Industry Products

EKI-1528 and EKI-1526 have 8 and 16 RS-232/422/485 serial ports in a 1U rackmount chassis for high-density remote monitoring, management and control of serial devices over Ethernet and IP networks.

Magnetic drive components operate on the principle of attractive force and thus function without contact, resulting in ultra low dust generation.

IAP-6701-WG+ industrial wireless products support IEEE802.11 b/g and Power-over-Ethernet, with a 54 Mbps transmission Rate.

D70 Series seal withstands severe process applications and comes with a backing plate that will prevent the diaphragm from rupturing if the pressure sensing instrument fails.

Updated versions meet hazardous area requirements by continuously purging the enclosure with compressed air or nitrogen.

Fixed and pluggable printed circuit board terminal blocks are available in many styles.

VWDIR20 AC gearmotors feature 1/4 horsepower 115V 60 Hz split phase electric motors, fixed output speeds from 120 to 6 RPM, and continuous torque ratings from 100 to 600 in-lb.

EPC-945 has Intel dual-core processors, 945GME chipset technology, and supports up to 2GB DDR2 memory.

The 8I20 will supply peak currents of 30A and RMS continuous currents of up to 16A for synchronous permanent magnet servo motors.

With a power range of 3000W, ION 3000 provides network connectivity, power amplification and advanced motion control.

Enhancements include an axis wizard which helps designers quickly configure motion architectures for testing and an auto-tuning feature for current loop and position loop of servo motors.

Magellan now provides 1, 2, 3, and 4-axis chip set versions that can control DC brush, brushless DC, microstepping, and pulse & direction motors.

Additions include a multi-input field unit, high-gain antenna, and remote sensor mounting on selected SCADARange field units.

The small profile of the sensor allows it to be mounted in narrow spaces, like those found in packaging applications.

Devices include multiport serial communication cards, CAN communication cards, data acquisition cards, and RFID systems.

ALOHA 7-in-1 laptop display console has a 10.2” or 12.1” wide touch screen control unit.

PolyWorks software provides point cloud digitizing, dimensional analysis, comparison to CAD, and reverse engineering.

Beacon tag is a long-range active RFID tag appropriate for tracking mobile assets, controlling access or online inventory, and locating assets or personnel in designated areas.

Strip apply terminal blocks markers are available in many popular versions to fit terminal blocks from all the major manufactures.

Available in 1 to 100 hp, all motors have a base speed of 1800 RPM and are electrically reversible.

PA15T fits into the existing cutouts of many common 15” HMI products, including Parker’s own PS15 model.

ASComm.NET can be used in Windows, console, service, and web applications. Free demo available.

I/O module enables easy interfacing with Beijer's H-T40m-P HMI for simple monitoring and automation tasks without the need of a PLC.

T-BOX LT extends license-free communications to SCADA and RTU applications in areas lacking cellular or land line telephone coverage.

PCIe-FIW64 provides four IEEE 1394b (FireWire 800) ports for multiple IEEE 1394b cameras and supports total data transfer rates up to 3.2 Gbps.

Automation Control Platform (ACP) supports Ladder Diagram, Function Block Diagram, Sequential Function Chart, Structured Text and Instruction List plus Flow Chart.

Built around the Intel 945GME chipset, the FW-7872 provides up to 4GB of DDR2, four Gigabit Ethernet ports and two internal 2.5" drive bays.

LTC100 converts RS232 signals to RS422 or RS485 signals and vice versa.

CENTERLINE 2500 ArcShield option provides arc flash protection per IEC/TR 61641:2008 for arcing durations up to 300 milliseconds.

MDM connector features contact pitch spacing of 0.050", providing maximum signal density for applications where board space is at a premium.

750-645 monitors and analyzes vibration severity and shock pulse feedback from roller bearings.

EKI-1221 and EKI-1222 have RS-232/422/485 serial ports with redundant 10/100 Mbps Ethernet connections for connecting Modbus ASCII/RTU and Modbus/TCP devices and equipment.

GC Series mid-range IEC contactors, overloads and accessories are available in four frame sizes, ranging from 25 to 140A.

MMP-TM55-24-12V GP52-079 accepts any 12 Volt DC source, including battery power.

