Industry Products

Pyros-TGT2-DWB is an RFID sensor tag capable of transmitting a unique identifier and the associated temperature measurement data to a commercial EPC C1G2 reader without the need of a battery on the sensor tag.

The RapID Platform PROFINET IRT Network Interface supports PROFINET v2.3 and provides cycle times down to 250 µs.

The LE550 sensor provides accurate measurements from 100 to 1000 mm on a wide range of challenging targets from black rubber to shiny metal.

These turnkey projected-capacitive controllers make it easy for designers to add contemporary touch and gesture interface designs to touchscreens and touchpads.

EyeMIO Extended PLC I/O Module provides an interface between the image processing system and programmable logic controllers.

Enhancements in Version 12.5 of AMS Suite: Intelligent Device Manager makes commissioning FOUNDATION fieldbus devices faster.

HD310-Q87 is based on an Intel Q87 chipset with 4 DDR3/DDR3L DIMM sockets that support up to 32GB.

A15VSO hydraulic axial-piston pump for stationary applications in open circuit operation can meet pressure requirements to 420 bars and recover potential energy during pump/motor operation almost completely.

Updates in Version 7.3 support process optimization, helping users set up heating and cooling processes, and support for OPC data communications.

The Datapaq in-process profiler passes through the process chambers along with the product being measured.

IKM 122 Ex-24 amplifier conforms to the current standards for use in hazardous areas according to ATEX directive 94/9/EG.

The FAG SmartConnectBox power supply enables easy distribution of power supply inputs and outputs to a maximum of four FAG SmartCheck online condition monitoring devices.

ACEX-4600 COM Express carrier cards reduce system design time by providing a rugged host for Type 6 CPU and PMC/XMC modules that is ready for use in extreme conditions.

Enhancements in version 11.4 include diagnostic and OPC-driven communication management functions.

Tropos 1410-DIN is suitable for installation in process control, energy and industrial automation systems and can be installed in enclosures using standard DIN rail mounting.

The light fittings are suitable for installation in hazardous gas (Zone 1 and 2) and hazardous dust (Zone 21 and 22) areas or harsh industrial environments.

The 500W and 600W models are sealed in a heat conducting potting material and feature a wide temperature range of –50ºC to 85ºC.

Designed for use in close proximity to cascading or multiple pump arrays, this meter achieves ±0.5% accuracy under the most severe swirling flows.

A non-contact solution, ERO 1200/1400 encoders are suited for motion control on dynamic stages and machines in automation or semiconductor industries, such as pick and place machines.

Mencom Corporation Introduces Solenoid Valve Connectors at IMTS-The International Manufacturing Technology Show 2014.

Support for the USB3 Vision camera interface standard lets MIL users take advantage of USB3 Vision cameras on Windows 7 and Windows 8 imaging systems.

The 5 megapixel GigE board cameras are characterized by their compact PCB design (45 x 45 x 20 mm) and Power over Ethernet (PoE).

Using High Voltage CMOS/DMOS technology, UDH0357AQ actuates one biaxial or two uni-axial MEMS Micro-Mirror for portable miniature projection display engines in mobile and automotive applications.

The AGS series Heavy Duty Pneumatic Powered Slides provide smooth linear motion and have a built in air cylinder that reduces the overall length or footprint of the unit.

Advantech's ADAM-6200 Ethernet modules are designed with daisy chain networking, remote monitoring, and group configuration capabilities.

RTR-601 Wireless Handheld Thermometer measures the internal temperature of food items and liquids using an insertion probe.

XFM and DFP fluorescent fixtures for explosive atmosphere locations, features different ½-inch NPT hub entries on each end to provide installers with options for various lighting angles.

Flexible-boot cable assemblies optimize cable routing and support low profile installations where cabinet doors or front panels might interfere with traditional straight style bend limiting boots.

WEG CWC's compact dimensions for its IEC current rating, up to 22A, AC-3 utilization category, allows it to take up less space inside electrical enclosures while still offering up to 15 hp @460V. Prices start at $11.

The internal measuring frequency is now user selectable and can be as high as 5 kHz resulting in accurate measuring speeds of 5 meters per second.

IFS 2405 measures the exact thickness of multiple layers of different transparent materials, such as laminated safety glass, solar panels and flat screens.

Verification Reflector is designed for applications requiring periodic transmitter integrity tests to ensure that the level measurement device functions correctly and overfilling will not occur.

Ocean Extrusions is a leading plastic extrusion machinery manufacturer in Ahmedabad, India.

Fractional HP DC motors and gearmotors are UL, CSA and RoHS compliant, IP40-rated, and feature reversible design and dynamically balanced armatures.

Version 3.8 automates multi-helical and variable flute grinding, as well as providing a new form cutter function for profile inserts.

SDN 40-24-100C is a 40A single-phase power supply specially designed to meet the needs of users running large industrial loads using single phase power.

RTDM12 RTD temperature sensors are rugged with a molded (IP67) 4-pin connector with M12 male thread and a fast response time. Price starts at $33.

Modular version of the four-port IE-iMcV-MultiWay Ethernet Media Converter can be installed in AC or DC internal-powered chassis.

EA9 color TFT touch screens are available in 6, 8, 10, 12 or 15-inch versions. Prices start at $499 for the 6-inch base model (without Ethernet).

ACS-2160 features an operating temperature of -20°C to 60°C, supports 5G vibration, 50G shock and drops from 92cm in order to meet tough requirements in harsh environment applications.

