Industry Products

Linux Development Module for ControlLogix and CompactLogix processors enables C/C++ developers to write custom applications for legacy or proprietary applications.

These thermistors can be used in applications previously out of reach of epoxy coated thermistor sensors. Price Starts at $85.

Powered by an Intel Atom D525 Dual-Core 1.8GHz processor and utilizes an ICH8M chipset. The FPC8759 features a built in 22 inch widescreen monitor with a 1680 x 1050 pixels high resolutions, resistive type touch screen and an IP65 rated front bezel. This fully enclosed system also includes a dual 10/100/1000 Mbps LAN, 4 USB ports, 4 serial ports, VGA, audio (Mic-in, Line-out) port and 2 GB DDR3 Memory module which is scalable up to 4 Giga bytes.

MPS75SLE precision ground, preloaded ball-screw is coupled with a low thermal expansion linear encoder that provides accuracy, repeatability and a positioning resolution capability to 25 nm.

Aport-212PG is built with 32-bit NXP LPC1768 100MHz ARM Cortex M3 processor equipped with 64KB SRAM 512KB Flash, 10/100 Mbps Ethernet and two RS-232/485 serial ports.

FWS-2250 has four GbE ports with Intel controllers, up to 8 GB installed in the two memory slots,

Simatic Sipat version 4.1 has an optimized OPC data access interface for data capture and updated device analyzer drivers.

IDOOH-210 has a 21-inch sunlight readable LCD display panel that provides sufficient screen brightness for good image quality.

With a choice of two sighting methods, the pyrometers deliver high resolution fixed focus optics with small spot sizes, digital RS485 communication interface, analog 4 to 20mA output and fast speed of response.

The RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements and using only those wires needed. Price starts at $66.

The DNP480 Series offers 480 Watts of fully regulated output power in a Din-Rail mount case.

These terminal blocks feature a universal foot for DIN rail mounting, UL94V0 housing, nickel-plated copper alloy metal bodies, and plated high tensile alloy screws providing protection against various environments.

These sensors provide reliable detection of solid, fluid or granulated substances and are equipped with a two amp SPDT relay output, with a time delay of up to ten minutes.

Version 12 software performs continuous assessments of the performance of Model Predictive Controls (MPC). These assessments are used to diagnose issues with Disturbance Variables (DVs), Controlled Variables (CVs), Manipulated Variables (MVs), and the MPC Controller itself.

SIP4 PACKAGE, 1W DC-DC Converters B0505S-1W/B1205S-1W/B1515S-1W/B0512S-1W/B2405S-1W, supports order online by Paypal.

0-1Vrms (50 ~ 60Hz) AC signal input, 0-10mA /4-20mA/0-5V/0-10V

Current loop power supply signal isolated converters

Based on 2nd generation AMD Embedded G Series SOC "Steppe Eagle" processors, unnamed Qseven and COM Express Computer-on-Modules have more performance per watt and lower power consumption than previous models.

A single USB cable can be used for data, and simultaneously can deliver up to 100W of power from a single standard USB port which is 40 times the power compared to USB 2.0.

One Series Safety Transmitter is a SIL 2-certified pressure or temperature transmitter designed solely for safety system applications.

Process Safety Management software gives chemical, oil and gas companies an enterprisewide view of process safety risks, and lets them track deviations to safeguards, evaluate the risks and prioritize corrective actions in a timely manner.

The console features an improved ergonomic design and better displays to simplify control system management, reduce operator fatigue and improve situational awareness.

SmartLine temperature transmitters lower plant lifecycle costs by using modular components which simplify field repairs and reduce the parts inventory required to make those repairs.

The i116-CBC combines controller, drive and stand-alone capability into a single unit that provides up to 100 W of peak power without any additional heat-sink and with a single power supply.

Signal isolation transmitter, isolation amplifier, Isolated 4-20mA or 0-20mA signal transmission

Fixed input, unregulated single output, 1W dc dc converters with SIP7 PACKAGE and 3KVDC Isolation.

This series are mainly used in program-controlled switches, ATM switches, PBX, ISDN, and cellular telecommunications.

