Industry Products

The LNX-1202G-10G-SFP is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

Designed for a variety of applications including asset management, data acquisition, environmental monitoring and facility management, the SeaConnect 370 originally emerged as a solution for sign monitoring and notification.

The network security platform features six Gigabit Ethernet ports using Intel i211 Ethernet controller, and one pair of LAN bypass function.

The V-731 is equipped with incremental linear encoders for direct position measurement and 3-phase electromagnetic linear motors. Fields of application include micro-assembly, biotechnology, precision laser machining, optics, lens testing, and photonics alignment.

With S-mount lens holder, the See3CAM_CU135 is a solution for Medical applications such as digital microscopy, Document Scanning cameras, Optical Character Recognition applications, smart surveillance, smart parking lot management applications, high-resolution Microscopic/Magnification applications, Drones etc.

The HART Multiplexer System by GM International is designed to offer the possibility to reduce the number of multiplexer modules, while maintaining ability to control up to 7936 channels.

RTVN version 18.0 is designed to advance the company’s vision to provide intelligent consumer-driven business networks to organizations across a range of vertical markets, including Retail, CPG, Electronics, Automotive, Defense, Pharmaceutical, Healthcare, and Logistics Services.

The ID/MV-30 includes USB connectivity, and may be plugged directly into the PC to power and go. The ID/MV-40 features Ethernet connectivity and a separate power supply.

The sensors with a cable outlet are provided with a cable suitable for E-chain use, and a semi-transparent LED ring at the sensor end, which shows the sensing state from any viewing angle. The sensors are IP67 rated, and have an operating temperature of -25 to 70 °C.

This family of serial device servers and gateways support most common industrial protocols, with various combinations of HART, HART IP, Profinet, Modbus TCP, Modbus RTU, Raw/ASCII, and EtherNet/IP.

The QF-50 is designed for optical positioning applications requiring precision and throughput coupled with long travels. It offers 400 μm closed loop and 450 μm open loop travel, 0.01% linearity, sub-nanometer resolution, and 4 nm bidirectional repeatability.

The Transport LCU, which is now available for supply, is installed inside the locomotive and serves as the controlling system for remote, wireless control movement of a locomotive through a railyard and is designed as a small space solution.

These controllers can drive up to 500A at 60V, or 300A at 96V respectively. This power capacity makes the controllers a solution for electric vehicles, material handling robots, electric boats or agricultural robots.

The Series is designed to facilitate multi-axis force, torque/axial and torsional load measurements within robotics, factory automation, machinery and tooling, agricultural and off-highway vehicle, and materials testing applications.

In the Han K32/55, the crimp contacts of the D series and D-Sub series are built into a single closed unit, allowing the connection of a maximum of 32 power contacts (10A 250V 4kV 3) and 55 signal contacts (4A 50V 4kV 3).

This 3.5” embedded SBC is a solution for IoT/M2M related applications, such as industrial automation, self-service terminals, digital signage, POS/kiosk displays, medical, and more.

The platform, for data acquisition common in machine-building applications, includes PROFINET master or slave operation, I/O configuration, and “last-breath” operation in the event of power failure.

With the TRENDview feature, operators and end users can view Single-point and Multipoint Trend Logs in a selectable list, in flexible layouts to maximize the amount of room for analog and digital data.

The device facilitates readout of flow volumes by showing liter or cubic meter measurements on a display that can be rotated for better visibility.

The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with FPGA technology for required extensive calculations.

The units are available with 3 standard travel ranges from 25 to 100mm in both open and closed-loop configurations. The closed-loop models incorporate a incremental encoder with nanometer resolution.

Hardy HI 6020 models use two core Hardy technologies: C2 electronic calibration and Integrated Technician (IT). Weighing applications include: batching/blending, filling/dispensing, level-by-weight, inventory management and product inspection.

This combination from Microchip Technology is designed to give customers the ability to increase their application’s color resolution and display size (up to 12 inches) with MCU-based resources and tools including the MPLAB Integrated Development Environment (IDE) and MPLAB Harmony software framework.

With features like megapixel cameras, integrated electronic access control, and perimeter intrusion detection with real-time central station monitoring, the systems are designed to meet the unique security demands of a manufacturing environment.

The Ex9S32 Manual Motor Starters are electro-mechanical devices that combine a number of functions in one unit, including disconnect for motor branch circuit, manual motor control, branch-circuit short circuit protection (magnetic protection), overload protection (thermal protection - Trip class 10) and switching (manual).

Up to six ECMs can be mounted on the MMS8010 3U VPX carrier, while the MMS6245 XMC can host up to four ECMs. ECMs can also be mounted on PMCs, such as the MMS5918.

