Industry Products

The AR-ES0892 is powered by the latest Intel Core 2 Duo, Core Duo and Celeron M processors. It has one PCI Express x16 and PCI Slot for expansion, a Trustee Platform Module (TPM) for software security, Anti-Shock Drive bay for 2.5” SATA or ATA HDD, and an Industrial Grade chassis.

The PSK 40 module is 40mm wide x 20mm high and incorporates a 6mm diameter ball screw with the option for 1mm or 2mm lead. The ball screw is manufactured to tolerance class 7 with a preloaded ball nut for high positioning accuracy and stiffness. It is suitable for medical, semiconductor, and small machining applications, where high stiffness and rapid cycle times are required.

Skorpion EISK5 and EISK8 fiber switches boost link distance and provide galvanic isolation, increasing immunity to electrical noise and lightning strikes. The rugged fiber series can extend distances up to 2 km multimode and 15 km single-mode. All fiber models meet regulatory approvals including UL 508, C-UL, CSA C22.2 No. 14-M9, CE Mark and RoHS compliance.

National Instruments today announced the industry’s first high-speed digital I/O instruments for PCI Express to deliver up to 200 MB/s dedicated throughput per direction to and from the host processor. The NI PCIe-6536 25 MHz and NI PCIe-6537 50 MHz low-cost digital I/O boards build on the throughput of the PCI Express interface to acquire and generate large digital patterns that are otherwise impossible to sustain. Using this high-performance bus, the new digital I/O boards can directly stream data to and from the host processor at full data rates with increased performance and lower costs than traditional proprietary test systems. Engineers can use the new instruments to meet a variety of applications including interfacing to memory devices, emulating communications protocols and testing image sensors and display panels.

The latest version of the LabVIEW Digital Filter Design Toolkit has text-based MathScript functions for advanced filter design, new support for multirate filter design and implementation, and enhanced fixed-point code generation that helps embedded designers streamline all aspects of digital filter design, including specification, design, analysis, prototyping and deployment.

With the addition of NI PCIe-8255R, NI PCIe-8231 and NI PCIe-1427 frame grabbers, NI now supports every major digital camera bus, including IEEE 1394b, Gigabit Ethernet (GigE) Vision and Camera Link. Each frame grabber includes NI Vision Acquisition software, a single interface for acquiring, saving and displaying images from industrial cameras.

The VB4 Vacuum-Hoist lifter picks up spools and reels from the side to allow “eye-to-the-sky” stacking. It uses a variable speed hoist for up/down and has a remote vacuum station to provide the attach and release power, with fully integrated fingertip controls located on the handlebar.

RPY industrial electromechanical relays offers 16 and 10 Amp switching in 1 through 4 pole changeover configurations. The relays come standard with a test button, indicating LED and a free wheeling diode is optional for DC coil versions. RPY relays can be mounted directly to a printed circuit board, to a panel with optional top or side flange mounts or, with the use of an optional ZPY socket, on a 35mm DIN rail

Daniel Senior Model 2000 Orifice Fitting to deliver improved safety, maintenance, and up-time. It meets all applicable API 14.3, AGA 3 and ISO 5167 specifications. Safety is enhanced via a retractable locking pin to secure the isolation valve in position when closed. This pin requires a deliberate action by the operator to open the isolation valve, thereby enhancing safety of operation in the product

The EDS-510A Series 10-port managed Ethernet switch provides 3 fiber/copper gigabit ports, making it ideal for building a redundant Gigabit Turbo Ring backbone, while leaving a spare gigabit port for uplink or ring coupling. Applications include process control, shipbuilding, ITS and DCS systems which can benefit from a scalable backbone construction.

Fully encapsulated and connectorized managed and unmanaged Ethernet switches are capable of information transfer and real-time I/O control in harsh industrial environments. The switches support 10/100 Base-T with twisted pair Ethernet cable. The unmanaged switches are available in 5 or 9-port configurations. The managed switch is offered in the 9-port configuration, with one port used as a RS-232 configuration port.

The multiple cable cordsets feature the popular M12 connectors and are available in one connector wired to 2 or 3 separate M12 connectors in both male or female and combinations of both types. Also available is a T connector which can act as a splitter in order to connect two individual cables to a distribution box.

ADVANCED Motion Controls is pleased to announce an OEM-focused program called 'QuickStart.' QuickStart is a system offering including: a servo drive, servo motor, all necessary cables, and an interface board with screw terminal connections to accept an external control system signal - all in one box and ready for fast delivery!

Automation Studio software provides seamless integration of frequency inverters from Danfoss, KEB, Lenze, Schneider and SEW through use of ETHERNET Powerlink open industrial Ethernet network. The inverters can be used in a system and can operate together with servo drives and I/O in a real-time network without problems.

Retriever Series converts serial/Ethernet signals without any modification to the connected PC's hardware or software. The series has three models: RUS-9510A RS-422/RS-485 Isolated high speed repeater; RUS-9520A RS-232 to RS-422/RS-485 converter; and RUS-9530 USB to RS232/422/485 Module

Fully-pneumatic UC Series conveyors are extremely hygienic, making them ideal for a variety of pharmaceutical processing applications, including loading and unloading coating pans, manufacturing tablet cores, and handling or transferring pharmaceutical powders. Unibody Construction Allows for Tool-free Dismantling and Easy Cleaning.

ISaGRAF version 5.1 enhancements include composite functions blocks (embedded objects) that are designed graphically, and a product library that includes IEC 61499 Service Interfaces (SI) for IXL access and Holobloc. They can be used in an application to read or write variable values from any ISaGRAF controller or Holobloc system.

Large format Liquid Crystal Displays can be used in control rooms and digital signs. The enhanced widescreen format is offered in standard sizes of 32”, 40” and 46” and is available with transflective and optically bonded glass.

“Smart Control Units” can synchronize the speeds of up to six different actuators and store frequently used positions for quick selection using only one command. These units have a standardized plug system (DIN8 for actuators and HD15 for operating devices), three or six channels for actuators, and adjustable operating parameters.

PCI-1727U analog output PCI card has 12 analog output channels with a DB-37 connector and is capable of outputting ± 10V and 0~20mA current loops with 14-bit resolution. It’s equipped with 16 TTL DI and 16 TTL DO channels that are suitable for industrial control applications and a universal PCI bus compatible with both 3.3V and 5V signaling.

Simply Modbus test tool allows technicians and system integrators to get to the bottom of MODBUS problems. The software requires little or no training. The software, which functions as a MODBUS RTU or MODBUS ASCII master, can connect directly to a slave device or remotely over a modem or radio system.

The super quiet Vortex A/C uses compressed air to cool enclosures. The noise level is 93% less than other conventional, vortex type cabinet coolers. Three models deliver 900, 1500 or 2500 BTUH of refrigeration, at a smaller size and less cost as an air conditioner.

CmX Series connector features a simplified connection design that replaces conventional circular connectors. The low-profile connectors are 50 percent smaller and lighter than conventional circular connector designs with significantly lower installation costs.

