Scroll down to search for more products...
Industry Products
Featured Products
-
Power CAD, Simulation & Digital Twins
Accelerate simulation, CAD, and digital twin workflows with the NVIDIA RTX PRO 6000 Blackwell Workstation Edition. Get powerful AI-enhanced performance, advanced visualization, and enterprise-ready capabilities for demanding projects. -
Precision Motion with Brother Servo Gearboxes
Compact, low-backlash servo gearboxes built to deliver precise motion, high torque density, and reliable automation performance. -
The Next Evolution in Process Control Is Here
DeltaV™ version 16.LTS Distributed Control System (DCS) builds on decades of field-proven innovation to deliver the most robust and reliable release yet. -
Connect Operations, Data, and Insights with GENESIS
Stop struggling with disconnected data. GENESIS unifies SCADA, visualization, historian, and analytics in one platform.
25,378 Products
-
FANUC Robotics introduces world’s strongest robot
M-2000iA/1200 super heavy-duty robot is able to lift parts weighing up to 1350 kg (3,000 lbs). -
KEYENCE announces CV-5000 machine vision system
The (11x) high-speed 5 Mega Pixel camera transfers ultra high-definition images (2432 x 2050 pixels) in 61.2 ms (16.3 times/sec), 11 times faster than previous models. -
KEYENCE introduces VW-6000 motion analysis video microscope
High-speed motion recording of up to 24,000 fps enables accurate filming of failures in moving targets which cannot be captured by conventional microscopes. -
Weidmuller releases WAVEPak DC/DC isolator for process applications
WAVEPak interfaces between field equipment and control systems, converting and isolating signals with accuracy that exceeds 0.1%. -
AXIOMTEK introduces VTA-7120T HMI with SCADA software
Equipped with WinPC32 Pro run-time SCADA software, the VTA-7120T can be easily connected to different types of PLCs and PC-based I/O modules. -
IFS releases EPC Toolkit for contractors in the oil & gas industry
The EPC Toolkit provides system support for all the operational processes in an EPC project, including project management, engineering, material management and job costing. -
FCI adds HART to ST98 mass flow meter
FlexMASSter ST98 is now compatible with the HART communication protocol for use in large scale process and plant automation systems. -
GF Piping releases Model 2552-3 insertion magmeter
Model 2552-3 rugged insertion flow sensor permits hot-tap access to a broad range of pipe sizes from 2 to 102 inches (DN50 to DN2550). -
Lanner announces VN-3432 32-channel digital video recorder
VN-3432 takes 32 channels of analog video and converts them to highly compressed H.264 format for storage and delivery over a network. -
Yokogawa adds DAQManager software to DAQSTATION
DAQManager Data Management Software allows users to manage and view their data via a PC. Channels recorded on different instruments and intervals can be combined in DAQManager. -
Microscan releases handheld barcode readers
HS-1 and HS-2D are for challenging applications such as 2D direct part mark reading. -
Pfannenberg releases two DTS 3000 enclosure coolers
DTS 31x5 and DTS 32x5 cooling units provide 5-7,000 and 9-12,000 Btu/h, respectively. -
Autodesk doubles Moldflow performance
Autodesk Moldflow 2010 for plastics injection molding simulation and optimization offers enhanced performance, accuracy and interoperability. -
Toshiba announces IPS-30-30-3 network video recorder
IPS-30-30-3 is pre-configured to record video surveillance images from 30 IP cameras for 30 days at 3 frames per second. -
Wilbrecht LEDCO redesigns MP500 microswitches
Improved microswitches accommodate industrial applications such as electromagnetic brakes or pressure switches that require very small differential movements to operate correctly. -
Acrosser announces AR-B5630 embedded computer board
AR-B5630 has an Intel GME965 chipset, Intel Core Duo / Core 2 Duo processor, and high speed memory DDRII 533/667/800 MHz SO-DIMM up to 2GB. -
Matrox Graphics eXpansion modules allow multiple displays
DualHead2Go DP Edition and TripleHead2Go DP Edition Graphics eXpansion Modules (GXMs) allow two and three displays, respectively, to be connected to a computer. -
Binder-USA releases 7/8" feed-through panel connector
The feed-through connector connects male and female cable connectors between the cabinet and industrial environments. -
IEI announces IOVU-430M multi-touch panel PC
Users can employ more than one finger at a time to scroll the content, resize the window, and rotate the pictures. -
Schneider Electric introduces E5600 meter for tenant billing
The meter provides revenue-accurate tenant or departmental electricity metering, making it ideal for a wide variety of commercial enterprises. -
TURCK releases A-Size powerfast connectors for high current applications