The BT4000 Series offers high-reliability true Bluetooth wireless rotary torque sensing in extreme high-vibration environments, where most torque transducers experience premature wear and failure.

The Impact-E 300 has a mobile iCore CPU, QM77 express chipset, and supports two PCIe x1 cards, one PCIe x16 and a single half-length mPCIe.

Check Out Now Our New Brochure And Find The Perfect Solutions For Your Next Connector Application!

APN-R measures the power usage of a single piece of equipment, an extensive machine system, an area of a plant, or an entire facility.

AIOT-X1000 ncludes support for DDR3, Mini-PCIe, Ethernet, USB device, USB host, SD, UART, I2C, PIO, SPI, JTAG, IDE, WinRiver Linux, CAN Bus, PAN (Wi-Fi, Bluetooth, ZigBee, RFID), LAN (Ethernet, Wi-Fi), and WAN (2G/3G/LTE).

Compact X20 has 32 built-in digital and analog I/O channels and POWERLINK, standard Ethernet, CAN, RS232 and USB interfaces.

Didn't think you could have Modbus® Serial communications in a CompactLogix™ L1x or 1734 Point I/O adapter? Think again.

SignalTEK CT is a data cable transmission tester designed for installers and network owners who need to prove that copper cabling has been installed correctly and is capable of supporting Gigabit Ethernet.

The IPC932-230-FL embedded system supports LGA1150 socket for the 4th generation Intel Core processors coupled with the Intel Q87 Express chipset.

The toolkit allows third parties to create next generation cyber security solutions using the company’s Deep Packet Inspection (DPI) technology.

In version R3.12, self-diagnostic information is now displayed in a more intuitive, easy-to-understand format based on the NAMUR NE107 recommendations.

Based on 3rd generation Core i7 / i5 / i3 or Celeron processor and HM76 Express chipset, FES8660 includes DisplayPort and VGA out video interfaces, 4 Com ports, Quad LAN and 4 USB 3.0 ports for administration and software input, and two DDR3 memory maximum up to 16 GB, SATA and CFast for storage. Housed in aluminum chassis, computer is tested for deployment in temperatures from -40°F to 158°F.

Movicon11 ensures uninterrupted service and constant process control, thus preventing any loss of information and tackling any possible malfunction.

New sample protocol included for Mettler Toledo (SICS) scales and OPC UA enhancements.

Enhancements in MobileAsset v7 include iPhone, iPad and Android compatibility for tablets and smartphones.

Need higher throughput and precision? Nordson EFD's automated robot systems offer reliable dispensing of the assembly fluids used in a wide range of manufacturing processes.

The cable glands meet European ATEX directives for terminating steel wire armored (SWA) and steel wire braid (SWB) cable for control, instrumentation, power and telecommunications.

AutomationDirect adds new series to C-more Micro line of touchscreen operator interface panels.

Monitor productivity & safety, affordably. The RMI5001 converts a monitor or Flat-screen TV into a visual data display.

LC411-USBH Series makes 1000 readings per second and connects directly to a computer via USB. Price Starts at $870

Rail-mounted DC Current/Voltage Signal to Frequency Signal Converter is used to convert the input current or voltage signal (0-5V/0-10V/1-5V/0-10mA/0-20mA/4-20mA,etc) into (0-5KHz/0-10KHz/1-5KHz,etc) impulse or open collector signal. There is 3000VDC isolation among the auxiliary power supply, signal input, signal output. It is widely used in field with industrial wide temperature, humidity, vibration or adverse working environment, etc.

Your HMI solution equipped with RISC 32 bits, 800 MHz CPU. Full color screen displaying high resolution & 3D pictures. Rugged, various sizes, video input modules, CE approved & UL508 certified.

TU425 addresses the needs of all types of test equipment such as oscilloscopes, analyzers, test boards, chromatography mass detectors as well as industrial process control systems.

BMX-T510 & BMX-T520 have Intel 3rd/4th Gen Core i7/i5/i3 rPGA socket type processors, with built in Intel Q87 and Intel Q77 chipset or QM77 chipset.

All EVT vision sensors and smart cameras, such as EyeSens and EyeCheck now contain the “Statistic” command to graphically monitor and display the production line without a PC.