The C9900-F212 and C9900-F214 are stainless steel front plates that protect the C36xx PC from airborne water particles, are IP65-rated, and provide greater application flexibility. This enhancement is ideal for market segments such as packaging, food and beverage production and water treatment.

The ChekVolt interface, installed on an electrical panel, allows maintenance personnel to use a non-contact voltage detector ‘pen’ to check line voltage before and after they open the main disconnect. The ability to pre-verify electrical isolation before opening a panel puts an additional safety measure between electricians and hazardous voltage.

These sensors are designed to measure rotating drive torque using a conventional shaft-to-shaft configuration for in-line placement. The design incorporates a digital non-contact wireless system that provides power to the rotating electronics mounted on the shaft and transmits the signal back to the receiver in digital format.

SeaI/O-520 digital I/O module includes a combination of high-current Form C outputs and optically isolated inputs. It provides eight SPDT relays that can directly switch up to 6A loads at 250VAC and 100VDC. Eight non-polarized inputs can monitor 5-30VDC.

Using a simple USB connection and programming software, DRS61 60mm diameter incremental encoders empower customers to freely program the number of lines from 1 to 8,192, as well as the width of the zero pulse. This flexible programmability allows users to use a single type of encoder that can be programmed at any time, in any location, for any application.

Universal Positioning System lets users position and lock items in any plane. It can be equipped with ball-end mounts or V-block clamps for securely holding video cameras, sensors, and other devices. Ideally suited for use on conveyors and packaging equipment, it provides unlimited degrees of positioning freedom and is very rigid and stable once locked in place.

The 4BKR media-separated solenoid valve controls the flow of either ultra pure or corrosive media preventing premature failure on wetted type solenoid valves. This 2 way, 2 position unit has a low volume valve cavity and rolling diaphragm and won't allow chemicals to gather or dead spots to form which might hinder flow.

Zlinx wireless remote I/O maps directly into a Modbus table, making it an easy fit to any PLC, HMI or PC based control system running LabVIEW or other popular automation software. Wireless modules provide Modbus compatible communication at ranges up to 20 miles.

A smart AC motor drive allowed Centrilift Cable to eliminate a PLC and improve the productivity of winding finished cable onto drums at its facility in Claremore, Oklahoma. Centrilift Cable makes specialized cabling for the electrical submersible pumping systems used in oil and gas wells.

KPXI products are for high speed automated production testing as part of a hybrid test system using precision instruments. Test engineers and designers can combine high-speed data acquisition and tight trigger synchronization of the KPXI products with the precision measurement capabilities in Keithley instruments for a hybrid test system architecture.

JetCon 2401 RS232/422/485 to fiber converter transmits serial protocol over fiber media up to 40km (JetCon 2401-s single-mode) or up to 5km (JetCon 2401-m multi-mode) and provides a higher level of signal quality and security than copper cabling. A fiber optic network link is immune to EMI, RFI, cross-talk, ground loops and other electrical problems, greatly enhancing the signal quality in severe environments.

The ET-10MG offers 8 10/100 Mbps RJ45 ports plus 2 Gigabit combination ports for copper or fiber connections. All of the RJ45 copper ports support auto-negotiating (10/100 or 10/100/1000), auto-crossover and auto-polarity for plug & play connections. The fiber ports 9 & 10 also accept SFP fiber optic transceivers for noise immune links up to 80 km.

InternalWeb DV server software resides within an AXT100 fixed-mount thermal imaging camera and interacts with it, similar to a router's internal web page. Using the server, the AXT100 can connect to a network with Fast Ethernet and stream live video or thermal data to multiple destinations.

D-EPIC control transmitter provides a cost-effective alternative to positioners for Safety Instrumented System (SIS) applications. Exida confirmed the D-EPIC is suitable for Safety Integrity Level 3 (SIL3) service by performing a FMEDA with calculated PFD and SFF values.

Multifunction data acquisition (DAQ) modules and instrument chassis offer increased bandwidth for multiple I/O operations, ease of connectivity, hot-swappable connections, and a sampling rate of up to 3 MSa/sec for a single channel. Users can set up and configure tests swiftly with its plug-and-play USB interface.

ASIMBKKB series offers two circuits in one terminal block that can be mounted on either a 15mm or 35mm DIN rail. It has a current rating up to 20 amps at 300 volts and a wiring capacity of 30-10 AWG. Space is saved in a cabinet along the DIN rail due to the two wiring levels which allows the block to have a double packing density.

Automation Panel 800 offers a high degree of flexibility. Individual expansions for function keys, electromechanical keys, and the E-stop function mean that it can be optimally adapted to the needs of the application. Mounting on swing arm systems allows the operator panel to be placed at the most ergonomically convenient position.

AccuProx analog inductive proximity sensors can sense objects at distances up to 25mm. The sensors are ideal for applications that require precise position sensing and measurement or detection of small variances, such as error-proofing, saw blade deflection, material blemish detection, absolute angle detection and part positioning.

Rosemount MultiVariable 8800 Vortex Flowmeter has isolated, independent vortex and temperature sensors, allowing both sensors to be verified or replaced independently without breaking the process seals. This eliminates process shutdown for verification of the temperature sensor. The flowmeter lowers total installed cost of temperature compensated measurement points by 25% in saturated steam applications.

Capable of speeds up to 30 cases per minute and priced from $52,000, the GS100 series is ideal for a wide array of applications, including food, beverage, consumer goods, and general manufacturing. The GS100 series provides a cost-effective, fully automated palletizer for larger, multi-line operations where high-speed palletizing is not cost-justified, or for converting applications from manual palletizing.

GS110 Process Imaging System for Low Emissivity (Low-E) glass monitors one-side coated flat glass. With the addition of an IR point sensor to measure the temperature on the uncoated side of the glass where the emissivity is both known and significantly higher, the GS110 can automatically correct the thermal image and provide a more accurate result.

CAT1 is an intelligent loop powered 4-20 mA transmitter with linearization; CAT2 is a signal conditioner offering a variety of output options and High and Low flow rate alarms; and CAT3 is an intelligent signal conditioner with linearization and provides a pulse output scaled per unit of flow and optional High and Low flow rate alarms.

The Allen Bradley SmartGuard 600 safety controller, measuring a compact 4 x 3.5 x by 5 in. is for applications that have traditionally fallen between safety relays and safety PLCs. This safety controller helps reduce the wiring and installation costs commonly associated with relay-based systems, and tightly interlocks with programmable controllers.

The Equipment Operations Module leverages the ISA-95 information standard. It helps manufacturers increase operational performance and manufacturing responsiveness by capturing critical equipment performance events and efficiency information. This real-time information is provided to operators and decision-makers, enabling them to take immediate action to improve operational performance.

Built on the industry standards-based ArchestrA software architecture, the Wonderware System Platform allows customers to have one common strategic platform for all of their networked supervisory HMI, SCADA, production management (MES) and performance management (manufacturing intelligence) solutions.