A-Size 3- and 4-pin 7/8 16UN powerfast connectors provide up to 600 Volts and 15 Amps for machine power distribution. -
Pizzato Elettrica introduces prewired limit switches
Separation between the switch body and the wired connector allows the user to change a product in the field without having to completely remove the wires. -
ASM Sensors introduces PRAS5 angular position sensor for harsh environments
PRAS5 series heavy duty, magnetic angular position sensors have a measurement range of 0-360° and IP69K enclosure rating. -
Beijer Electronics announces iX HMI software
iX works with Microsoft's .Net framework and standard Ribbons, and WPF vector-based graphics. -
Ethernet Direct announces OVS-400Q surveillance video server
OVS-400Q 4-channel IP surveillance video server has a built-in quad processor which converts analog video signals into IP video streams. -
Keithley adds Graphing Toolkit to Series 3700 multimeter
Web-browser-based graphing toolkit offers users a quick and easy way to observe measurement data vs. time as channel measurements are made. -
Microscan introduces Visionscape GigE system
Visionscape for Gigabit Ethernet networks includes machine vision software, multiple GigE cameras, and NERLITE machine vision lighting. -
Renishaw releases AM4096 programmable magnetic encoder chip
AM4096 On-Axis magnetic encoder provides 4096-counts/rev of absolute position feedback for high-speed digital motor and motion control applications. -
Saelig introduces CANminiBOX CANbus controller
CANminiBOX has an AMD Élan 133MHz SC520 processor with 128 MB internal SD-RAM and 512 MB SD-RAM CompactFlash. -
Advantech introduces two PoE switches
The 5-port 24 VDC powered EKI-2525PA and 6-port wide temperature EKI-2526PI combine a compact and rugged unmanaged Ethernet switch with Power-over-Ethernet (PoE) technology. -
Machine Automation enhances AlarmAnalyst Process Suite
In a joint development effort with Shell Oil, “Ensure Safe Production” reporting has been added to AlarmAnalyst Process Suite. -
ASI introduces colored terminal block labels
Terminal block labels are available in white, red, blue, yellow, green, and orange. -
Moxa introduces AWK-4121 IP67-rated wireless access point
Suitable for outdoor industrial wireless applications, the AWK-4121 can withstand extreme weather conditions and temperatures from -40° to 75°C. -
ProSoft Technology releases Modbus TCP/IP to PROFIBUS DPV1 Gateway
5204SE-MNET-PDPMV1 supports and integrates with Schneider Electric Modicon M340 processors. -
Adeneo announces Windows Embedded CE support package
Package supports Gumstix Overo computer-on-module series, which is based on Texas Instruments OMAP35x Application Processors. -
Audon Electronics releases LabJack U6 USB DAQ
LabJack U6 has 14 analog inputs with 16-18 bit resolution and a programmable gain amplifier, ideal for measuring real-world signals. -
AXIOMTEK introduces GOT-5100T-830 panel PC
Fanless GOT-5100T-830 has an Atom N270 1.60 GHz processor, Mobile Intel 945GSE Express chipset, and 10.4" SVGA TFT LCD. -
DAILY announces rugged RFID smart label
RFID smart label is rewriteable to allow compliance with EPC Gen 2(ISO18000-6C) standard. -
Stealth Computer releases WPC-500F rugged, waterproof PC
WPC-500F is completely water-tight, surviving liquids, chemicals, dust and dirt intrusion, meeting IP67/NEMA 6 environmental specifications. -
Honeywell releases XYR 6000 wireless valve position sensor
XYR 6000 monitors the position of the valve and sends the signal from remote or potentially dangerous areas of the plant. -
Honeywell releases Terminal Manager automation system
Terminal Manager helps process manufacturers to safely and efficiently load and unload trucks, rail cars and ships in bulk-liquid terminals. -
Parker releases PFD Factory Display system
PFD has high-definition resolution, flat-panel display and built-in networking. -
Technosoft announces ISD720 intelligent servo drive
Based on MotionChip DSP technology, ISD720 embeds motion controller, drive and PLC functionality in the same open-frame unit. -
Honeywell adds redundancy to OneWireless
OneWireless R120 has a redundant wireless system gateway that serves as a backup gateway to ensure that data is always delivered even if the main gateway malfunctions or fails. -
ARC Informatique enhances PcVue building management system
Enhancements to PcVue V8.2sp1 include the ability to incorporate AutoCAD files directly. -
Baumer introduces high speed HX cameras for machine vision
HX high-speed CMOS cameras offer frame rates up to 500 fps and resolutions greater than 1.3 megapixels at 1280 by 1024 pixels. -
MatrikonOPC offers SNMP Agent for OPC
SNMP Agent bridges the IT and process control worlds using the SNMP and OPC standards. -
Red Lion introduces PAXLT temperature panel meter
PAXLT is programmable for 14 different thermocouple and RTD inputs for simplified set up and reliable temperature monitoring and control. -