The camera is based on OmniVision’s OV5680, an 1/3.2” optical format, 5MP CMOS image sensor and comes with a standard 2-lane Mobile Industry Processor Interface (MIPI) Camera Serial Interface.

AEGIS series units protect single-phase electrical and electronic equipment from surges and line noise that can cause misoperation and damage.

The gauge has a simple, standard configuration that consists of an all-stainless steel chamber, and a magnetic float with an orange, magnetic shuttle indicator.

Enhancements in Version 8.6 include expanded pressure safety valve design functions, dynamic modeling of compressors, and rupture disk sizing.

The LIC 2100 encoders serve applications where very high mounting tolerances and unlimited reliability are more important than maximum accuracy.

The cables consist of 4.1/9.5 (Mini) DIN male connectors terminated onto plenum rated low PIM cables for DAS (Distributed Antenna Systems) and wireless infrastructure applications.

A trapped key system uses a series of mechanical locks and keys to control the access of gates or doors to running equipment or machines, ensuring safe access to those machines.

ISL8240M delivers up to 100W of output power in a 2.9 cm2 footprint, greater than 90 percent power efficiency, and good thermal performance. Price: $39.85

The OPC Server now supports Foxboro I/A Series systems version 8.8 and the migration of those systems to Microsoft Windows 7 & Microsoft Server 2008 R2 operating systems.

EC700-BT in-vehicle computer supports the low-power and high-performance Intel Atom processor E3800 product family.

RMETER is a battery free RFID sensor tag capable of transmitting a unique identifier and resistance measurement data--such as from a thermister--to a commercial EPC C1G2 reader.

The AD7403 provides precision current and voltage measurement in DC/AC power conversion applications.

Enhancements in Version 1.41 include precise multiple camera synchronization, two additional reference sets for Offset and Shading correction storable in the camera, and optimized handling of low resolution encoders.

The CLV610 is a compact, industrial, laser-based scanner that is ideal for short reading distances with a large reading field height.

FMD71 level transmitter measures differential pressure without using troublesome impulse lines and capillary tubes.

PMC-5151, a web-based intelligent Power Meter Concentrator, logs and displays power meter information.

GECKO 4TX switch combines the advantages of fully-managed switches with the benefits of fast and simple deployment.

EA3 series 8- and 10-inch micro-graphic touch panels are equipped with TFT LCD 800 x 600 pixel displays and a palette of 32K colors for customizing objects, screen backgrounds and displaying bitmap graphics. Prices start at $749.

PRM R3.12 self-diagnostic information is now displayed in a more intuitive, easy-to-understand format based on the NAMUR NE107 recommendations.

Four international standard signal input: 0-100mV/ 0-75mV/0-24V/0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA. Four standard output signal: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA

Optical Isolated Amplifier can be adjusted. Good anti-jamming capability, 0-10mA/0-20mA/4-20mA current signal input, 0-5V/0-10V/0-75mV/0-2.5V/2-10V voltage signal output isolation and transfer.

The 16 mm DCX 16 S and DCX 32 L are available with precious metal and graphite brushes and can be combined with a GPX 16 planetary gearhead.

The explosion proof 80 series float switch is available with three mounting options: an M16 internal mount ( shown ), a 3/4" NPT external mount and a 3/4" NPT external mount with a DIN plug.

Available in three different spring ranges, Type 95H regulators are designed to handle outlet pressures from 5 to 150 psig (0.35 to 10.3 bar) and temperatures up to +650°F (+343°C).

At less than 1 ounce in weight, Gold Twitter delivers up to 4000 W of power with advanced servo capabilities and supports EtherCAT and CANopen field-bus communication standards.

The inverters provide a single, regulated output of 115Vac continuous at 60Hz or 400Hz, or 230Vac continuous at 50Hz.

Minitek Pwr connectors are for wire-to-wire, wire-to-board and wire-to-panel mount applications to terminate AWG 16 to 30 wires.

FRB Series vane style rotary actuator provides 90°, 180°, and 270° rotation in tight spaces.

Elbow Flow Conditioner removes swirl and asymmetric velocity profiles caused by pumps placed too close to a mag meter.