FactoryPMI "Retargeting" allows users to seamlessly launch projects from any server on the network in any client. This paves the way for a global SCADA system. Authentication sessions are maintained during a retarget, allowing users to jump to any screen on any application that they have permission to access without needing to log in again.

DCS800 power converters have supply voltages of 230-1200 Vac, outputs from 20 to 20,000 Adc, and CE, cULus and C-Tick approvals. Expansion modules are available for all commonly used fieldbuses, and for additional analog and digital inputs/outputs.

Marathon Blue Chip XRI motors improve system reliability while maintaining optimum motor system efficiency and substantial energy savings. Available in 15-100 hp sizes, Blue Chip XRI motors meet NEMA Premium efficiency levels and are an excellent choice for use with compressors, blowers, conveyors, pumps, and in dirty or dusty environments. Prices start at $765.00.

The NYCe4000 multiple-axis controller integrates the complete control and drive hardware in one unit with a smaller footprint than an industrial PC. Thanks to its open software architecture, the high-end motion controller is extremely flexible for automating modules and complete machines with optimal code protection for the OEM.

TVI40N Series Incremental Rotary Encoders have an outer diameter of 40mm, are IP54-protected, provide pulse outputs up to 1024 ppr, and are ideal for space-restricted applications. They offer a tangential cable outlet that ensures a buckle-free connection.

UC Series features a unibody construction for tool-free dismantling and easy cleaning. The conveyors are extremely hygienic, making them ideal for a variety of pharmaceutical processing applications, including loading and unloading coating pans, manufacturing tablet cores, and handling or transferring pharmaceutical powders.

801-HV is a positive-displacement, two-component meter-mix dispensing system designed to apply small precision beads and small metered shots of precisely mixed resins. The fixed-ratio design improves production rates and product quality, and reduces manufacturing costs in micro-dispensing applications.

Major system enhancements to Industrial IT Extended Automation System 800xA include features that help customers add applications to running processes without requiring costly system downtime, and integrate multiple 800xA systems into one control room. Users can add programs, modify configurations, and implement software upgrades while production is running, and then simulate the impact these changes will have on running production before they are executed.

Model OS24-PS Solar Power Supply provides power to electrical, electronic and electro-mechanical devices in areas where conventional power is inaccessible or too costly to provide. Each system is sized to meet the power demands of the connected equipment and geographical location of the install site.

UNO-2053E platform offers dual LAN, dual USB, PC card interface, and two RS-232 communication ports. It can be provided with Windows CE which is pre-configured and optimized for on-board device drivers. To expand storage capability, the UNO-2053E allows for an internal 2.5” HDD that can be used for large data back-up requirements and OS installations such as Microsoft Windows and Linux.

DUPLICON Power Distribution System is a stackable plug connector system that meets protection category IP67 standards. Designed for energy distribution in large-scale machinery and systems, DUPLICON offers uninterrupted communication from the mounting rail in the control cabinet across the decentralized power distributor to the device connections in the field.

Q12 Uprox + sensors are able to achieve a full 5 mm sensing range when flush mounted. The sensors incorporate coils on a PCB with staggered oscillator frequencies to avoid mutual interference. This allows Q12 sensors to be mounted directly next to each other, fully flush, and embedded in metal. The miniature sensors detect all metals at the same rated sensing distance.

Four industrial Ethernet routers provide secure access to the Internet via an integrated analog or ISDN modem that provides global application options. Access to networks behind the routers is granted to authorized users only, making it possible to conceal connected networks or machines behind a single IP address. New routers include two industrial access routers and two mini routers.

Wide-Mouth Bottle Grabs have air-powered internal bladders that pick-up bottles gently by the neck, from the top, and attach and release in milliseconds for use in high speed packaging lines. Designed to prevent the distortion of wide-mouth bottle tops and containers, especially PET plastic sports drink bottles, they can grab using only 30 psi of pressure.

Machined Plastic Conveyor Components are custom engineered engineered and machined plastic components, including star wheels, chutes, and manifolds for pharmaceutical and food packaging applications. Parts are machined from materials such as HDPE, PVC, UHMW for high wear applications, anti-static plastic where large volumes of dust are created, and Lexan for machine guards, manifolds, and other parts where visibility is important.

DurA-Tek brushless DC motors feature integrated drive electronics enabling enhanced motor controllability in a smaller, lighter package. Their 3.0-inch outside motor diameter and standard 2-wire electrical hookup further allow them to replace similarly sized brush-commutated DC motors while delivering relatively higher performance and extended service life.

BMS-136 and BMS-236 Single/Dual-Port Serial Device Server provides a reliable communication connection between RS-232/422/485 serial devices and an Ethernet LAN/WAN. BMS devices can be configured as a TCP Client/Server or UDP and operate in Direct IP Mode, Virtual COM Mode,and Paired Mode.

Safety Manager Release 110 includes new integration capabilities with systems such as process simulation tools and fire and gas detectors, as well as a data exchange and control communication protocol that will allow safety engineers to design and build large integrated and distributed plant-wide safety strategies.

M-430iA/2F food robot is capable of picking products at speeds up to 120 cycles per minute on a continuous basis while using visual line tracking. In addition, the robot is compact, and can be mounted in a variety of positions including floor, wall or invert, which maximizes flexibility for tight workspaces.

The JetCon 1501 converts 10/100Base-TX signals to 100Base-FX signals. It supports link loss forwarding function and its UTP port supports auto MDI/MDIX function.T he fiber media provides high noise immunity against EMI interferences to greatly extend the network connection range and keep reliable transmission.

The AEP-1000R pure sine wave inverter now has a –30°C to +60°C wide operating temperature range, making it suitable for the most extreme mobile, industrial, marine or military environments. The AEP-1000R Series is a 1U high, extremely efficient and reliable 1KVA rackmount pure sine wave inverter, which delivers clean output power for sensitive loads and for improving AC equipment performance.

VSA-1214 and VSA-1215 Vibration Spectrum Analyzers enable facilities to use vibration analysis in machine-condition monitoring, predictive maintenance, and routine troubleshooting to reduce costs and downtime. The pocket-sized system includes a Vibration Spectrum Analyzer module attached to a Palm T|X handheld computer and software.

The CompactRIO controller is based on Freescale's MPC5200 processor, Wind River VxWorks real-time operating system (RTOS), and the NI CompactRIO platform. The MPC5200, which is programmed with the National Instruments LabVIEW Real-Time Module, gives the cRIO-9012 controller up to 4X processing performance and nearly 2X lower power consumption.

SimSci-Esscor and DNV have developed a link between SimSci-Esscor's VISUAL FLOW safety system design software and DNV Software's PHASTFX flammable effects software module. The link allows engineers in process plants to quickly and easily estimate a wide range of flammable effects during design work. With the link, users can pass stream information at the base of the flare to PHASTFX for initializing one of PHASTFX's jet flame routines.

Building Case (BC) electronic housing system features uniform compact height and allows a variety of PCB-design options in mounting, component height, networking and termination. The system was designed primarily for the building automation industry, where control manufacturers frequently encounter limited panel depth.