NEXCOM has increased the industrial panel PC family with the addition of 15”, 15.6” and 21.5” sizes to meet the need of advanced human machine interface (HMI) terminals in automated manufacturing.

The LNX-2602G-SFP series is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh environments, such as, manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation. This switch is also designed for setting up a dedicated network for optimizing VoIP and video application.

Positioned at the heart of the company’s line scan cameras, this class of sensors enables monochrome, color, and near-infrared (NIR) imaging for document scanning, parcel sorting, glass, and wood inspection

To meet the demands of most industrial environments, the FID-11x series has a standard operating temperature range of -5° to +60°C and 3H pencil hardness.

Installed under the spark plug or head bolt for monitoring of engine performance and critical over-temperature conditions, the stem design allows for installation in high temperature areas with limited clearance.

These FDA/USDA/3-A Dairy compliant scraper seals are designed for pharmaceutical, medical, food, and dairy processing applications.

The technology fosters OT & IT collaboration for enterprise-wide protection of critical infrastructures such as power generation and distribution, water and wastewater, transportation systems and infrastructure like trains, bridges and tunnels, intelligent building management, manufacturing, oil and gas, and other applications that rely on high availability industrial automation.

This combination creates a full transceiver that can transmit and/or receive wide-bandwidth signals of up to 2 GHz of bandwidth in real time, covering spectrum from 27.5 GHz to 29.5 GHz

The LMS-180 is designed for applications where resolution and constant velocity is required, such as in optics inspection, metrology, photonics, interferometry, and semiconductor test equipment.

The SWM24 integrated steppers combine NEMA 24 step motors with a 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

The Ti450 SF6 allows utility crews to include it as a normal part of their maintenance routine, allowing them to conduct both infrared and gas inspections whenever and wherever necessary.

This ergonomically designed machine allows non-stop production for rolls up to 36” diameter and weighing up to 900 pounds. The splicer loads rolls directly from the floor without requiring any additional material handling equipment, by using a turreting roll lifting concept.

The cDAQ-9185 and cDAQ-9189 provide time synchronization with TSN to simplify and improve scalability of synchronized, distributed systems.

When installed straight out of the box, the Stratix 2500 industrial Ethernet switch can prioritize critical industrial network traffic. It also can be configured for application-specific needs.

The Honeywell Sotera platform will support connected worker offerings such as two-way communications, geo-location and automatic safety alerts to provide employers with real-time awareness of safety incidents and the ability to respond quickly if an employee is injured in a remote location.

Jabil’s InControl SaaS is a multi-tenant, intelligent digital supply chain cloud platform that provides connectivity, analytics and machine learning technologies to optimize real-time decision-making for supply chain practitioners.

The Vortab Company’s elbow flow conditioner nearly eliminates the flow meter upstream piping requirements by conditioning the flow stream into a flow regime, mimicking adequate straight run.

FCI’s ST75V Air/Gas Flow Meter offers an alternative solution for heat treating process control that provides direct mass flow measurement for accuracy, operates over a wide turn-down range and supports all common and specialty fuel gases.

The VG380 is offered in two package/interface options, VG380SA and VG380ZA. The VG380SA is a 41x48x22mm module designed for standalone applications, including built in power conditioning (compatible with power supplies from 9 – 32V), and with RS-232 / RS-422 interface.

IONI implements industry standard, torque, velocity and position controls for AC, brushless DC, brushed DC, linear servo motors and stepping motors between 2 W and 700 W power.

ATE Core Configurations deliver core mechanical, power and safety infrastructure designed to help users accelerate the design and build of automated test systems in industries ranging from semiconductor and consumer electronics to aerospace and automotive.

The NCA-1031, powered by the Intel Atom x7-E3950 or x5-E3930 processor, is a desktop form factor network appliance designed for entry-level network security, gateway or vCPE.

Perle IDS-500 PoE Industrial Managed Switches come with a PRO Feature Set to meet the needs enterprise-grade level environments where additional security and network integration functionality is required

The FS10i Flow Switch/Monitor features an air/gas sensitivity and setpoint range from 0.25 to 400 SFPS [0.076 to 122 MPS] and for water or liquids from 0.01 to 0.5 FPS [0.003 to 0.15 MPS].

The SWE440 provides an Ethernet-based system interconnect that allows single board computers, digital signal processors, graphics cards, sensor I/O cards and others to pass data at multi-Gigabit speeds

The PAC is Parker’s machine controls solution that combines PLC, HMI, and motion control functionality into a single device. Likewise, the PAC is programmed using a single integrated development environment (IDE) called Parker Automation Manager (PAM).