IAP4-20ma signal isolated converter contains current signal modulate-demodulate and isolated coupled circuit.

The Automation Interface in TwinCAT 3 automation software enables remote control of TwinCAT engineering systems and the automatic generation of programs and configurations.

AF Range contactors range from 4kW/5hp for small motors, to model AF2650 for high-power switching, ABB's largest single-case block contactor.

GPS-721-MRTU can be used with Modbus RTU based control devices and SCADA software for precise timekeeping and time measurement.

Available with 15, 17, or 19 inches LCD screens with resistive or GTG touch screen options, APS series features easy-to-clean stainless steel construction that is corrosion resistant and conform to IP65 rating, offers a perfect solution for the food and pharmaceutical markets.

Optical Isolation Amplifier Module

4-20mA/0-10V signal isolated splitter/isolated amplifier, DIN35 Rail-mounted

One In/One Out PT100 to 4-20mA/0-5V analog signal isolated converters/transducer/temperature converter/thermal resistance converter

WAYJUN Analog Current signal to RS485 or RS232 Converter. Slim-line plastic housing with integral 35mm DIN rail mounting, LED indication and terminals,power supply (8-32VDC).

The suite connects Aptean's Ross ERP, Factory MES, Analytics for Process Manufacturing, and Pivotal CRM software.

The TC55 Android-based touch computer is available with or without Google Mobile Services (GMS). The Professional TC55 does not include GMS and prevents data gathering of user location, keypad entries and search activities by Google.

View 10 combines RFID, infrared and WiFi communications to drive real-time intelligence to operators at the point of assembly while returning advanced analytics to plant management.

The HEC connector with IP68/IP69K rating is able to withstand high pressure and high temperature wash downs and resist UV, acidic rain, saline mist, ozone and other pollutants in the air.

Use IVC's Longwatch camera management software to correlate saved video from our industrial cameras with historical SCADA data for better process analysis.

The CQ4 has a high switching frequency up to 100 Hz and a sensing range of up to 8 mm, making it ideal for high-speed object detection through non-metallic surfaces.

8-bit U5309A and 12-bit U5303A PCIe high-speed digitizers now have an averaging real-time processing function that reduces random noise effects.

Cyberex PowerBuilt UPS has an amplitude detection control design resulting in faster, more accurate fault sensing for system reliability and critical load protection.

eBOX635-881-FL comes packaged in an IP40-rated aluminum and cold-rolled steel enclosure and is designed to operate at temperatures ranging from -20°C to +50°C for use in extreme environments.

Port released Version 4.5 of CANopen Library and version 2.3 of CANopen Design Tool.

Designed for a temperature range between +60 and +100°C, TGM 05 sensors open a contact if a pre-set temperature is exceeded.

Ideal for use on the power input of VFDs and other 6-pulse drives, the Matrix AP filters help customers meet IEEE-519 requirements for harmonic distortion, regardless of power load.

DRV5000 sensors include digital latch, digital switch and analog bipolar output options for such diverse applications as brushless DC (BLDC) motor control, industrial valve and damper position sensors, speed and position control loops, and flow meters.

The BIS-3922 allows bottom access to a 3.5" HDD bay, mSATA slot (mini-PCIE) and RAM slot for easy installation and maintenance.

By combining power-efficient processing capabilities of the ARM Cortex-A9 architecture, 3D and 2D graphics, as well as high-definition video, the FS700 module provides multimedia performance.

UltraRail system eliminates aisles and converts the end of each lane into an active storage and retrieval position. Each lane can hold up to 10 positions or more.

Delivering up to 97 percent efficiency, the 9900C three-phase UPS substantially reduces operation and cooling costs and is ideal for large data center applications.

ARGUS perimeter security system consists of networked wireless sensors that form a protective, invisible trip wire for enhanced situational awareness.

EtherNet/IP communication package may reduce 30 hours of programming to 8 minutes

SM35 sensor ICs are ideal for battery powered applications where previously only reed switches could be used due to very low power requirements and large air gap needs.

The R2100 combines Pulse Ranging Technology (PRT) with Ultra-IR LEDs and Multi-Ray Scan to deliver two-dimensional measurement over an entire area.