InRAx Wireless Ethernet/IP Communication Module (MVI56-WA-EIP) acts as a wireless bridge, enabling remote connectivity between a ControlLogix processor and 802.11 wireless devices including PCs, Laptops, radio modems, and other modules. It allows programming over the backplane and acts as a server to RSLinx, allowing for multiple programs such as RSLogix5000 and/or RSView products to communicate simultaneously with the processor.

iChipSec CO2128 secure Internet Protocol (IP) communication controller chip reduces the cost and speeds the design of new IP-enabled terminals. The chip also includes many hardware enhancements that ensure high-throughput by offloading IP and network security protocols from the host processor. CO2128 supports a wide range of Internet protocols and communication drivers for moving data over 10/100BaseT LANs, 802.11b/g WiFi, cellular and dial-up networks.

The 2500 is TÜV approved for SIL-1 to SIL-3 applications and can be used as a stand-alone safety controller, as a distributed control system for critical applications, or both. It uses voting routines to ensure the process is protected and-equally important-the 99.9999% (6 NINES) availability ensures that expensive downtime is eliminated.

Model 773-Ex e Series of compact junction box connectors for use in hazardous locations is an expansion of the WALL-NUTS product line - a push-wire replacement of twist type connectors for the electrical contractor market. The product is approved for use in Class I, Zone 1 and 2 hazardous locations according to the ATEX and UL Ex (for both US and Canada) standards.

MIC-3321 series single and double layer 3U CompactPCI CPU cards combine the performance of Intel’s Mobile Pentium M 760 2.0 GHz processor, flexible integration with 915GM chipset, and the I/O Controller Hub ICH6. The MIC-3321 series are designed with direct-soldered CPU and memory, providing less weight and higher shock vibration resistance than traditional socket devices.

The UL508-listed XCSF3 3 amp, and XCSF5 5 amp, power supplies have a universal voltage input of 90- 264 Vac. These power supplies feature pluggable wiring connections for easy installation in addition to short circuit, overload, over temperature and input/output over voltage protection. The power supplies are also available in parallel and alarm signal versions. A 10% discount applies in November. .

The Magnum DX line of Serial Device routers provides intelligent Serial-to-IP/Ethernet protocol services that integrate the large installed base of devices that use Serial data protocols for SCADA (Supervisory Control and Data Acquisition) and remote device console access.

Two new EtherNet/IP module options for the Allen-Bradley ControlLogix include USB ports, easy setup and replacement. The modules work with existing EtherNet/IP products and provide capacity to allow for future expansion of user networks. They use the Intel IXP465 network processor chip designed specifically for the rigorous performance demands of manufacturing environments.

Series 6000 22mm brush-commutated iron-core DC motors are ideal for applications requiring the power of an “ironless core” or “coreless” motor without the associated cost. Typical applications include equipment for data storage, medical/biotech, semiconductor processing, automation, and others where DC motors must be relatively small, yet powerful.

6000L Series digital storage oscilloscopes (DSOs) offer four channels of measurements in a compact, rack-mountable 1U-high form factor, giving engineers a space-efficient way to integrate oscilloscopes into test systems. LXI is a LAN-based modular architecture standard for automated test systems managed by the LXI Consortium, made up of leading test and measurement companies.

Enhancements to Mint WorkBench language for motion and machine automation include execution break points, single-step (or 'step into' subroutines or functions) program execution, execute to cursor position, and sophisticated watch facilities that will track the value of variables, etc.

Additions to the SeaLINK USB to serial product line include the SeaLINK+8/232.RJ and the SeaLINK+8.VC. Offering eight independent serial ports, SeaLINK+8 devices connect RS-232 and RS-485 peripherals such as barcode scanners, serial displays, and data acquisition modules to any USB port.

The ThermoLock Shrink-Fit product line now has metric BT, DIN & various HSK toolholders, 3º tapered nose extensions, and five new tool changers.

The AR-B2002 PCI bus I/O control card accommodates gaming machine controls. It has digital I/O, timer, battery backup SRAM, intrusion logger, software security, and a real time clock.

Husky Industrial Ethernet Switch has X-Ring, a self-recovery mechanism that ensures a non-stop network operation. With a network built with 20 to 30 units of industrial Ethernet switches, the X-ring redundant ring allows an auto recovery in less than 300ms when the network fails. The X-Ring protocol incorporates both Coupling Ring and Dual Homing.

OST-CellController allows the rapid development and implementation of a fully automated inspection systems or a vision guided robotic assembly cells without the need for a separate PLC. It can interface directly to most camera systems and vision sensing technology, including high speed line scan systems.

NetBiter I/O Extender connects to NetBiter webSCADA, a web gateway with built-in alarm manager and data logger. The NetBiter I/O Extender provides a wide range of digital and analog I/O, and connects to Modbus.

By combining a P6010 COAX vacuum pump with an air-saving cruise control (PCC) feature and a BL-3P suction cup, PIAB offers a complete solution for plastic bag handling applications in the packaging industry.

SBC84710 fanless embedded board is equipped with the VIA CX700 chipset which integrates all the features of North and South bridges into a single-chip package. Featuring 4 COM ports, DualView and 4 USB 2.0 ports, the SBC84710 is targeted for embedded applications which require low power consumption, lighter system design, rich peripheral connections, 2D/3D graphics ability, and full multimedia functions.

Miniature ball screws feature internal recirculation inserts with excellent backdriving characteristics to promote smooth running and quiet performance. They enable precise positioning for a wide range of linear-actuation applications in the medical and pharmaceutical industries, including instrumentation, pumps, and XYZ assemblies, among numerous others.

CSF-10 A Switching Power Supply has a wide range input (120-230 Vac, 110 Vdc), adjustable 24 Vdc output, is available in a parallel version, and is suited for both SELV and PELV circuitry. The unit complies with all parameters set by the Low voltage Directive and EMI standards.

Model 2810 RF Vector Signal Analyzer is optimized for automated testing of wireless devices and transmitter circuits in production test environments, as well as in new product and device research and development. Keithley claims it has measurement speeds up to three times faster than competitive instruments in production test, takes up half the space, and costs half as much as competitive products.

The JetCon 3301Gigabit Ethernet Media Converter converts 1000Base-T signals to 1000Base-SX/LX signals. It extends the connection range of Gigabit Ethernet device to transmit & receive data via Gigabit fiber cable without performance degradation.

IL MII BK DI8 DO4-PAC Bus Coupler allows seamless connection of INLINE Modular I/O to the Mechatrolink Motion Field Network. When used in combination with Mechatrolink-compatible drives and controls, the MII BK permits easy integration of scalable I/O to provide an overall solution with single network motion and machine control.

Sinamics S120 AC Drive handles positioning tasks such as those found in automatic assembly machines and material handling systems. The drives are available in single phase 230 V in the power range 0.25 to 1 HP, and three phase 460 V in the power range 0.5 to 400 HP. The power modules are available in compact block construction (0.25 to 125 HP) or as chassis units (150 to 400 HP).

