The Lantech IPES-2208CA is an 8-port 10/100BaseTX + 2-port 10/100/1000T/Dual Speed SFP Combo industrial PoE switch w/8 POE 802.3at/af Injectors and Pro-Ring IIs self-recovery in less than 20ms. The SFP connection is suitable with 100M or 1000M Dual Speed. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, IGMP snooping, query and source only for multicast IP surveillance, SSH/SSL*, DDM(need to work with SFP that has diagnostic function) as well as Web Ping, CPU load monitoring, SNTP and SMTP etc.
Compliant with IEEE802.3at/af standard, the Lantech IPES-2208CA is able to feed each PoE port up to 30 Watts@48VDC providing the connected PD devices. The built-in relay contact is able to connect with alarm system and send Email,SNMP trap and Ssyslog alert in case of power or connection failure.
Lantech IPES-2208CA supports advanced PoE management including PoE detection, delay and scheduling. PoE detection can detect if the connected PD is hang up then restart the PD; PoE delay is to delay power feeding when the switch is completely booted up; PoE scheduling is to allow pre-set power feeding schedule upon routine time table.
The innovative Pro-Ring IIs self-recovery scheme can recover Ring network in less than 20ms for single ring, multi-ring and dual homing topology with only one step configuration. It also supports advanced Chain topology**. Lantech IPES-2208CA builds all the important management features required in large network like IPv6*, DHCP Client/Server, SSH/SSL*, 802.1X authentication, IGMP Query / Snooping and source only for reverse multicast flow ,advanced QoS and QinQ. It also supports Ping commands via Web to detect whether a specific device is connected for easy trouble-shooting.
The unique environmental monitoring function** allows switch detecting the voltage and temperature and current then send SNMP traps out while abnormal event is occurring.
The built-in factory reset button and watchdog design can restore all setting back to factory default and automatically reboot the switch when CPU utilization is too high.
The Lantech IPES-2208CA can support up to 8KV ESD contact per UTP port to minimize the burn down risk where the electronic static discharge is usually found. It is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory where needs PoE functionality under harsh environment. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
- Pro-Ring IIs for self-recovery ring & advanced chain** in 20ms
- Support IEEE802.3at up to 30W per port
- PoE management incl. Detection, Delay and Scheduling
- Environmental monitoring for voltage, current, temperature**
- Support Advanced SNMP including QoS,IPv6*, IGMP query & source only, QinQ, SSH/SSL*, DDM, CPU load monitorin