Stellar Technology introduces VLC856 compression load cells
VLC856 deliver 0.50% accuracy for ranges from 10 to 1,000 lbf and have a standard operating temperature range of -40° to 250°F. Prices start at $380. -
AIS announces Industrial Panel PC
Mounting options include open frame, panel mount bezel, and IP65/NEMA4 bezel with dust/water protection. Price: $699. -
C&K introduces RAFIX 22 FS switches
Switches are available in pushbutton, selection, key, signal lamp and emergency-stop configurations, and require only 27mm of mounting depth behind the front plate. -
Electro-Chemical Devices releases Model 2122 cooling tower control system
Model 2122 reduces waste and cost by eliminating expensive excess chemicals used to prevent corrosion, scaling and fouling. -
UEI updates UEIPAC Programmable Automation Controller
Enhancements to Version 2.0 of the UEIPAC Programmable Automation Controller include Linux, Xenomai and Eclipse IDE support. -
Emerson introduces ELITE Coriolis meters for low flow applications
The meters are available in two sizes, 2mm and 4mm nominal diameter, for flow rates of 0.07 lb/min to 12 lb/min (2 kg/h to 330kg/h). -
FCI introduces GF90 gas flow meter for landfills
GF90 measures mixed composition gases such as methane (CH4) and carbon dioxide (CO2) with traces of nitrogen, oxygen and other gases. -
Hardy adds enclosure to HI 4060 Rate Controller
HI 4060 is now available factory installed in a stainless steel (Nema 4x) enclosure. -
Honeywell introduces touchscreen interface for HC900 control system
The Honeywell 900 Control Station panel-mounted interface is available for all HC900 installations and can be retrofitted to existing, compatible systems. -
Honeywell announces Energy Management Solutions
Energy Management Solutions, a customizable portfolio of hardware, software and services, help improve energy efficiency and reduce greenhouse gas emissions. -
SICK announces W15 photoelectric sensors
W15 ignores stray background reflections, detects multi-colored/shiny objects without false trips, and provides high immunity to ambient light. -
Comark announces EnduraTC thin-client enclosure
EnduraTC supports most off the shelf Thin Clients (Wyse, Dell, HP, etc.) and can house both standard and wide 17 and 19-in. LCD monitors. -
Fluke Networks enhances JackRapid termination tool
Tool now supports PANDUIT NETKEY Category 5e and Category 6 Punchdown Jack Modules. -
Microchip Technology announces MPLAB starter kit for HMIs
MPLAB includes everything needed to develop and evaluate HMIs and intelligent sensor processing for embedded designs, at $59.98. -
ORing Announces Waterproof IES-2050-M12 Ethernet Switch
IES-2050-M12 is a waterproof managed Redundant Ring Ethernet switch with 5x10/100Base-TX ports compliant with IP-67 standard. -
Control Microsystems announces FlowStation 110 pump control
FlowStation 110 pump station controller package is for use in storm and waste water lift stations and common pump-up applications. -
SICK announces OD Value optical displacement sensors
Sensors measure targets regardless of color or reflectivity, from bright shiny objects to dark remission objects. -
TURCK releases Q25L cylinder position sensor
Q25L is for applications that require precise signal transmission over long measuring distances, such as pneumatic pumps, slides, blanking or molding systems. -
WAGO releases TP-343+ thermal transfer printer
TP-343+ can print on wire markers and heat shrink tubing on a continuous reel. -
Calex releases high voltage multiplier
Devices are capable of handling AC inputs up to 5kV peak to peak, with AC input frequencies from 5kHz up to 100kHz. -
AMCI introduces 2600 Series programmable limit switches
2600 Series PLS (Programmable Limit Switch) Controller Modules work with Allen Bradley’s CompactLogix PAC and MicroLogix 1500 PLC. -
Measurement Computing releases USB-502-PLUS temperature/humidity logger
Standalone data logger measures and stores up to 16,382 relative humidity and 16,382 temperature readings and calculates dew point. Price: $110. -
Pepperl+Fuchs introduces X-Series extended range inductive sensors
Sensors are available in 12mm, 18mm and 30mm diameters to deliver sensing ranges of 5mm, 10mm or 15mm, up to 2.5 times longer range than the company's traditional inductive sensors. -
VEGA introduces VEGAMET 391 signal conditioner
VEGAMET 391 can take a single 4-20mA analog or HART input, compute level, flow, totalization, distance, weight or temperature. -
AutomationDirect releases SC series motor contactors
SC series operate with AC coil voltage ranges of 440-480V and 500-550V at 60hz and are available in frame sizes of 43mm, 54mm and 67mm. -
AutomationDirect expands Dinnector terminal blocks
Among the products added are supplementary circuit breaker terminal blocks and sockets. -
AutomationDirect adds analog CPUs to PLCs