Precision Sleeve Coupling has a solid center section that provides a close tolerance fit on ground shafting, incorporates integral self-centering clamping collars at both ends and maintains 0.001 TIR concentricity while in use to assure precise shaft alignment.

JAP100 Cylinder-Integrated Diaphragm Chuck has a built-in air cylinder, repeatability of 0.00004” (0.001mm), and makes it easy to set up a precise chucking system.

SPH613 and SPH1013 series power supplies for 600 and 1,000 watts, respectively, require an installation width of only 56 mm for 600 W and 66 mm for 1,000 W. These power supplies can be used for a full range of industrial applications, offer flexible fixings (DIN-rail or wall mounting) and operate in any position at temperatures of up to +70° C.

FactoryPMI web-based SCADA system now has a plug-in that produces PDF based reports without the cost of individual client licenses or the need to physically install client software at each workstation.

RJFast converts a standard RJ-45 cable into a category 6 Ethernet connector compatible with industrial environments (including IP67) in a few seconds, without tedious, long and costly crimping.

ALAR series direct-drive rotary stages provide angular positioning and velocity control with exceptionally large apertures, load capability, and very high speeds. With the combination of a large aperture and direct-drive motor, the ALAR series offers significant performance benefits compared to worm-drive large aperture stages.

Panther terminals now have Device Net. These terminals can be integrated with process control equipment through a variety of methods, including Discrete I/O, 4-20 mA or 0-10 V analog output, Allen Bradley RIO, Modbus Plus, PROFIBUS and the newly integrated DeviceNet.

IND780 terminal comes standard with Ethernet, two serial ports and a USB master for an external keyboard. The terminal is capable of simultaneously supporting four scales and can provide a metrologically approved sum scale.

IND690 application terminal withstands all industrial environments whether the challenge comes from aggressive weighing samples, cleaning agents or a wet, corrosive, or dusty environment. It can connect up to four scales with a sum scale including any of these weighing technologies: analog load cells, high precision bases, analytical balances and BBK four-series scales.

Tru-Vue series photoelectric sensors are now available with 4-in-1 outputs. This enables a single sensor to operate in NPN normally open, NPN normally closed, PNP normally open, or PNP normally closed configurations. 4-in-1 simplifies sensor selection and stocking because one sensor model can now replace four sensor models.

The new interface provides flexibility for users performing standard weighing, blending or filling or checkweighing applications to interface with their DeviceNet network without the need for an external device. The IND560 built-in target controls can be used to create hybrid automated control systems for process and filling applications.

The Automated Precision Weighing Weigh Modules (WM and WMH) have RS232, RS422, DeviceNet, Profibus DP and Ethernet intefaces. The two products feature readability of up to 0.1mg with capacities of up to several tons. They are all available as intrinsically safe versions for integration in hazardous areas.

DT10, DT20, DMT10-2 and DML40-2 Distance Measurement Sensors allow customers to upgrade from simple detection to measurement applications where previously space and budget made it prohibitive.

Surge protection and wiring device products include surge panels, plugs, connectors and receptacles. 74000 and 75000 Series Surge Panels designed for facilities with 3-phase WYE-configured (4-wire + ground) systems where surge protection for all seven modes in the AC distribution network is required. Industrial Grade Black and White Locking Plugs and Connectors are available in 15, 20 and 30 Amp versions.

WebPort 2005 and WebPort 4005 industrial Ethernet gateway modules securely link serial devices or PLCs to an Ethernet LAN, allowing data access from any workstation. It connects up to four Ethernet-enabled control devices, offers serial connectivity to another controller, a modem for remote maintenance, and a WAN Ethernet port for connecting to the Internet or any IP network.

FieldPort FPIO-I8H-EIP and FPIO-I8H-EIP modules provide full analog capability, HART (Highway Addressable Remote Transducer) protocol, Ethernet-IP and ModbusTCP system interfaces, and work with Rockwell Automation and Schneider Electric Legacy PLCs.

Active Sensor Actuator Interfaces (SAIs) provide users with greater levels of wiring flexibility for achieving modular and decentralized process control in automation applications. The Active SAIs are available in IP 67 housings and support all industry network protocols including Profibus, DeviceNet and CANopen, as well as Ethernet, Ethernet/IP, PROFINET and Modbus/TCP.

The PCI-1625U is a self-contained computer with an onboard DSP processor that will take over the processing load from the host PC. It is designed for industrial applications where a PC needs to communicate with terminals, modems, or other instruments. A user can install up to four cards for total of 32 ports in any PCI bus-based PC.

DataBus IndustrialTuff PROFIBUS DP and PA shielded twisted pair cables deliver high performance and reliability in PROFIBUS factory automation and process automation applications. Cables are available with a selection of special jacket compounds, cable colors, and armoring options to fit application requirements.

TiR Series IR imagers help expert users accurately pinpoint building problems by combining both visible light and thermal images for better identification, analysis and image management. It has a 20 mm germanium lens on a 180 degree articulating mount to view images, even in situations where access is limited.

Ti Series thermal imagers are available in six camera models – the Ti20, Ti30, Ti40, Ti45, Ti50 and Ti55 – designed both for technicians with little or no thermography experience, and for predictive maintenance experts, process engineers and consultants who require the best thermal imagers.

DryLin ZLW is a lightweight, toothed-belt linear drive equipped with a hard-anodized aluminum profile, a DryLin W compact linear guide, and iglide plastic sliding elements. This provides a maintenance-free, self-lubricating, lightweight actuator for a linear drive system.

With ProcessMonitor MIMOSA, enterprise systems can access real-time and historical data and disseminate this information for Condition Based Maintenance, Maintenance & Production Planning and other maintenance and operational tactical purposes. Itincorporates both MIMOSA and OPC Foundation standards.

Two-piece N Male connector line features a quick fitting, cable insertion type connector with a captive internal contact. Minimal cable prep required. The cable conductor easily installs into the captive contact, which is designed for optimum electrical operation.

The S300 has a 270-degree scanning angle, which helps eliminate gaps in the area being safeguarded. This scanner also offers a selectable resolution of 30, 40, 50, 70 mm and is Type 3 (IEC 61496-3), SIL2 (IEC 61508). The S300 is ideal for applications where the hazardous area to be monitored is less than two meters.

These products have various MIL-STD certifications including MIL-STD 901D (Shock), MIL-STD 167-1 (Vibration), MIL-STD 461E (EMI), and MIL-STD 810 (Temperature and Humidity). Ideally suited for a number of military applications including navy, army, and air force, as well as other “extreme” and demanding operating environments, these products have already seen acceptance in various US Navy applications.

IndustrialTuff 1345F and 1346F cables are for use in ODVA DeviceNet industrial networking applications. Both feature TPE jackets, low-temperature performance, and weld splatter, oil, solvent and abrasion resistance for use in harsh environments.

The IPC-5120 supports a Micro-ATX motherboard with up to four half length PCI slots, and the IPC-7120 supports a standard ATX motherboard and up to seven half length PCI slots. Both chassis are RoHS compliant, bracketed for wallmount or desktop applications, and have front-accessible I/O interfaces and expansion slots.