Up to 32 I/O modules can be connected to the gateway, resulting in a system that can handle up to 512 digital I/O points or 128 analog I/O points on a single gateway.

LANReach connects any embedded device to 10/100BaseT LANs with minimal programming, providing a sub-$10 embedded serial-LAN solution.

VirtuaWatt web platform enables customers in demand response programs to maximize their energy consumption.

Quik-Spec provides fusible solutions that make it simple and cost-effective to selectively coordinate a fused electrical distribution system.

Intrinsically safe G460 simultaneously detects up to six gases.

AM-1600CL (monochrome) and AB-1600CL (raw Bayer color) models use the Kodak KAI-16000 dual-tap sensor to deliver 4872 x 3248 pixel resolution at 3 frames per second.

Power ratings for the TBL Series range from 15W to 150W, with single output voltages of 5VDC, 12VDC or 24VDC.

I2CXpress I2C protocol exerciser/analyzer is suitable for I2C bus system development and debug.

Flag and Tee connectors and motor lead disconnects are now available up to 500 MCMin size.

LS-C41 has a high-speed, high-accuracy analog PID controller, paired with an efficient PWM-based valve driver.

CLEAN TRAY enhancements include sloped-top fittings, variable angle fittings, and telescopic straight sections.

Advanced Energy Solutions allows industrial power and cogeneration plants to balance electricity generation demands with efficiency and regulatory constraints.

T1FLO has an active cooling ventilation system with a fan, vent, filter and thermostat.

MOVI-PLC can handle up to 64 axes of motion control applications, with curves calculated online, multi-axis interpolation and kinematic transformation.

VeriSens IP69K smart vision sensors calculate 2-D position correction, provide data on the position and angle of the target, and survive high temperature/high pressure wash downs.

Using the EL6688, different machines, system components or production lines can be accurately synchronized with each other or with an external grandmaster clock.

Series 423 M16 connectors are now available with a PG11 cable outlet for cable diameters from 8 to 10 mm.

CSB1100CL-10 provides machine vision engineers with an alternative to CCD-based monochrome cameras.

Low-Peak CUBEFuse unit offers Type 2 (IEC 947-4-1) coordinated motor starter protection.

E-stop switches are now available in both metal and plastic and with either a 40mm or 60mm operator head.

Series D820, D824 and D825 flanged chemical seals protect measuring devices against aggressive media.

Profibus Configurator makes Profibus network setup and I/O configuration for Simatic 505 and CTI 2500 Series processors simple and convenient.

PlantTriage software includes a new tool that graphically highlights and pinpoints the root cause of process interactions.

DataViews v9.20 graphic visualization development tool is updated for the Intel Solaris 10 UNIX-based operating system.

SimpliFiber test kits allow a single technician to quickly perform tasks that previously required a two-person team.

P992 and P356 pressure sensors provide furnace control suppliers with a device that assists with combustion optimization parameters.

IAMS can accept RTD, TC, Ohm, potentiometer, mA, VDC and process input signals, allowing the units to be connected to most common sensors.

IP69K rated inductive proximity sensors operate in high shock and vibration environments, and in extreme cold and heat.

IronHorse™ three-phase cast iron C-face motors are now available for face or flange mounting applications and come with a 2-year warranty. These TEFC TC-frame motors range from 1 Hp to 100 Hp. Prices start at $130. All IronHorse motors are in stock with FREE shipping on orders over $300.

OMB5200-120 fan tray assembly delivers 340cfm of directed airflow for rack-mounted industrial enclosures and electronic equipment cabinets.

DeltaV switches provide megabit and gigabit speeds over wired and fiber communications and are available with 8 to 24 ports in DIN rail and rack mount versions.

Application Development Kit (ADK) v6.5 now supports all the company's motion control products including the SPiiPlus 3U-HP, SPiiPlus LF, MC4U, and the LDM 3U linear drive.

cRIO-9073 system combines an embedded real-time processor and a user-programmable FPGA chip within a single chassis.

Products include NI 9225 300 V power measurement module as well as the 9235 and 9236 8-channel strain gage measurement modules.

MXB-P linear actuator is capable of velocities of up to 150 inches/second and accelerations of up to 1200 inches/second2.

