Industry Products

IaaS is offered with two Rockwell Automation pre-engineered network solutions, including the Industrial Data Center (IDC) and the Industrial Network Distribution Solution (INDS). These solutions are designed for industrial use and incorporate technologies from Rockwell Automation Strategic Alliance partners Cisco, Panduit and Microsoft.

This thermal imager is especially designed for the glass industry and used for real-time temperature monitoring in production, finishing and further processing of glass sheets, bottles, displays and other glass products.

The release is designed to complement and enhance the uncertainty analysis delivered by Ensemble Smoother Based History Matching, previously introduced in the Tempest 8.0 release, and provides a means of representing flow behavior in the vicinity of fractures.

The Sensepoint XRL fixed gas detector monitors industrial operations for specific hazardous gases, such as carbon monoxide or methane. Sensepoint XRL is Bluetooth-enabled, meaning it can be set up and maintained remotely using a smartphone app.

The MT8103iE HMI solution provides a Wi-Fi communication link that is compliant with the 802.11b/g/n wireless communication standard and therefore offers a connection via WPA-PSK/WPA2-PSK, allowing the HMI to collect and send data in a safe and secure protocol.

AECOsim Building Designer CONNECT Edition is a building information modeling (BIM) application designed for building projects of significant size and/or engineering complexity, and which are typically characterized by the challenges of combining vertical construction and horizontal infrastructure (like roads, railways, utilities, etc.).

The SLDM modules fit into small spaces (2.8mm high). They can be mounted in areas on the top side where ultra-low profile is required either due to airflow impeding issues or mechanical interference issues, or they can be mounted on the PCB bottom side to save top side real estate.

The Y-Flow YFFC is a computer designed to measure AGA 3 orifice gas flow and the Y-Flow YRTU is a remote terminal unit designed to measure various complex AGA gas flow calculations as well as remote control applications.

Pendant Armor protects robotic teach pendants from damage in manufacturing environments. Santoprene bumpers, screen protection and other accessories to keep your robotic pendant operational.

The EPIC-BT07W2 comes with a fanless solution like the rest of AAEON’s EPIC line, and provides environmental resilience with its design, which is specifically built to combat harsh environments, operating at peak efficiency in both cold and hot spaces.

Applications include textile machinery, packaging machinery, sheet metal machinery, medical applications, marine, mobile engine management systems, industrial trucks, construction machinery, agricultural and forestry machinery.

GS4 drives are available up to 300hp in 460V models, up to 100hp in 230V models. All 230V models can operate in 3-phase or single phase configurations. GS4 drives have a 100kA Short Circuit Current Rating (SCCR), a 50°C operating temperature rating, and STO (Safe Torque Off) is built in.

The GT 112-E automatic magazine bar feeder from LNS is designed for sliding headstock machines running unattended or lights-out production using small bar stock with diameters from 0.8 mm to 11 mm (12.7 mm with bar preparation).

The cMT3151 HMI, containing the addition of a built in cMT server allows the cMT3151 to act as a gateway between the plant floor and the rest of the outside world.

ML Series sensors have a ½ inch square profile. Other key specifications include models with 6, 10, 25, 50 or 100 turns, bushing mounting and sealing to IP 65. Life is >15 million turns. Linearity is to ±0.25% of full scale range. Resolution is better than 0.1% with repeatability of ≤ 0.17%.

Insight Performance is designed to empower operators with data-driven KPIs and real-time visibility into equipment performance through an interface. Built-in analysis capabilities are designed to enable cross-plant equipment benchmarking that delivers actionable intelligence to effectively increase equipment performance and operating efficiency.

The hybrid safety concept from Turck combines both safety I/O and general purpose I/O in a single, on-machine, remote I/O device. The CIP Safety module expands the existing hybrid safety offering, which already includes an option for PROFIsafe over PROFINET.

The OEM-2306, using eddy current technology, is factory configured for each unique application. The system’s board level configuration makes it ideal for integration into OEM equipment. Additionally, the OEM-2306 is RoHS compliant and supports the full line of Kaman sensors.

This design features a centered sensing element which is intended to improve accuracy of time of arrival, targeting, sniper/projectile detection systems, and aerodynamic testing in high speed wind tunnels.

The MOWI20C / MQI40C / MRWI60C are families of 20 / 40 / 60 watt DC/DC Converters featuring a 4:1 Input Range in a chassis-mount package with terminal strip connections and optional DIN Rail mounting eliminate the power board requirement in field applications.

The threat detection services take a product-agnostic approach to create a robust asset inventory across both IT and OT systems in an industrial operation.

Itris Automation decided to integrate the PLCopen coding guidelines into PLC Checker as they share PLCopen’s objective of improving the quality of PLC programs and promoting good practices.

The MLX300 enables operators to control and program Yaskawa robots in a standard PLC programming environment, eliminating the need to learn a specific robot programming language.

