Industry Products

The MLSR192K-16A operates from an 8.3 to 14 VDC input, producing a single tightly regulated output at up to 16A. The output can be adjusted over a range of 0.7525V to 5.0V.

The Liquiphant FTL51B can be used in storage tanks, containers, and pipes for point level detection of all types of liquids. The instrument’s vibronic sensor is not affected by changing media properties, flow, turbulence, gas bubbles, foam, vibration, or build-up.

Part of the PowerPac portfolio of RobotStudio, the 3D Printing feature eliminates manual programming to allow prototype production. The 3D Printing PowerPac supports a variety of processes, such as welding and printing with granules or concrete and is ideal for low-volume, high-mix printing.

These devices have been certified in compliance with IECEx and ATEX directives and are suitable for use in mines, oil and gas facilities, agricultural applications, chemical plants, woodworking factories and milling operations.

The circuit breakers, also known as motor-protective switching devices, can be mounted on Allen-Bradley 100-C or 100-K contactors to create a two-component motor starter. The devices provide magnetic short-circuit protection and thermal-overload protection up to 32 A, and interrupting ratings up to 100 kA at 400 V.

At 2 inches wide and 3 inches high (40 sq. cm), the HI 6200 series are designed for machine level integration in process skids or manufacturing equipment. A color TFT display provides operations and measurements and instrument status.

The enclosures provide IP65 degree of protection when coupled and locked through the locking levers so they can be installed both indoor and outdoor regardless of weather conditions. The range of operating ambient temperature is -40°C ~ +125 °C.

The MPLAB XC functional compilers certified by TÜV SÜD aid in satisfying the verification and validation requirements specified in the ISO 26262 standard for automotive safety, IEC 61508 for industrial applications, IEC 62304 for medical software and IEC60730 for automatic electric controls.

Existing display options include analog process signals, load cell, or potentiometer inputs, and temperature inputs in either °F or °C from RTDs or thermocouples. All panels offer selectable decimal point location.

The FWM7RAZ01 supports IF (I/Q) output signals from 1Hz to 1 MHz enabling it to detect movement speeds from 6mm-per-second to 6km-per-second, within a 30-meter range.

Deploy ensures all manufacturing activities remain accurate with the most up to date software versions installed on systems throughout smart facilities.

Based on photoelectric Micromote technology, it features an LED sensor in a sensor head measuring 2.4 x 1.5 x 7 mm. Especially designed for use with thin end effectors, it features a controlled and focused light spot, allowing it to detect wafers a few μm thick.

The CD Series is designed for applications in machines, status indication, automation, controls, and aircraft instruments.

Equipped with three signal options, eight different operating modes, and a signaling area of up to 1350 feet, the PMF LED-Hi offers day/night reduction, individually switchable sectors and inrush current limitation.

More than a searchable database of over 10,000 WAGO products, Version 4.0 offers added features including expanded functionality of the "Smart Designer" for custom rail assemblies. This advanced design tool saves design time by calculating the rail length, identifying errors in the design and automatically correcting them. Completed drawings can be exported to any CAD programs or into a data file. The software also provides customers with a bill of materials according to the drawings, and in numerical order, making purchasing easier.

Free Guide Features Incremental and Absolute Encoders

The FGS Stand Alone is a single FGS unit setup to guard an area that can't be entered from another direction. The device must be mounted so that the user can not reach over, reach under or stand behind the defensive fields.

Automationdirect now offers their own Centsable brand of contactors in IEC sizes Sizes A through F with a manual starter / protector now available to make a motor starter.

Request AutomationDirect's FREE DirectSOFT32 and C-more Demo CD. It will give you the chance to try their software to see if it will fit your PLC or operator interface applications.

ImageVision Modular Consoles are all steel and built for the industrial environment. They can be gasketed to provide protection against grit and dirt. Optional sub-panels and custom cut-outs allow you the flexibility to install devices in either the 1st or 2nd tier. We customize to fit your application!

A new standard for useable information and technical completeness, while providing significant new data and conclusions on one of the “workhorses” of flow measurement. If you manufacture, sell, specify, or use full-bore magnetic flowmeters, this study is a “must have” for you.

DVT's Series 500 SmartImage sensor is a stand-alone imaging sensor with on-board image acquisition, processing, digital I/O, and serial and Ethernet communications. All this is contained within a small 1.6" x 2.2" x 4" footprint.

Grace Engineered Products has certified its products to comply with the CE safety specification...