MICROSERIES relays for hazardous locations include 12 VDC, 24 VDC, 24 VUC, 120 VUC and 230 VUC versions.

Enhancements include pre-defined templates for backup, new user interface, improved manageability, enhanced replication and recovery capability.

Type B700 pressure switches can be used in Class 1, Division 1&2 and Class 2, Division 1&2 hazardous locations.

Mobile Print Station 150 is a small notebook computer that is compatible with DuraLabel printers.

The CAN bus controller meets the CANopen specifications DS 301 and DS 401, while the POWERLINK bus controller has two M12 connections for the fieldbus.

P250 sensors incorporate a stainless steel diaphragm in an all welded 304L stainless steel housing making them well-suited for hostile environment applications.

BCF10 sensor can detect liquids with high concentrations of chlorides, such as soaps and cleaners.

Telvent Alarm Manager provides the pipeline industry with a complete alarm management solution for SCADA systems.

Ovation Security Center helps power generation customers comply with the North American Electric Reliability Council (NERC) Critical Infrastructure Protection (CIP) standards.

ADAM-5240 provides high-speed 4-axis motion control for use with the ADAM-5550 series PACs (Programmable Automation Controllers).

Advantech's touch panel computers are compact & rugged HMI platforms for seamless interaction between humans and machines. They are available in sizes ranging from 3.5” to 17” and feature low power consumption. The TPC-1770H is a high resolution 17” SXGA TFT LCD version.

FPM-5171G industrial flat panel monitors include a full range of industrial-grade units with multi-function capabilities and brilliant displays.

The transfer chains’ transport attachments are made from polyacetal resin.

Enhancements include an API that enhances developer productivity; higher database performance; and support for KD-Tree, a database index for spatial and pattern-matching applications.

Advantech Studio connects you to the world with powerful automation tools to develop HMI and SCADA applications. Advantech Studio enables complete control and monitoring from anywhere outside the plant through any connection to the internet. Advantech’s LogixView is the latest package with many features.

Advantech’s distributed motion control series are categorized into two groups – master cards and slave modules. While the master card is kept in the host PC, the slave modules can be distributed so that they are next to motor drives on the factory floor. The PCM-3202I is a 2-port RS-485 PCI-104 master card with many features.

Advantech’s USB series consists of true plug & play data acquisition modules. No more opening up your computer chassis to install boards. Just plug in the module and get the data. The USB-4622 is one of Advantech’s many USB I/O modules with many features.

Programmable Automation Controller’s (PACs) play an important role for CPU-heavy control tasks. Advantech’s PACs are designed with time-deterministic logic, motion, and process control. The ADAM-5550KW is one of Advantech’s PACs with many features and easy-to-use solutions.

Advantech’s Industrial Panel PC’s (IPPC’s) are powerful computing and robust platforms with high performance for factory floors. Constructed with heavy duty aluminum or stainless steel front panels, the rugged design of Advantech’s IPPC’s can withstand tough industrial environments. The IPPC-7157A is a 15” XGA TFT version with many features.

Advantech’s fanless, rugged, cableless embedded automation computers are idea for harsh industrial environments. With compact and rich I/O, multiple expansion slots and mounting methods, these platforms are suitable for a wide variety of applications. The UNO-1150 is an AMD GX2 400 MHz version with many features.

Advantech’s industrial workstations are compact and heavy duty, specifically designed for diverse industrial applications. The IACP-4000D workstation is 19” rackmount with a 5.7” VGA TFT LCD display.

BCM-WEB automatically reads building automation system BACnet data from a BACtalk system and translates the data to Web pages.

Port provides an open solution which allows users to connect devices to POWERLINK networks.

Advantech’s serial device servers enable RS-232/422/485 serial devices to be dual-connected to Ethernet switches for unrivaled reliability. The EKI-1351 and 1352 are 1-port and 2-port serial device models that allow most RS-232/422/485 serial devices to be remotely monitored, etc.

Series 53 A10VO medium-duty axial piston variable pump (250/315 bar) combines electro-proportional controllers with control electronics.

i800 and i801 managed Ethernet switches have eight 10/100BaseTx ports and one Gigabit port.