EDDL enhancements for the CSI 9210 Machinery Health Transmitter, giving end users improved access to details surrounding the analysis results, thus enabling them to make even better operational decisions. New displays use familiar dialog boxes to present graphs, charts, and trending of dynamic variables, in addition to text and archived data, in a consistent, familiar format.

Powered by a VIA Luke processor with VT8237R Plus South Bridge chipset, the EP600 low power EPIC form factor single board computer (SBC) is an ideal solution for power-efficient and fanless operation applications. It is suitable for industrial and harsh embedded computing devices that require ultra low power consumption.

The Quattro Drive robot, claimed to be the world's fastest commercial robot, will be shown at the Pack Expo 2006 show in Chicago, IL. It is designed for parts picking and packaging applications.

Enhancements to the UniSort VII sliding shoe sorter include an all-electric switching system, aluminum slats for small-item sortation, and a 30-degree divert angle and standard widths to match the full line of FKI Logistex conveyor systems.

CitectSCADA Reports collects, historizes and delivers reporting data from multiple, disparate plant control systems. With it, users can visualize data from multiple SCADA systems in web browser; analyze this data with MS Excel; transfer data between control systems and MS SQL or Oracle databases; historize all control system data into MS SQL Server 2005; and report using industry standard reporting tools.

Belden has expanded its family of IndustrialTuff DataBus Cables for Fieldbus Applications to meet marketplace needs for versatile cabling solutions that meet Fieldbus Specification IEC 61158-2 (ISA/SP-50).

The Fluke 561 HVACPro multipurpose thermometer combines infrared and contact temperature measurement functions in a single tool for HVAC professionals. It gives users the option of deciding which temperature measurement method – contact or noncontact (infrared) – is most efficient and best suited for the application.

Municipal Water Packages designed for the water/wastewater industry combine Proficy™ HMI/SCADA – iFIX®, Historian and Portal products together in a variety of sizes. Municipalities can select the size of the system they need. They can start small and expand by increasing the tag size of iFIX or Historian applications, or adding Portal clients as needed.

NetBiter webSCADA gateway gives remote access to serial devices over Ethernet, Internet, LANs, telephone modems, GSM and GPRS. The gateway contains built-in features for alarm handling (SMS, E-mail, SNMP), data logging and web-based data access.

XPress DR+ Wireless is a rugged DIN-Rail mounted WiFi 802.11 Device Server for applications requiring environmentally hardened wireless networking gear. It is capable of connecting virtually any type of industrial equipment to the Local Area Network (LAN) or the Internet.

JetPort 5601f RS232/422/485 3-in-one to Fiber Ethernet device server connects RS232, RS422 and 2/4 wire RS485 to one Multi-mode or Single-mode Fiber Port. The serial port can work in various communication modes, including virtual com, TCP server, TCP client, UDP, and serial tunnel. The JetPort 5601f also supports HTTPS and SSH for secured communication management.

The UDS1100-IAP is a single-port Device Server which includes a built-in web server allowing end users to remotely access and manage attached equipment from a standard web browser. The UDS1100-IAP is hardened, operates within a wide-temperature range of -40ºC to +70ºC and supports industrial protocols including Modbus TCP, ASCII, RTU and DF1 to ensure device interoperability.

Rockwell Automation has expanded the FactoryTalk integrated production and performance suite with the availability of FactoryTalk ProductionCentre. Built on the FactoryTalk service-oriented architecture (SOA), FactoryTalk ProductionCentre provides manufacturers with improved process visibility, backward and forward product traceability, and quality assurance across multiple industries.

Economy modules for the line of BL20 I/O bus terminal systems allow up to 16 digital inputs and outputs to be connected using only 12.5 mm of DIN-rail space, providing signal density while considerably reducing the mounting width required. The modules contain integrated wiring and tool-free push-in spring-type terminal connections that save costs and provide quick and easy mounting.

AF Series sensors feature an easy to use sensitivity adjustment along with a keyboard so that adjustments cannot be changed once set. The small compact unit conveniently mounts onto a DIN rail and fiber optic cables of 2 meters can be ordered.

IndustrialTuff ControlBus Low-Loss Coaxial Cables for ControlNet features a continuously corrugated aluminum armored construction to ensure reliable performance in extremely harsh industrial environments. It also has an 18 AWG solid bare copper-covered steel conductor, foam Polyethylene insulation, Belden's Duobond Quad Shield and an inner PVC jacket.

Emerson delivered the company's 500,000th Micro Motion meter to Anheuser-Busch at a recent ceremony. This 500,000th meter was presented to Jeff Steinhart, Anheuser-Busch Vice President, Engineering by Tom Moser, president of Emerson's Micro Motion division, at the Anheuser-Busch corporate headquarters in St. Louis, Missouri.

M-Series sensors are currently being used to monitor liquid level in filler bowls—holding tanks that are used for gravity feed flow control for the dispensing of liquids into bottles or containers. The solution combines the magnetostrictive sensors with a sanitary pipe assembly and a tri-clamp flange that have been certified as 3-A compliant.

The Sitrans DA400 acoustic diagnostic system continuously monitors oscillating positive-displacement pump status and detects even the smallest leaks on pump valves. The system is comprised of four acoustic sensors mounted on the pump and a diagnostics device connected to the sensor by up to 65 feet of cable.

Sitrans P DSIII digital pressure transmitter is the first Profibus PA device available on the market that is designed for SIL2 safety shutdown in accordance with IEC 61508/IEC 61511-1. A Profisafe driver has been added to the standard pressure transmitter enabling the fail-safe transfer of the measured values via Profibus.

AE Solutions and Siemens Energy & Automation, Inc. have developed a new generation of fire & gas alarm and suppression systems. The pre-engineered, pre-configured, and pre-packaged FGS 1400 Fire & Gas System is FM approved and complies with NFPA 72 standards.

Sitrans TH digital headmounted temperature transmitters are compact in design, which enables them to be installed in the sensor connection head. The transmitter can communicate via Hart or Profibus PA and has galvanic isolation for thermocouple applications. Other models are designed for stand-alone applications.

SL3 Series stack light provides clear and distinct visual indication of machine status from anywhere on a factory or office floor. The lamp provides 360 of visibility, even in high ambient lighting conditions. Ideal for retrofits, the SL3 is designed as a drop-in replacement for a variety of incandescent bulb-based stack lights and signal towers.

Rugged Mini extends battery life and reduces time between re-charges. It consumes only six watts in standby mode, 18 watts in the on position while idle and 37 watts at 100 percent utilization. This compares to a typical PC using 75-125 watts. The solution provides a long operating time per charge cycle due to a fan-less, cool running design.

IndustrialTuff Variable Frequency Drive (VFD) Cables, designed to carry power from AC drive systems to AC motors, now includes four new 10 to 16 AWG, 600V UL 1277 cables incorporating a signal pair for brake applications. The cables feature an overall Beldfoil shield plus 85 percent TC braid shield for highly effective radiated and conducted noise protection.