Designing control systems just got easier. With new PANELdraw™ software from Hoffman®, you can create panel and enclosure layout drawings, quickly and precisely. This AutoCAD® add-on tool has an easy-to-use process for Bill of Material generation, documentation reporting, panel selection and drawing.

Grace Engineered Products has introduced an interface for the Allen-Bradley MicroLogix 1200 processor.

Grace Engineered Products announces two new Convenience interfaces for Allen-Bradley ControlNet (AB 1203-CN1) and Enhanced DeviceNet (AB 1203-GU6)

The brushless voice coil motors provide 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force.

AutomationDirect's GS AC drives were designed with simplicity and robustness in mind. We worked hard to make these drives the easiest to use in the industry. The GS series was specifically designed to be able to handle the higher range of American voltages.

Cut your PLC wiring time down to minutes instead of hours! The ZIPLink system eliminates the normally tedious process of wiring PLC I/O to terminal blocks. Simply plug one end of a ZIPLink cable into a DirectLOGIC I/O module and the other end into a ZIPLink connector module. It’s that easy! ZIPLinks use half the space, at a fraction of the total cost of terminal blocks.

Designing a pushbutton that will satisfy NEMA requirements while maintaining the value you've come to expect from AutomationDirect is not an easy task. We took advantage of the experience of Cutler-Hammer engineering to take existing product technology and make it better. We proudly carry the HT800 line of 30 mm pilot devices from Cutler-Hammer.

The DirectLOGIC 06 (DL06) programmable logic controller (PLC) is our first micro PLC to combine its fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. With the DL06 micro PLC, you can use the same PLC panel layout for all applications from 36 to 100 I/O.

The WinPLC is a revolutionary product that brings the best of the PC controls and the PLC world to a common platform.

The DL105 series is a fixed-I/O micro PLC with 10 inputs and eight outputs. Eight configurations are available in combinations of AC, DC, and relay I/O, as well as AC and DC power supplies.

The DL05 and the DL06 product lines are a family of micro PLCs designed to fit more applications than any other PLC family in their class. Starting with the DL05 at 8 inputs/ 6 outputs, all the way up to the fully expanded 100 I/O DL06 PLC, these PLCs are a standard that can grow with the changing needs of your machine or process control applications.

AutomationDirect offers a full line of operator consoles and consolets designed to house electrical and electronic controls, instruments, push-buttons, pilot light and operator interface systems.

If your application requires the flexibility of a modular control system, a DL205 PLC is the lowest cost, most versatile solution you'll find. In fact, all you need to do is pick out a CPU, plug it in the first slot of the base you choose, and then mix and match various modules into the available slots.

AutomationDirect's Terminator I/O line of field bus termination I/O products, a practical solution for remote I/O, PC-based control and distributed control applications.

DINnectors are simply DIN rail-mounted connectors or terminal blocks. They provide a means of connecting and identifying two or more wires within the demands of an industrial environment. DINnectors can terminate solid or stranded wires ranging from 18-3/0 AWG, and offer fusing, grounding or disconnecting capability within the terminal block itself.

This product line has the widest variety of I/O modules and configurations of all our PLCs. You can build a control system with local/distributed I/O of up to 3,500 points. Use the built-in PID instruction or specialty modules to perform cost-effective process control. Three CPUs from 6.5 K memory with 1,152 I/O to 30.8 K memory with 3,584 possible I/O, with built-in power supply are offered.

Would you like to get real-time PLC information directly into Excel™, Lotus™, Visual Basic™ and many other Windows® application programs that you use every day...faster than you ever imagined?

LookoutDirect is a PC-based Human Machine Interface (HMI) software package. It comes from National Instruments(based on their Lookout® object-based automation software). LookoutDirect does everything you need an HMI to do, at half the price charged by most of our competitors.

AutomationDirect offers electromechanical motor control solutions for motors up to 40 horsepower at 480 volts.

AutomationDirect carries Cutler-Hammer E26 Series Stacklights which come in preassembled 2 or 3-light units, or put together a stack of your own with five colors and alarm and strobe modules.

AutomationDirect offer hundreds of different NEMA cabinet enclosures, including junction boxes, wiring troughs, wall mount and free standing...all at AutomationDirect's low prices!

Grace Engineered Products announces the GracePort™ “M5 Series” line of Stainless Steel Interfaces specifically suited for the Drug, Food Processing, Dairy, Chemical and Petro-Chemical Industry.