The 19-pin minifast connector is rated for up to 300 Volts, 4 Amps per pin.

CAT34TS02 combines a 12-bit digital output temperature sensor with 256 bytes of EEPROM to store sensor and threshold configurations. Price: $0.75 in OEM quantities.

Q45D uses the fluorescence quenching technique to measure dissolved oxygen.

QC-1210 for payloads up to 2650 lb has three locking mechanisms to ensure high-moment capacity and strength.

Enhancements in VISION 3.50 Service Pack 1 include expanded electronic signatures for 21 CFR Part 11 compliance for NIR laboratory and process hardware.

ASIST5 terminal block accepts a crimped ring tongue terminal to eliminate the concern of wire connection security.

Rated at 1/20 hp at 230V, 107 series has an operating range from 6 to 90 Hz and a 15:1 range of adjustable output speeds.

OV3640 is a CMOS image sensor module that has image stabilization for capturing pictures at very low light and variable light conditions.

Camera link interface supports multiple thermal imaging cameras for a variety of automated process control and inspection applications.

UT 2.5-MT, -TG, and -MTD knife disconnect, component and feed-through terminal blocks with 2.5 mm2 cross sections save space.

Pico (M8) over-molded cordsets for actuator/sensor applications have an IP 67 / IP 68 protection rating.

LioN-Link bus couplers provide the connection between a fieldbus system and fieldbus-independent I/O modules.

AR-ES8020FL has a high reliability CPU (RDC R8610 supporting 133MHz), 64MB onboard memory, and 128MB onboard Flash storage.

Profibus Bus Interface Module (BIM) connects a Profibus-DP master with up to 32 8000 Process I/O modules and allows transfer of HART data.

ACCESSPLUS II double-hinged cabinet handles network equipment weighing from 250 to 500 lb.

DDW-120 Ethernet extender allows existing twisted pair cables to be used to establish a high-speed remote connection between two Ethernet networks..

SeaLINK/PC.SC and SeaLINK+2/PC.SC embedded USB to serial adapters are software configurable for RS-232, RS-422, or RS-485.

VPF-57 has a 10 ft. beam with adjustable arms which are equipped with suction pads for lifting appliances and similar products from the sides.

Enhancements include PDF support and on-demand 3D printing capabilities.

SHB102 uses the Intel quad-core Q45 Express chipset with low power consumption.

The test kit supports Temperature Transducer Blocks, Device Description (DD) 5.1 functionality, and Field Diagnostics Profiles for FOUNDATION fieldbus systems.

GR04.034 and GR04.035 mini gripper fingers with diameters of 14 millimeters are short, lightweight, yet deliver closing force of 24 or 23 N.

S4000TH has HART communications, is suitable for use in SIL 3 systems, and is approved by CSA, FM and ATEX.

improvements include a built-in battery compartment, eliminating the need for the older model’s external battery pack protruding from the main footprint of the assembly.

An MPG is a manually controlled rotary handwheel that a machine operator uses to move a tool incrementally along an axis.

Falcon FWI and FWO series provide wireless technology for use outdoors.

PLC Checker, for automatic coding rules verification, now supports PLC programs written with the RSLogix development environment.

Micro Motion 7835 Series density meter does not require barriers and galvanic isolators, significantly reducing installation costs in hazardous areas.

Measurement Studio 8.6 supports Visual Studio 2008, .NET and C++ class libraries, Microsoft Foundation Class Library (MFC) 9.0 and the .NET Framework 3.5.

Diamond tool suite now handles multiprocessor systems from signal processing specialist Lyrtech.

LDRA assists users of the Lauterbach’s TRACE32 debugger in fully automating the software testing process.

J Series frequency hopping data radio provides industrial Ethernet communications in the 900MHz and 2.4GHz license free ISM band.

RJ45, USB and RJ11 ATEX Ethernet connectors are for applications in zone 2 and Class I Division 2 explosive environments.

Decode support for IEEE 802.15.4 and ZigBee includes 6LoWPAN, SimpliciTI, and Synkro network protocols.

FFusb interface module provides access to H1 field devices over the USB interface of a desktop or notebook computer.

A300 is for smaller packaging lines where space is at a premium. It can accommodate a variety of packages in 30 inches of line space.