Extend your Ethernet network in difficult-to-reach locations with the new ultra-long range Elpro 450U-E licensed and license-free Ethernet modem.

This metal housed inductive sensor has a ceramic sensing face making it an excellent choice for applications with weld spatter, metal debris and vibration.

PICO121 with ultra-low power AMD G-Series Embedded SoC GX-210JA dual core is built to withstand wide temperature conditions, ranging from -20°C to +70°C (-4°F to +158°F).

DW-WIFI measures and records up to 1,000,000 temperature and/or humidity readings and shares recorded data with any PC or server on the same Wi-Fi network.

The flex element in CD couplings provides electrical insulation while protecting mechanical components from system overloads.

G3111-HSPA IP connects existing Ethernet and serial devices, such as PLCs, flow computers, vision systems, RFID readers or encoders, to a 3G cellular network.

T-Series inclinometer measures slope or tilt angles of an object with respect to gravity.

Har-flexicon discrete wire-to-board connectors and terminal blocks for pluggable single conductor wiring of I/O signals are available in two main pitch categories.

DL6230 demodulator offers up to 10 times higher resolution for the capaNCDT 6200 integrated capacitive measurement system and connections via EtherCAT.

CPT modules are compliant with DOSA 16th brick footprint and interface standards, have a input voltage range of 9 to 36 VDC, and provides 2250 VDC input to output isolation.

MMP-T32 motor controller has low voltage circuit breakers and thermal overload relays to protect the motor branch circuits from overload or phase loss during short-circuit conditions.

OMP171 provides multiradio capability across Classic Bluetooth, Bluetooth low energy and WLAN with full dual-band support for the 2.4GHz and 5GHz radio bands.

AD9625 A/D converter provides noise and dynamic range performance for better receiver sensitivity along with the ability to discern smaller signals in the presence of noise, clutter, blockers and interferers.

AD9680 is a dual-channel, 1.25-V, 14-bit, 1-GSPS AD9680 A/D converter for direct RF sampling in communications and instrumentation applications.

The A310 ex can be installed in classification zones 1, 2, 21, and 22 to monitor equipment, assets, and processes for heat issues and fire detection in potentially explosive environments.

The UKJ-W2.5/TC screw clamp thermocouple terminal blocks are low voltage temperature measuring DIN rail mounted terminal blocks utilizing 1 amp/55 volts of power and measuring only 10.4mm wide.

Enhancements in MuraControl 3.0 for Windows include the ability to render HTML5 feeds such as social media and the ability to add multi-lingual Unicode text overlays across individual source windows or the entire video wall.

The valve features a blowout proof stem for added safety, reinforced PTFE seats and seals for longer life, and a 316SS (ASTM CF8M) ball for better performance.

UI-5360CP and UI-5370CP have CMOS sensors with resolution of up to 2048 x 2048 pixels, excellent light sensitivity and rapid frame rates.

With TPI vision sensor, micro defects on different small sized turned parts can be detected and the bad parts can be sorted out of the production line.

Suitable for media temperatures between -50 and +1,000°C, TGM 025-03 stainless steel temperature sensor is designed to monitor hot gases.

CIGS SolarPaq is a dedicated temperature profiling solution for the vacuum coating process used in the manufacture of copper indium gallium selenide (CIGS) photovoltaic panels.

The end-to-end data management and 3D visualization platform provides organizations with a strategic tool to control sensor and machine networks using a simple point-and-tap interface on any mobile device.

The kit includes everything necessary to clean lenses, mirrors, and windows in the field, including CO2 laser optics.

MINI is a Quad Core Industrial Computer housed in a rugged steel enclosure with multiple Din rail options.

VN-300 combines 3-axis accelerometers, 3-axis gyros, 3-axis magnetometers, a barometric pressure sensor, two GPS receivers, and a micro-processor into a rugged aluminum enclosure about the size of a matchbox.

LST-E Series linear stages offer high load capacity and a variety of different options for lead screw pitch and travels.

Ethercan Light HS enables data from any CAN product or system to be accessed over the Internet, via an Ethernet equipped PC.