Rack-mounted IndraMotion MTX compact provides high performance in a very small footprint while improving machine cycle times and part quality. It controls up to eight axes in two NC channels with a fast IndraLogic PLC. It can process up to 200 NC blocks per second and has a 30 block look-ahead rate to achieve shorter machine cycle times.

Model 2600-001-006/7 Tip-Seal dispense valve consists of a double-acting actuator, a 13.7” (350 mm) long extension nozzle and a carbide Tip-Seal needle to prevent dripping fluid material at shut-off. For high-volume fluid transfer, the Tip-Seal Valve can flow up to 6 gpm (22.7 lpm). For filling housings, containers and vessels, the optional level-sensing probe and controller can automatically stop flow when the desired fluid level is reached.

MENU for iFIX is a complete navigation system add-on for the Proficy iFIX control system from GE Fanuc. Navigation using MENU is immediately intuitive, with familiar functions like Back, Forward, Favorites and Home as standard. Users can add navigation links to standard iFIX functions like Workspace configure, Database Manager and Mission Control.

DataTuff Industrial Ethernet cables now include three new Enhanced 4-Pair, Category 5e Twisted Pair cables. Two are Low Smoke Zero Halogen, Unshielded, Enhanced Cat 5e cables, whle the other is a Waterblocked/Burial, Shielded Enhanced Cat 5e cable.

LabVIEW drivers for wireless sensor networks give engineers the ability to integrate ZigBee, IEEE 802.15.4 or proprietary wireless sensors into LabVIEW. The free driver software works with sensors from three wireless-sensing leaders – Accsense, Accutech and Crossbow Technology – and includes communication functions and example programs compatible with sensors from each vendor.

C-Series Core Sensor has a three-wire option that offers an alternative to high-cost sealed cables by replacing the connector and cover with three discrete wires that allow sealing against the wire insulation instead of a cable jacket. A simple grommet can then be used to provide tight water sealing.

NI Vision Builder for Automated Inspection (AI) Version 3.0 has a state-machine process model that gives engineers one of the most flexible environments available for configuring vision systems. With this process model, engineers can customize the execution flow of their inspections to meet a wide variety of machine vision challenges, from component alignment to part inspection and verification.

MPN series of brushless servo motors replace the now-obsolete N-Series motors recently discontinued by Rockwell Automation/Allen-Bradley. The MPN offers more torque per frame size than the existing N-Series motors.

Allen-Bradley CENTERLINE 2100 motor control center (MCC) ArcShield option helps reduce arc flash hazards while providing users with increased protection against internal electrical arcs. This version of the CENTERLINE 2100 MCC from Rockwell Automation provides arc flash protection in a low-voltage MCC (up to 600 volts).

Panasonic introduced two new rugged Toughbook computers: The CF-19 convertible tablet PC, and the CF-30 clamshell notebook. Both come with Intel Core Duo processors, security features, and optional embedded access to wireless data networks from all major cellular wireless carriers. In addition, these MIL-SPEC-certified notebooks incorporate daylight-readable screens.

Series 14000 brush-commutated DC motors and gearmotors feature 11-slot skewed armatures to minimize magnetic cogging (or reluctance torque) and promote quiet and smooth operation. They suit a wide range of power applications, including computer peripherals, imaging, and clinical diagnostics, among countless others.

EOTec 2104 Industrial Ethernet Ring Switch offers the performance features of a managed switch with the simplicity of an unmanaged switch. It comes preconfigured for ring redundancy, has self-healing ring topology, and allows for real-time data transfer with IEEE 802.3 Ethernet compliance.

Power Series solid state relays rol-feature 4,000 volts of optical isolation and include LED indicators that indicate when a control signal is applied, making it much easier for users to troubleshoot their control applications. The Power Series 240Di10, 240Di25, 240Di45, and 575Di45-12 SSRs have been tested, certified, and stamped as RoHS-compliant.

Enhancements to Avance 3.0 include serial data aquisition, flexible charting, OPC clients, data analysis tools, a python scripting integrated environment for data analysis. Avance manages, in real time, data from inputs such as manual input, Excel spreadsheets, text files, serial connections (RS-232), and OPC servers. Pricing for an annual license is $500.00.

The Easy-2-Combine tool is easy to use and can be accessed by anyone over the Internet. With the configurator, users can calculate and display entire handling modules online quickly and precisely. The configurator can compile a handling module (a pick-and-place unit, for example)without any extra calculation work. The configurator also provides complete documentation including CAD data for the user.

Enhancements in the SJ200-2 and L200-2 Series of inverters include Sensorless Vector Control technology, trip avoidance functions, side-by-side mounting, built-in timing logic and analog input math (PLC) functions, DIP-switch hand-off-auto, removable control terminal connector, and RS485 Modbus RTU communication interface. A CANopen option is also now available.

The Husky 10-port fault-tolerant Managed Industrial Ethernet Switch has a 2 Gbps backplane, 8K MAC address plus almost all the functionalities of a Gigabit platform switch but without the expensive Gigabit prices. Models HME-821 and HME-823 series can be remotely configured by a web browser, SNMP, Telnet, CLI and menu driven management.

Web-based Lean Tools is a collection of Web calculators that allow users to estimate potential energy savings to be gained by implementing various energy efficiency solutions, including lighting, transformers, drives, power monitoring, and power correction.

The SCADAPack Upgrade Kit features a 32-bit RISC processor, expanded 8 MB memory, and additional communication ports. Optional source level debugging software for C/C++ applications is also available. The total package installs in minutes in the field or factory, boosts performance by up to 100 times, and adds I/O capacity for thousands of analog and digital I/O.

EXTER Pro+ operator terminals have PDF and PowrPoint viewers and an Internet browser, making it easy to ensure that operator manuals, trouble shooting and service instructions always are at hand when they are needed. The PDF or PP files are put on a memory card that is inserted in the operator terminal before delivering the machine.

The PMG17 wireless and battery-free device is capable of generating useful energy from levels of vibration that are 35% lower than previously possible, and across a large bandwidth of vibration frequencies. OEMs, sensor manufacturers and end-users can benefit from using the generators to power easy-to-install devices that accurately monitor machinery and processes.

DNA-AI-225 analog input board has 25 differential input channels with 24-bit resolution and a maximum sampling rate of 1 kS/s per channel (25 kS/s aggregate for the board). The AI-225 has a separate A/D converter for each channel. This configuration eliminates the noise and offset errors associated with multiplexed inputs and at the same time allows all 25 channels to be sampled simultaneously.

Lanolinx Fiber Ethernet Switches include 100FX and Gigabit Fiber models, supporting multimode or single mode fiber. These switches also have 8 10/100 Copper ports and the Gigabit version has a 10/100/1000TX port. In addition, models are available with two fiber ports instead of one.

Aaxeon Technologies is proud to announce the release of new models in our Lanolinx line of Industrial Ethernet Switches. Following up on the successful initial introduction of the product line we have recently added a Wide Temperature option on several models. We have also added SNMP Management to our 8 port Managed switches.