Gear Motor measures 2.14” in Diameter, by 7.75” long, and has a keyed output shaft of 12mm diameter by 25mm long.

WIM45 provides a direct analog output for determining the position of a piston magnet on all types of pneumatic cylinders.

Vortex A/C quickly installs on electrical control panels to maintain enclosure temperatures within a range of 80° to 90°F (27° to 32°C).

Remote mountable configuration is suitable for applications in hazardous areas or hard-to-reach locations.

MCS/MBF are available in diameters from 63 to 280 mm (2.48 to 11.02 in.), torque ratings from 5.5 to 500 Nm (49 to 4,425 lb-in), and 7 different frame sizes.

Tip-Seal manual valve is used in repetitive fluid dispensing applications where operators dispense short segments or long beads of material in adhesive bonding or sealing applications.

OD Precision sensor makes it easier to measure the x-, y- and z-axes for improved quality control.

OpenCV includes movement detection. facial recognition, object tracking, contour processing and image segmentation.

When using the Rapidform plug-in while gathering scan data from the Faro arm, the user literally sees the point cloud being captured from the part in real-time as the scanning process proceeds.

Enhancements include compatibility with Vista, and the ability to read DWG files v2.5 and greater and save files to AutoCAD 2004 and 2008 DWG file formats.

GS1 allows easy generation of DataBar barcodes from TrueType, OpenType, PostScript and PCL fonts.

HP planetary gearhead is available as stand-alone gearbox with a direct-fit or servo-coupling interface; or as a stand-alone 1-4 stage speed reducer.

HIPERDRIVE includes a motor, gears, absolute encoder and fieldbus communication capability for automated changeover on machines.

The system offers local and remote diagnostic alerts to warn personnel of any impending trouble with the valve/actuator or the valve communication and control terminal.

PCM-3202I supports two independent AMONet (Advantech Motion Network) RS-485 master rings with each ring controlling up to 2048 I/O points and 256 axes.

Actuator ensures constant and precise valve position in either the open or closed setting when electrical power is off.

Enhancements include an improved compiler and debugger, and Resource Tracking Window to locate potential resource leaks that can decrease system performance over time.

Power Engineering International, October 2008 By Tim Probert Technical failures in the power industry are not only difficult to avert but also extremely costly. To ensure the availability and reliability of steam turbines for power generation, this monitoring and testing system, based on hydraulic triple-redundancy, protects against undesirable turbine switch-offs.

Model 4710 contains a precision instrumentation amplifier, filtered output and a built-in excitation supply.

Plastic conveyors combine increased durability, improved performance and reduced maintenance in a quiet, compact package.

XP2i intrinsically safe digital pressure gauge is weatherproof and corrosion resistant, making it suitable for challenging environments.

Soft placement module gently lowers bottles into cases or trays without damage to the label, closure or container integrity.

Model CCSFU15CC18, a UXGA resolution (1600 x 1200) color camera, incorporates FireWire-B (IEEE-1394.b) technology for image signal output rates of 800 Mbps.

Accessories include a shunt release, auxiliary contact and alarm contact.

Enhancements allow users to securely tunnel HDA (Historical Access Data) data between OPC clients and servers.

Via IP over Ethernet, JR50 utilizes portable network access to remote assets such as field-installed controllers and intelligent sensors.

WINCAPS III saves users valuable development time by allowing them to program a robot on an offline computer, without the robot having to be in operation.

VWDIR33 AC right angle gearmotors have 1/12 hp dual voltage (115/230V), dual frequency (60/50 Hz), single phase permanent split capacitor electric motors.

SI-APPMOD Series of preprogrammed monitor and control solutions include a tachometer, counter, hour meter, timer, and analog ranging units.

miniMOORE family of multi-channel analog signal conditioners provides up to four I/O channels in a 1 inch (25.4 mm) footprint.

Tiny NET232 jr has an RJ45 Ethernet port on one side, and a short RJ45 serial cable on the other, a web server and email notification.

FactoryTalk VantagePoint allows end users to self-configure Web-based dashboards, trends and reports.

Enron Modbus is a modification to the standard Modbus communication protocol, used in chromatographs, flow computers, odorization systems, RTUs, and fire/gas alarm systems.