The Fluke 729 Automatic Pressure Calibrator is designed to simplify the calibration process by automatically generating precise test pressures, compensating for leaks, and automatically documenting the pressure calibration process to help meet compliance and regulatory requirements.

The 1.0 release of LabVIEW NXG is intended to help engineers performing benchtop measurements increase their productivity with nonprogramming workflows to acquire and iteratively analyze measurement data.

With its protocol configuration, mounting design, and interface, the SDS-3008 is a networking solution for virtually any Smart Factory application. It supports the core industrial protocols -- EtherNet/IP, PROFINET, and Modbus/TCP -- and includes built-in network monitoring and control functionality.

By wirelessly communicating with an iPad, Moku:Lab enables technicians, researchers, and students to interact with their experiment and stream data in real-time from anywhere in the lab.

This calibration verification system is designed to lower flow meter operating costs in flare gas applications aboard offshore platforms, at land-based oil/gas facilities and in petrochemical plants.

Distrix’s SDN technology, running on RAM devices, is designed to speed deployment of communication networks between industrial devices and IIoT cloud platforms, and deliver security for remote machine access.

Based on the ARM Cortex-A5 core with floating-point unit (FPU), with a 32-bit wide DDR controller that offers up to 1600MB/s of bandwidth, Matrix-710 is a choice for applications requiring computing and data processing.

Based on the QuadPod architecture from JTAG Technologies, the JT 2147/eDAK is an enhancement of JTAG ‘s current DAK interface and has been specifically designed for high-integrity ATE systems.

All models of the MPV4080S family are packaged in a 4.9 x 2.9 x 1.57 inch, encapsulated case. Each model is specified for operation over the operating temperature range of 40° C to +70°C ambient. Cooling is by free-air convection.

The solid-state operation of the Lifeline 5 cable-pull switch offers an electronic, rope-monitoring system to compensate for thermal expansion and cable sag.

The CMS-700 energy monitor and control unit can integrate up to 96 sensors, which can be displayed and processed using the built-in web server, Transmission Control Protocol/Internet Protocol (TCP/IP) or a Modbus Remote Terminal Unit (RTU).

SMAC electric grippers incorporate programmable speeds, positions and forces with data feedback. This makes them suitable for a range of positioning, measuring, and inspection applications.

With this latest release, modules are provided to expand the range of applications possible with SMARTDAC+ systems. New functions include sampling intervals as short as 1 millisecond and the control and monitoring of up to 20 loops.

Applications for the PHS series are to be found across industrial, medical and transportation markets, and specific ones include robot joint angle control, motor drive units, 3D printers, rotary angle sensors, HAVC sensors, and shift-by-wire gearshift systems.

The PIC32MK MC devices combine 32-bit processing with advanced analog peripherals such as a quad 10 MHz op amp, comparators and motor-control optimized Pulse Width Modulation (PWM) modules.

The GVC1000 is designed for a range of military and commercial applications - particularly vision computing, embedded training, 360° situational awareness and advanced digital mapping, as well as data-intensive intelligence

Designed for industrial and manufacturing applications where it’s necessary to monitor data to ensure goods don’t fall outside of acceptable parameters, the ultrahigh frequency (UHF) RFID Sensor Tags enable environmental condition monitoring throughout the shipping journey, for example, of temperature-sensitive pharmaceuticals or perishable products packed with dry ice.

QualityWorX Vision, a data management and analytics platform that harnesses machine vision image data, is intended to enable manufacturers to improve and optimize their investments in machine vision inspection.

This series is targeted at the automotive, food & beverage, packaging, and power generation industries where the application doesn’t require more extensive agency compliance.

FCI’s FLT93 Switches are ideal for applications in many demanding process industries. They also used extensively chemical processing, food/beverage, mining/milling, oil/gas, pulp/paper, pharmaceutical and more.

When many of today's devices and fieldbuses were developed, Internet, Industrie 4.0 and Big Data were still unknown. Therefore these systems lack any security features for a direct networking, such as access protection with password or signed firmwareupdates. To make existing sites „Industry 4.0-fit“ MB Connect Line and Deutschmann Automation have developed the Secure Cloud Gateway mbXLINK.

With mbNETFIX presents MB Connect Line a new firewall that has been developed for use in industrial plants. It provides protection against external attacks and fulfills the special requirements of industrial communication such as segmentation, coupling of different networks as well as the control of communication on the packet level.

The system uses Standard ATE Production IC Test Systems at DA-Integrated along with Rohde & Schwarz's R&S ZVA 67 GHz Vector Network Analyzer (VNA) to create a volume production test system capable of handling RF & millimeter wave integrated circuit devices.