The HM-BLE, in combination with a Smart Device Communicator App on a mobile device is designed to become a full functioned, DD based, HART Communicator.

The T3 robot comes with a built-in controller. It offers an automation solution for simple applications such as pick and place, assembly, parts handling and dispensing in industries ranging from automotive and medical development, to lab automation, consumer electronics, electronic components and industrial.

Major application fields include primary and secondary metals manufacturing, primary glass manufacturing, and laser welding. Featuring a 0.1 °C measurement resolution, the Endurance pyrometers also fulfill the requirements of the semiconductor industry.

Imagine Instruments LLC Announces New Industrial Wireless Remote Control Transmitter/Receiver Set

The Intel Apollo Lake-based ICO300-83B comes with I/O connectivity while measuring 31 x 100 x 125 mm. The I/O interfaces include four RS-232/422/485 (two isolated RS-232/422/485 or four isolated RS-232/422/485 ports for option), four USB 3.0 ports, two Gigabit Ethernet (Intel i211AT for ICO300-83B, Intel i210IT for ICO300-83B-WT), one VGA (HDMI for option), and one 8-bit programmable female DIO connector.

With a range of up to 100 meters and typical latency of less than 200ms, this scalable IoT network can support 120 devices in 30 different rooms. By using range extenders and/or additional Gateways, this network can further scale throughout an entire facility.

These are contactless devices designed for use in factory automation or assembly machinery applications where space is a premium, as well as for external mounting on hydraulic cylinders to sense rod position.

This offering is designed to deliver mining organizations an opportunity to digitally transform their operations with accurate, real-time visibility to information across production, inventory and quality management processes.

This data-acquisition-ready kit provides a platform designed to simplify development of IIoT solutions by providing all the essentials needed to get data from edge devices to cloud services

These solutions feature Ethernet communications, LCD display, an internal battery, and offer communication options for integrated WiFi and GSM cellular modems

The Arduino MKR WAN 1300 delivers LoRa low-power WAN connectivity, and the Arduino MKR GSM 1400 adds global 2G/3G communications capability. Both of the boards feature dimensions of 67.64 x 25mm

The HTA technology packages are designed to deliver reduced measurement cycles and data sets for manufacturers looking to integrate dimensional inspection more effectively into their production processes

The AssetScan condition monitoring suite includes differential pressure monitors, level monitors and temperature monitoring solutions. The AssetScan condition monitoring suite also includes battery-powered and cellular enabled solutions.

Full implementation of HART functionality, both in the I/O system and in the TwinCAT engineering environment,is intended to promote simple project planning and reliable commissioning.

The Fluke T6 Electrical Testers with FieldSense Technology are designed to make troubleshooting safer and more efficient by allowing electricians to take simultaneous voltage and current measurements — not just detection — without test leads.

The HSR robot can be switched between floor- and ceiling-mount simply by making a change in the configuration file of the controller, with no additional hardware necessary.

The SureMotion lineup includes both motor-ready actuator assemblies and an assortment of sliding components and accessories to provide a variety of motion control solutions for X-Y and X-Y-Z positioning systems.

The c250-S is a safety controller that enables engineers to program all of the machine’s safety needs using one engineering tool based on the PLCopen standard.

Weidmuller’s WPD blocks are designed for power source distribution in low voltage applications (UL - 600V / 30 – 310 A, AC/DC) and accommodate a range of wire sizes from AWG 14 – 3/0.

From industrial winch and lift automation to allowing sports referees to control the scoreboard from the field, the FSL wearable wrist remote is truly adaptable to any need, whether industrial or domestic.

The PMP71 measures absolute and gauge pressure of gas, steam or liquid and has built-in algorithms to calculate level, volume and mass of liquids. Measuring spans are available in ranges from -6 to +6 psi up to -15 to 10,500 psi.

POS software may be enhansed with the additional technology integration. With Eltima Port Virtualization Technology you may get all data from retail devices to the single base. The technology may be integrated to the software and to the hardware. Custom development allows to make suitable product exactly for your needs.

The LNP-C500G series is designed to fulfill industrial applications that have small space requirements and need high bandwidth capabilities such as security, ITS transportation, power/utility, and water wastewater treatment plants.

This latest release increases the efficiency of remote asset management by doubling as a flow meter, as well as allowing operators to automate loop check and commissioning, reduce hard-wired input/output (I/O) devices, and extend device diagnostics.

Ideal for applications with fragile or unstable loads, the self-tracking, fully-supported belt is an designed as a solution for handling empty containers in preparation for fill lines in food and beverage operations.

Included in the 6.3 release is the Keyence KV Ethernet driver, which enables KEYENCE PLC users to connect KV series PLCs to diverse devices and software applications, including OPC clients and IoT solutions.

