standard DC input voltage ranges from 10-800VDC as well as AC input voltage ranges of 185-264 and 93-138 / 185-264 (switchable) VAC. 3 Phase AC input voltages of 3 x 208VAC (160-230), 3 x 400VAC (320-460) and 3 x 480VAC (400-530) are also available. The units are packaged in a 6U x 28TE x 226mm Eurorack module for space savings and incorporate DIN 41612 H15 I/O connectors.

RockStar rectangular connectors have a die-cast aluminum housing with a stainless-steel locking system as standard, a high-quality multi-layered surface sealing, and laser-etched identification marking. With these standard features, the housings are suitable for corrosive environments and are ideal for industrial applications.

CleanMark on-demand label printing solutions are certified for cleanroom usage. They feature quick and easy printing of barcodes, text, numbers, and graphic images; printing up to 6 inches per second; wide variety of media sizes and types; wide range of supported barcode types, including linear and 2D; thermal transfer and direct thermal printing; and easy-to-use barcode software