Analog CPUs have two analog inputs and two outputs with ranges of voltage up to 5 Vdc or current up to 20 mA. -
PPT VISION updates IMPACT 8.3 vision software
IMPACT 8.3 works with the Microsoft ActiveX platform, allowing IMPACT data to be seamlessly embedded in local machine and/or factory control systems. -
Rockwell Automation expands safety light curtain line
Added safety light curtains include the GuardShield Safe 4 with an integrated laser alignment system, the GuardShield Cascadeable Micro 400, and the GuardShield Safe 4 PAC. -
Kinetic Automation releases reSCADA for renewable energy applications
reSCADA includes HMI, trend, report, alarm, diary, editor and map functions. -
RF Monolithics releases DNT2400 RF I/O modules
Operating in the 2.4 GHz ISM band, DNT2400 has 3 ADC inputs, 2 DAC outputs and 6 GPIOs. Price: $69. -
Cyberlogic updates its OPC server suite
Updates include 64-bit editions of its OPC server suite, driver suite and bridging suite software. -
Advantech releases PCM-3761I digital input card
PCM-3761I is a form C type eight channel relay and eight channel isolated digital input PCI-104 card for machine and production automation. -
Eaton announces D93 series solid-state relays
Solid-state relays perform many of the same applications that an electromechanical relay can perform. -
GE Fanuc announces PAC8000 controllers with DCS functionality
PAC8000 controllers work with Proficy Process Systems software to provide a complete distributed control system. -
GE Fanuc announces Proficy Workflow for Water/Wastewater
Proficy Workflow helps operators understand what’s happening around them and how to react in a sequenced and procedural manner that is repeatable every single day. -
Thermo Fisher announces Flo-Cal online calorimeters
Flo-Cal 6000 and 8000 calorimeters measure the heating value of combustible gases for refineries, landfill operations and steel plants. -
iKey adds panel mount to SlimKey keyboards
SlimKey industrial keyboards are available in panel mount configurations for integration into workstations, kiosks and industrial environments. -
AXIOMTEK announces eBOX639-836-FL embedded computer
eBOX639-836-FL fanless embedded system supports Intel Atom N270 1.6GHz processor with a 533MHz FSB and the Intel 945GSE Express chipset. -
CoroWare introduces Explorer all-terrain robot
Explorer robot can operate in unstructured, outdoor environments. -
Elobau introduces 145NTG nano push-button
Tiny 145NTG can be incorporated in the knob of a joystick or a multifunctional handle for a shifter, or into a control panel. -
Hexagon Metrology introduces TESAStar CMM motorized probe Heads
The probes deliver -180 to +180 degrees of revolution, and +90 to -116 degrees of pitch, with high speed indexing for Brown & Sharpe Global Coordinate Measuring Machines. -
Digi introduces wireless iDigi Tank for storage tank monitoring
iDigi Tank includes wired and wireless hardware, software and services necessary to build applications for connecting remote tanks of liquids, solids and gases. -
Matrox introduces Supersight e2 imaging platform
Supersight e2 offers OEMs performance and flexibility for machine vision applications that generate extraordinary amounts of data. -
Industrial Video & Control introduces IR illuminators
Infrared illuminators offer an inexpensive way to extend the viewing range of cameras in situations where there is little or no ambient light. -
Phoenix Contact releases non-incendive barrier modules
Modules limit energy to safe levels, which prevents arcing or sparking and allows live wiring on the device in a Class I, Division 2 or Zone 2 area. -
Sherborne Sensors releases Series T233/5 servo inclinometers
Family of dual axis (x and y) gravity referenced servo inclinometers are for use in industrial applications where a high level of accuracy and resolution are required. -
M&M Software introduces fdtCONTAINER OPC Server
fdtCONTAINER combines FDT and OPC, allowing access to device parameters even in heterogeneous Fieldbus environments. -
ASI announces 100 Amp DIN rail power supply
Compact power supply has universal auto-ranging input which means the same part can be used with 340 to 550 VAC to provide a 24 VDC output. -
CLICK micro PLC series expands to include three new CPU models offering built-in analog.
Three new CPU models with built-in analog I/O have been added to the CLICK Micro Brick programmable controller line; CPUs also have four built-in discrete inputs and four discrete sourcing, sinking or relay outputs. All CLICK CPUs are configured with easy-to-use programming software which is available as a free download. -
Cognex Connect connects cameras, communications and controls
System enables out-of-the-box connectivity between Cognex In-Sight vision systems and virtually any major PLC, robot, HMI and Fieldbus system commonly used in factory automation.