The MS-880 is the ideal scanner for facilities looking to simplify equipment purchase by selecting one scanner model throughout the floor for a variety of uses.

Quadrus EZ™ simplifies 2D reading. Fully featured to read linear bar codes or 2D symbologies in static or dynamic applications, it is ideal for any company considering the transition from bar codes to 2D symbols.

Designed for embedded applications, the MS-3 series meets demanding space and budget requirements while offering an exceptional feature-set. The MS-3 series are the fastest, smallest bar code scanners available.

Improve product and data tracking within a single manufacturing line or throughout and entire supply chain. Omron’s advance Auto Identification solutions offer the durability and advanced function you need.

All sizes of NITRA rodless cylinders have magnetic pistons and are double-acting. The cylinders have front and rear adjustable cushions and tapped end caps for mounting.

The integrated tool “surface OCR” recognizes and extracts character strings from surfaces. For that it uses either the scan data of the 3D-height map or the 2D intensity data.

The KX-2 collaborative robot is designed to meet a need in the market for capable robotics accessible to laboratories of all sizes. The KX-2 robot provides automation, combining reach and 360-degree rotation on the shoulder and wrist axes with radial compactness.

The P2102 is a fanless, embedded computer with the P2102E. Supporting Cincoze’s modular design, the P2100 Series can also work as a panel PC when combined with various Cincoze display modules.

Electra Cloud allows users to collaborate on their drawings with team members located anywhere in the world in real-time, with a browser and no additional software required.

The EC-7100 platform combines the computing power of the NVIDIA’s MXM GPU hardware accelerator and the 7th Generation Intel Core processor family to leverage streaming data for artificial intelligence-driven applications in the transportation, automation and retail industries.

WEG SSW05 and SSW07 soft starters are fully digital soft starters with DSP (Digital Signal Processor) controller designed for motor starts and stops. The Gen 2 WEG CFW100 VFD drive is a single-phase input (110/230 VAC), three-phase output variable frequency drive developed for applications ranging from 1/4 to 1hp (0.18 to 0.75 kW).

The linear axis uses a H2W brushless linear motor BLDM-C08 to generate a continuous force of 26 lb [115.5 N] and a peak force of 78 lb [347 N] with a stroke length of 30 in [768 mm].

The PROGENY system provides plasma treatment at 13.56 MHz and accommodates all the common gases, like oxygen, nitrogen, and argon, with high process reproducibility and uniformity.

The VFD-SC series is the same cable as the standard VFD-C series; the addition of the shielded 16AWG signal pair allows the cable to be used with motors and drives requiring brake control or feedback from devices like temperature or position sensors.

EXAIR’s Gen4 Two Outlet Selectable Voltage Power Supply allows users to choose input voltages of 115VAC or 230VAC. Two 5kV stainless steel output connectors can energize two static eliminators.

The SPECTROMAXx is an OES line with more than 13,000 installations. The newest generation instrument features a more intelligent elemental analysis of incoming source materials, for in-process testing and traceability, and for final quality inspection.

The Plantweb Insight Inline Corrosion application delivers field data from Roxar wireless corrosion transmitters, providing insight into instrument health and process corrosivity.

The Eclipse is suitable for critical applications for liquid and gas delivery, medical, analytical and industrial automation requiring fine resolution and repeatability. In addition, the design allows for custom flow profiles.

These DC-powered (10-30V or 15-30V) threaded-barrel sensors are IP67 rated and are available with 2m pigtail cable or quick-disconnect.

FX-3420 can support up to 768GB of memory, through multiple DDR4 2,666 MHz REG DIMM modules and comes with 12x SATA 3.5” hot-swappable disk drive bays.

The pitch stage has cross roller guides and a range of travel of +/- 10 degrees. The maximum speed is 14 degrees per second with stepper motor driven version and 90 degrees per second with the servo motor driven versions. The 65 mm x 65 mm table has a pattern of threaded holes for fixtures or tooling and has an accuracy of 0.05degrees and repeatability of +/- 0.01degrees.

Capabilities let users fine tune scaling of I/O signals, adjust excitation levels, and calibrate the bridge. Universal output supports six ranges including 4-20mA, 0-10V and ±10V. Flexible power accepts a 9-32V DC supply at the terminals and a rail power bus option can supply multiple units from a single connection or establish redundant power.

For manufacturers, the IP67 protection rating will enable the robot to be used in applications generating substantial dust, water and debris including 3C polishing, wet grinding, buffing and deburring.