RFID Small Rigid Tag is ideal for harsh industrial applications where ruggedness, chemical resistance or extreme temperatures are a factor. The Tag, is available in both EPCglobal Gen 2 and ISO 18000-6B protocols for worldwide use. The Tag measures 1.22x3.11 in. and is equipped with a wide band antenna that allows the tag to be used on virtually any surface, including metal, plastic and wood.

In response to increasing mandates for RFID-compliant shipments to retailers and the U.S. Department of Defense, Intermec Inc. and Informs today introduced the Informs RFID Experience in a Box Kit. The joint effort includes everything required to meet RFID compliance mandates, apply RFID tags and verify tag information.

The solution, which integrates control, information, implementation and support offerings, is a standard application designed to help brewers optimize production processes through improved process control, production visibility and business intelligence. As a result, brew masters can better manage their operations, improve throughput, reduce waste and decrease operating costs.

Magnum 6KQ Ethernet Managed Field Switch can be configured with up to 12 100Mb fiber ports, or user selected combinations of 10Mb, 100Mb, and Gig fiber ports of any fiber port connector types. The switches use ribbed aluminum cases to produce maximum heat dissipation in a rugged no-fans sealed package. They can be used in the harshest industrial-grade environments, and provide high EMI noise immunity.

QY series are rated from 1 to 50 amps at up to 80 VDC. At 13mm wide, the DC is the thinnest DIN rail mounted breaker on the market with a UL489 listing.

Data CELL FOUNDATION fieldbus cable is rated for ITC (instrument tray cable)/PLTC (power limited tray cable) exposed-run (ER) applications. This allows users to eliminate the conduit when the cable is installed in accordance with recent National Electrical Code (NEC) amendments.

The RS416 is an industrially hardened, modular 16 port serial device server with an integrated managed 4 port Ethernet switch, that can be used to aggregate many serial devices for Ethernet network connectivity. The RS416 operates in electrically harsh and climatically demanding environments like those found in electric utility substations, intelligent transportation systems, and industrial process control applications.

WCS2A/WCS3A PosiTrack Position Tracking System provides fraction-of-a-millimeter position feedback. PosiTrack consists of three basic components: a U-shaped read head; code rail and support hardware; and network and control interfaces. The read head optically scans a uniquely coded rail to determine a carrier position.

Glovia.com v9 ERP solution offers enhanced functionality based on a variety of insights obtained through first-hand implementation in Fujitsu Group factories in Japan and overseas. It delivers detailed production planning with hourly increments, synchronized production based on customer demand, improved operability, and enhanced visualization and optimization of company-wide supply and demand schedules.

Size 11 hybrid linear actuators are now available with encoder feedback. The compact optical incremental encoder is available with two channel quadrature TTL squarewave outputs. An optional index (3rd channel) output is also available for many resolutions. The encoder is offered in resolutions ranging from 200 to 1,024 cycles per revolution (CPR) or 800 to 4,096 pulses per revolution (PPR).

C6920 and C6925 Industrial PCs have 3-1/2 inch motherboards, Intel Celeron M or Pentium M processors up to 1.8 GHz, flash disk, and are rated for operation at ambient temperatures up to 131° F (55° C).

CAD-CONNECT Labeling Software generates labels quickly and easily within CAD programs such as AutoCAD and Visio. CAD-CONNECT eliminates the steps and time spent manually copying identifiers into labeling software.

CUB5 Series Analog Panel Meters have a footprint that is 30% smaller than 1/8 DIN meters and nearly half the cost. Multiple models are available to meet a variety of unique industrial applications, for example, measuring DC current and voltage, processing signals from flow meters, pressure sensors and positioning sensors, and accepting inputs from RTD and Thermocouple sensors.

The Swiss Center for Electronics and Microtechnology (CSEM)launched the ViSe miniature vision sensor system that enables broad-based monitoring and interpretation of visual data in real time, in any light conditions. It allows OEMs to develop application-specific image analysis and response systems aimed at automotive, security, building and home automation, and industrial markets.

Suitable for incorporation into OEM products, microAnalyzer has a miniaturized gas chromatographic module. The microAnalyzer will be available to OEMs for a wide variety of applications including process control, air monitoring, building monitoring, fenceline monitoring, environmental monitoring and situations requiring the detection and identification of trace chemicals.

The DNA-SL-501 serial I/O layer/board offers 4 fully independent, isolated RS-232, 422 or 485 ports with maximum data transfer rates up to 1 megabit per second in RS-422/485 mode. Ports are fully configured with software and different ports may have different configurations. Also released is a hardware Synchronization interface for the PowerDNA cube.

VEAM CIR Series connectors can function as electrical, optical or pneumatic connectors, providing design engineers with the ability to simplify receptacle design processes and inventory. The VEAM CIR connector is also available in high voltage, twin or tri-axial, hermetic and EMC versions.

Offering a range of 16, 32 or 48 individually optically isolated inputs or outputs, these cards are ideal for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others.

More than 200 enhancements to Proficy Plant Applications 4.3 Production Management software help users deploy Production Management systems faster and expand existing systems to tackle business challenges such as regulatory compliance, asset utilization, product quality, and speed to market. It also offers enhanced features for complying with industry regulations, ranging from the Tread Act to environmental mandates to 21 CFR Part 11.

Personal Lockout Kits are keyed-alike padlocks, which means that employees have fewer keys to carry and keep track of, simplifying the lockout process. The kits handle most of Brady's ockout products, which enable users to cover more applications and secure more types of isolation points with fewer devices. This results in lower equipment costs, simplified training, and more compact storage.

DRS21 CoreTech Incremental Encoders are now available in a programmable version. This allows customers to program the width of the zero pulse and the number of lines from 1 to 8,192. End users benefit from reduced inventory requirements. OEMs benefit by being able to use the encoder to determine the optimum PPR for their machine, while providing immediate reprogramming of the encoder to suit specific customer needs.

BradControl Classic I/O modules for DeviceNet come in an 8-port 16-channel format with a selection of I/O configurations supporting both PNP and NPN input devices. Each 60mm I/O module comes equipped with diagnostic LEDs providing status information on network, power, inputs and outputs.

The NA-806 fanless network application barebone is powered by onboard ultra low voltage Intel Celeron M 1GHz and zero cache processors, has four Ethernet ports, and supports fail-over, load sharing and load balancing functions for critical network environments. The NA-806 series fulfills high computing performance with fanless requirement for SOHO network security appliance markets.

Available for download, spindle selection matrix pinpoints the spindles best suited for withstanding the complexities of robotic machining. The matrix matches Dynomax robotic arm spindles with the most common material removal robots on the market, including FANUC, ABB, Kuka, Motoman and Staubli.

TPC-1261H rugged touch panel computer has an AMD GX3 LX800 500 MHz fanless processor and a 12.1” SVGA TFT LCD display with resistive touch. CompactFlash non-rotating storage media makes the TPC-1261H a durable and reliable platform, with the option to add a 2.5 inch HDD for additional storage where the environment permits.