The Micropilot FMR6x 80 GHz device features reduced tank wall effects, less interference from obstacles, and the ability to measure lower dielectric media. The FMR6x’s process connection, as small as 3/4 inch, allows for installation in tanks with small process connections, in tall nozzles, and through ball valves.

This offering enables the incremental upgrade of the company’s legacy TotalPlant Solution (TPS) control system to allow for integration with Experion PKS.

To extend the process-optimizing advantages of the digital Coriolis flowmeter platform to low-flow applications such as batching, dosing and filling of both liquids and gases, the Sitrans FCT030 and FCT010 digital transmitters can now be paired with the Sitrans F C MASS 2100 and Sitrans FC300 Coriolis sensors for small line sizes from DI 1.5 to DN 15.

A variety of setting possibilities and functions open up a range of applications for the user. Steelworks, foundries, forging, the ceramics industry and glassworks are perfect examples of applications.

Both products include a myriad of security features supported by the Microsemi SmartFusion2 System-on-Chip (SoC) FPGA and VPX-REDI metalwork for complete physical protection.

The FTP-63GUSL001-R series combines a 24VDC 3-inch, direct-thermal printer mechanism with automatic cutter and an RS-232C/USB interface board within a panel-mount enclosure measuring 90mm (d) x 111mm (w) x 116mm (h).

With milli-second response and settling time and dynamic linearity, the new S-335’s are ideal for precision image processing and image stabilization, laser beam steering, materials processing, and lithography.

The range of Large PXI Matrix Modules (model 40-559) are 1Amp/20W switching modules, with up to 4,096 crosspoints. The matrices are available in 2, 4, or 8-slot PXI sizes and are designed for high-performance matrix requirements.

The HARTING solution is applicable in areas that are exposed to extreme harsh environments in which standard optical connectors have shown that they are not reliable

Spearheaded by IMX273 sensors from the Sony Pregius CMOS family, these Genie Nanos are designed around 1/3” CMOS image sensors that replace Sony’s soon-to-be discontinued CCD sensors.

The design of the NITRA rotary actuators is ideal for general material handling and other industrial applications such as conveying, clamping, transferring parts, positioning, and controlling valves. NITRA Pneumatic Grippers are used in a broad range of general automation processes such as pick & place, material transfer, clamping and indexing.

Moxa’s MC-1121 Series IIoT gateways deliver user device data to the cloud with support for Microsoft’s OPC UA Publisher module. These IIoT gateways include a variety of interfaces to connect to Ethernet, serial, and I/O devices, and can be used in conjunction with Microsoft Connected Device Studio.

The Protos X "Xpansion" field I/O system is a modular system consisting of a Bus Coupler and its associated input/output terminals.

With its section view function, CADbro now shows the section profile in real time. Section views can now be saved on the view manager to facilitate search and edition. Users can also save or directly export the profile to DWG/DXF, IGES and STEP files.

Designed primarily for measurements on metals and bright, shiny materials, ceramics and graphite, the Metis M323 provides measuring accuracy for low temperature measurement, regardless of target emissivity.

EDX-104 has five gigabit Ethernet ports compliant with 802.3at PoE+. It can function as Powered Device (PD) with maximum output capped at 20W for single or multiple PD device connection.

The addition of a built in cMT server is intended to allow the cMT3151 to act as a gateway between the plant floor and the rest of the outside world.

The FS10i Flow Switch/Monitor operates over a flow range in air/gas from .25 FPS to 400 SFPS [0,076 MPS to 122 MPS] and in water from 0.01 FPS to 0.5 FPS [0,003 MPS to 0,15 MPS]. Repeatability: ±0.5% of reading.

The SPI has a dial display to show the valve position locally and one or two internal switches or sensors for remote indication. The fully sealed aluminium enclosure provides a valve position signal.

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends infrared beams across the workspace.

The TS-7680 was built with industry in mind and comes equipped to handle power input allowing 8 to 40 VDC as well as 10 to 28 VAC, all housed in a plastic enclosure with optional DIN mount.

The BT3-USB-MON is a monitor-only device that combines three tools into one product: 1553 visualization and recording software; 1553 monitoring hardware; and scope outputs for electrical analysis

The S2 delivers 2D colour imaging using Episcopic and low angle diffuse RGB lighting systems that remove all specular reflections from solder fluxes and solder mask.

Offered in two strain gage designations (C5K-XX-S5198-350/33F and C5K-XX-S5198-350/39F), the Micro-Measurements S5198 pattern provides strain detection with minimized non-uniform PCA strain gradient effects, along with operation to +200°C.

These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems. They are available in NPT and SW versions, in sizes from ½” to 2”, in either forged carbon steel or forged stainless steel.

Powered by the Rockchip RK3288 ARM A17 quad-core processor, the RICO-3288 is designed to provide secure configuration, and supports 2GB DDR3L, offering quad-core processing and throughput from a form factor with standardized mounting points.