Fluke Connect allows maintenance technicians to wirelessly transmit measurement data from their test tools to their smart phones for secure storage on the cloud and team access from the field.

JetBox 5300-w is equipped with 2 LAN ports and 4 serial ports (2 x RS232/422/485 and 2 x RS232) with “Serial to Ethernet (ser2net)” supported.

The circulator pump delivers 40% higher pressure to provide heating coverage for a wide range of building sizes and 30% higher flow rate for faster heating.

The DAC8760 family provides simultaneous voltage and current outputs, giving system designers the flexibility to use either one or both outputs.

Leddar™ (Light Emitting Diode Detection and Ranging) is a novel detection and ranging technology created by LeddarTech that performs time-of-flight measurement using pulses from visible or infrared LEDs.

The Leddar™ Sensor Module can be integrated into any detection and ranging system, enabling developers and integrators to make the most of Leddar™ technology with unmatched flexibility thanks to its compact size and low weight, ease of integration, low power consumption, and high reliability.

M12CM series of M12 cables have compensated connectors, M12 field mountable connector sensor end, compensated thermocouple cable, sockets and pins, and two cable insulation options. Price: Starts at $35.00

The inverter systems are suitable for industrial applications where a 10kVA, three phase AC voltage solution is required.

DT9844 high speed DAQ module provides 32SE or 16DI analog input channels, 32 DIO, and 5 counter/timers that can be synchronously with the analog input data.

Enhancements in TopView 6.18.1 include real-time value and alarm updates for the Mobile Web App, and audible text-to-speech alarms.

Series TSF-DF gives a visual alarm and switch output when a process has reached a high temperature limit.

ANA2 Resolver Interface integrates a network connection and expansion capabilities to provide a resolver feedback solution for any PLC-based system.

ETH-DIO-48 for control and monitoring applications features 48 or 24 industrial strength TTL digital I/O lines. Prices start at $179.

The boards offer up to 500 kS/s sampling, eight or 16 digital I/O, and up to two analog outputs, and are priced from $189.

These include limit, magnetic, inductive, foot,-operated, pull-wire, pushbutton, selector, and key-operated designs.

Target applications of eXtremeDB database running on ThreadX include industrial controllers, sensor networks, and other embedded technology needing a small hardware footprint.

MPU-400CS provides 400W of output power with high power density; active power factor correction; full safety approvals; robust filtering and compact construction.

FLOWcloud lets users access Flow-Cal applications on demand through a web interface.

CS328A-FRA Frequency Response Analyzer consists of a PC-hosted oscilloscope and spectrum analyzer with a built-in 65MHz isolated signal generator and PC based application software.

Programming station gives operators the ability to program away from noise and distractions of the shop floor, and can prepare trainees to skillfully and safely operate lathes.

SBC-Duo has modular I/O, quad-core CPU performance, and compatible PC architecture.

PRP-260 Series of highly efficient, pure sine wave inverters provide up to 260W of power in a compact chassis-mount package.

Unmanaged Ha-VIS eCon Ethernet switches enable expansion of existing network infrastructures, as well as the development of new industrial networks

Embedded in the standard speed control loop for the ACOPOS drive family, repetitive control adjusts the torque setpoint of the drive in a way that drastically reduces the periodic portions in the speed or following error.

Designed to provide maximum safety, HIQuad solutions are an ideal choice for small and mid-size safety-critical applications requiring high levels of process availability. H41q/H51q systems provide proven performance.

The transmitter has internal dip switches to select the temperature engineering units and whether the transmitter outputs humidity or dew point.

Enhancements in v3.0 include CalPac metering software to automate flow measurement calculations and data processing, including gas and liquid calculations, measurement uncertainty, and meter factor trending.

The APX-120N5 is a preconfigured pair of units designed for rapid deployment in wireless bridge applications.

HIMatrix solutions combine one of the world’s fastest safety controllers with the fastest safety bus, safeethernet.

Professional FSM is an extended quality management system that leads to a reduction in systematic failures.

CliQ II DC-UPS module supports 24V system with up to 40A output and back up time of 4.5 minutes for 15AH battery capacity.