FactoryTalk ViewPoint software supports displays of FactoryTalk and Allen Bradley PanelView Plus applications via any Internet browser.

Twist-On wire ties allow end-of-arm tool builders to easily attach air hoses and or power cables to the tool.

Ultimate PAH automated label print and apply system can print on a variety of materials and apply labels to flat, angled, and curved surfaces.

SST Modbus and PROFIBUS modules support Add-On Profiles for integration into the ControlLogix system using Rockwell Automation’s RSLogix 5000 software.

FPM-5171G has Direct-VGA and DVI-D signal transmission, which allows a VGA control card to be used within a system.

eNetMeter monitors real-time network health to minimize downtime and predict imminent failures before they happen.

FactoryTalk uses a service-oriented architecture (SOA) to support applications in the automotive, CPG and pharmaceutical industries.

The utility in RSLogix 5000 programming software provides seamless integration with DELMIA V5R19 PLM software from Dassault Systèmes,

ET2 and ET5 Series unshielded transformers are available in 15 kVA through 75 kVA.

SM2316D-PLS2 and SM2316DT-PLS2 are complete servo systems with built-in controller, amplifier and encoder.

The level gauges provide reliable liquid level measurement through the use of a magnetic float technology which does not require external power.

DT9871U version for USB and DT8871U for Ethernet offer less than ±1.5 uV of noise and temperature accuracy of ± 0.15 degree C.

Software expands the decoding capabilities of the DataMan 100 vision-based ID readers to read up to 128 codes.

Auto-lockdown security capabilities allow a DeltaV user to automatically lock and unlock the port access of all the switches in the network.

Energy Chain E4.350 is wear proof, maintenance free and resistant to seawater and mineral oil.

PlantPAx systems and solutions cover process control tools, programming tools, process optimization, batch and sequence control, process safety, asset management and more.

SCADAPack 330E and 334E provide multi-vendor interoperability and reliable communications through native DNP3 and IEC 60870-5.

Computrac MAX 4000 has a web server that allows test results to be downloaded, and test parameters to be uploaded via a local intranet.

Power PMAC controls up to 128 axes simultaneously and has a built-in script language for both motion sequences and general machine and I/O logic.

Trinity MKJ Series connectors are up to 71% lighter and 52% smaller than larger, heavier MIL-DTL-38999 connectors with equivalent electrical performance.

With ampere ratings from 10A to 30A, 505 Series 6x32mm (3AB) fuse can safely interrupt fault currents at 500VAC/VDC.

Field kit monitors a building’s energy efficiency and indoor air quality, and transmit the information wirelessly.

Automation Systems Interconnect, Inc. offers new line of DIN rail mounted miniature circuit breakers that are UL1077 Recognized for use as supplemental protectors.

AC outlets include both DIN rail mounted modules and connector modules that can feed AC power through the cabinet wall in a wide range of socket configurations.

PICOe-GM45A has an Intel Core2 Duo processor platform with both PCI Express (PCIe) and PCI edge connectors on a half-size form factor.

Video Historian archives video that documents procedures in batch applications, provides visual proof of regulatory compliance, and monitors machinery.

MicroLogix 1400 controllers come with or without embedded analog I/O. Prices start at $795.

Facility Analytics provides a set of pre-configured, out-of-the-box reports and data mining tools for reducing costs, optimizing load factors, decreasing fault response times and achieving overall better efficiency.

Pulse SCADA/HMI application generator software enables application engineers to work with an unified environment regardless of the project deployment nature.

D12 detector monitors 30 gas quantities within the installation area using smart electrochemical gas diffusion sensors.

FCT Series can be used in the on-line analysis of molten polymers and other applications involving high temperatures and pressures.

The system provides the capability of rapidly monitoring up to ten separate sample locations with a single near-infrared spectrometer.

ESM and DSM Series devices are single and double switch modules, supplied ready to install with optional cables or connectors.

UPS line includes parallel redundant, single-phase 6 kVA and 10 kVA rack mountable units.

GE-100 Series 100W power supplies have an 88-264VAC input range and efficiency of 84%.

ADAM-5202 provides up to 128 communication slaves and supports distance communication of up to 100 meters.