Danalyzer 370XA is designed for continuous online analysis of natural gas for applications such as custody transfer, power generation, and burner fuel/air ratio control.

Grounding cables and clips prevent the generation of electrical sparks caused by static electricity, which can damage equipment and lead to safety hazards.

Explosion-proof tachometer generators convert rotational shaft speed inputs into a linear analog voltage output to support predictive maintenance requirements of oil and gas drilling, industrial mud pumps, and waste and wastewater pumps and systems.

Rev. 4.9c of DevCom2000 Smart Device Communicator Software for HART instrumentation adds HART-IP functionality.

The camera allows warehouse personnel to view pallets remotely, increasing safety and accuracy in product storage and retrieval, while adding efficiency to warehouse and distribution center operations.

The xPico Wi-Fi Shield supports simultaneous wireless LAN client connectivity and access point (AP) functionality. Price: $59.

Proficy Historian IPC data collection and analytics software uses the Industrial Internet to connect machines and turn masses of raw data into actionable information.

The trunk cables are flame-retardant, UV-resistant and can be used for replacing copper with fiber to the antenna in wireless applications.

PW-82535N0 provides trapezoidal motor commutation and PWM switching, and can operate in either torque or nested speed/torque control modes using Hall Effect sensor feedbac

For trajectory planning, sophisticated motion control tasks with a current controller clock speed of 100 kHz and an effective communication cycle time of 100 μs can be achieved with a suitable EtherCAT master.

The 3395-32 and 3394-32 hoses are reinforced with Kevlar and rated for up to 5,000 pounds per square inch (psi) working pressure.

u-remote provides hot-swappable slices, an integrated self-configuring web server interface, and ProfiNet, EtherCat, Modbus TCP and Ethernet TCP/IP connections.

These IP67-rated sensors are equipped with LED status indicators and have either an attached two-meter output cable or an M12 quick-disconnect connector.

ATS Series AC Current Sensors have a built-in digital display that provides a quick visual indication of where the contact changes.

When used with the Leica Absolute Tracker AT901, the Leica T-Scan 5 captures hundreds of millions of accurate points on virtually any surface, from a black matte to highly reflective, even carbon fiber.

The closed upper surface of these plastic chains guarantees the safe transportation of individual items and workpiece carriers in conveyor systems.

IndraDrive CL/ML drives are rated from 110 kW to 4 MW for applications in metal forming, plastics, test, printing, metallurgy, marine, offshore and other heavy industries.

Tri-Fitt fittings are for very high pressure UHPLC and HPLC applications that require no leaks at pressures at or above 20,000 psi.

Version 4.6 has enhancements for the Life Sciences (Pharmaceuticals and BioTech) and supports Manufacturing Execution System (MES) applications.

Other industrial Ethernet systems supported include EtherNet/IP, Profinet IO and MODBUS+ Ethernet TCP.

Export-Events feature for CyTime Sequence of Events Recorders, models SER-3200 and SER-2408, make it easy to share event data with Microsoft Excel or other software.

Vert-X 1600 Series sensors measure 0 to 360° with full resolution and accuracy at programmed electrical angles

Coupler enables a PROFINET controller to exchange data with EtherCAT, PROFINET and PROFIBUS systems.

Lexium MDrive Profinet products integrate easily into new or existing systems and equipment, facilitating faster implementation and reducing total cost of ownership.

Wireless Gateway transforms the wireless signal from any Dwyer Instruments universal handheld probe or module into Bluetooth Wireless Technology.

CBS II robotic Cartridge Bell Paint System for internal charge waterborne painting reduces color change time as much as 50 percent when compared with the company's other solutions.

PMI40-F90-U-V15 and PMI40-F90-I-V15 sensors offer a 40 mm distance measurement ideal for vertical valve measurements.

EL7201 integrates a complete servo amplifier for motors up to 200 W in a compact High Density (HD) terminal housing with one EtherCAT cable.

Enhancements include a USB interface, a smaller housing, and connectivity to CC-Link IE Field.

The Han-Yellock 10 can fit both rectangular and circular panel cut outs, allowing direct replacement of circular connectors with a panel cut out diameter between 28 – 30mm.