By integrating Prestige and VisionPRO 8000 thermostats with WEBs-AX, building owners can cost-effectively expand their system to include energy management and remote monitoring.

CN38S temperature controllers are easy to program and feature an input for thermocouple, RTD and thermistor sensors. Price starts at $105

Enhancements in version 7.2.g include explanations for why it makes control adjustments and a Data Pattern report that indicates the existence of combinations of adjustments.

This IP 67-rated ranging scanner sends information about surrounding contours via Ethernet using time-of-flight technology.

we can supply original , compatible and used PLC parts, HMI, industrial control competitive prices, programming ,installation, complete projects

Enhancements in Version 7.3 include support for the real-time export of data via OPC (“Open Platform Communications”).

For use with the Lenze Smart Motor, g500 gearboxes enable efficiency of over 94 percent across the entire transmission range.

The three USB 3.0 cameras are available in housed and board-level versions, with a choice of e2v 1.3MP, 2MP and Aptina 5MP CMOS sensors.

The cables feature a stainless steel coupling nut and stainless steel armor jacket which prevent water damage from high pressure washdown, cleaning chemicals and extreme temperature.

Fusion4 MSC-L multi-stream controller is used for loading products from refineries and chemical plants into transports such as railcars, tankers and barges.

HP70 Pick-and-Place direct-drive component achieves over 100 cycles per minute with repeat accuracy of 0.01mm.

The Media Converter helps companies upgrade their Allen-Bradley Remote I/O systems to run Remote I/O and EtherNet/IP data simultaneously on existing Blue Hose cable.

ATOM non-contact optical linear and rotary incremental encoders combine miniaturization with dirt immunity, signal stability and reliability.

These meters are offered with interchangeable direct reading scales for Air, Water, Argon, Oxygen, Carbon Dioxide, Nitrogen, Helium and Hydrogen.

Logger 30 detects and records transient surges over 50A in ground circuits of industrial control systems.

Optical Cable Assemblies require minimal cleaning and deliver repeatable, error-free optical transmissions for petrochemical plant, mining and offshore systems.

Model DDM-01 offers quick measurement of distances up to 229.7 feet (70 meters) with the click of a button.

ServoNavi uses the weight of the part/workholding to control servo control accuracy on Okuma double column, vertical, and horizontal machining centers.

TC8610 connects up to four serial devices over existing T1/E1 links, making it suitable for SCADA and protective relay communications in power utilities.

Enhancements in VAC include a phone-type, alphanumeric keypad and a larger, more versatile display for use on forklift trucks.

Granit 1280iFR scanner reads barcodes from short and long distances, improving worker productivity in the distribution center and cold storage environments.

Dematic iQ addresses all fulfillment center business processes with functional modules and cloud offerings.

TT239 provides a process current output proportional to the frequency of a pulse or waveform input signal. Price starts at $175.

The IST8303 is an integrated chip containing 3-axis magnetic sensors with an ASIC controller.

The Data Logger connects securely to a centralized historian and transfers data to it, even in low bandwidth or unreliable network conditions.

SeaRAQ 8520 and 8521 boards interface to a variety of real-world I/O and all boards are isolated to prevent damage from harmful surges and ground loops often found in industrial environments.

EyeSens Weld profile scanner measures the elevation profile of the weld seam by projecting a laser line onto the object. The laser line profile is then captured by the integrated camera.

The modem is registered by the HART Communication Foundation (HCF) to meet the HART Protocol Specifications.

ECT emulates a MicroLogix 1100 B soft PLC which can read in control code, link to the model and run faster than real time, allowing testing to be completed faster than was previously achievable

The Series UFM can measure velocity and flow in steel, copper, plastic pipes with outside diameters ranging from 0.98 to 4.62” (24.89 to 117.35 mm).

Shad-o-Box 3K HS and Shad-o-Box 6K HS cameras are suitable for industrial X-ray inspection, scientific imaging, and non-destructive testing, including Printed Circuit Board (PCB) Inspection, Microfocus Computed Tomography (CT) and small-animal imaging.

Pipe Checker hand tools measure Hi-Lo gaps in SCRs (Steel Catenary Risers) and other fatigue-sensitive pipes.

SyncView is a real-time visual factory information system that provides a dynamic view of what is happening at every stage of the manufacturing process.

AG Series cast iron centrifugal pumps are intended for water transfer applications in industrial, commercial and agricultural markets.

The ExN 400 encoders are certified for operation in hazardous areas Zones 1 or 21 of equipment group II (above ground applications).

Series MCS miniature current switches are suitable for monitoring the current usage in fuse boxes and small control panels.

The ESBF cylinder is capable of generating almost two tons (17,000 N) of feed force, making it possible to use in place of a hydraulic cylinder.

SyncOperations collects and analyzes data from both the machine level and from company systems (ERP and CRM, for example) to monitor and synchronize data from all equipment and processes in real time.

CPE1U48 is an open frame eighth-brick DC-DC converter that operates over an input voltage range of 36 to 72 Vdc, and provides a tightly regulated output voltage with an output current rating of 1.25 A.

Dataflow allows DGBox users to create logic sequences, connect and command all devices, objects and operations as “smart blocks” with inputs and outputs without having to write any script.

For use in harsh environments, the enclosures meet minimum exposure IP66, IP67 and IP68 for protection against jets of water and full submersion.

PES-A and PEW-A dome signal lights are available in blue (1600 mcd), red (1800 mcd), amber (2000 mcd) and green (3700 mcd) with durable acrylic resin domes.

The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. This dryers which made by us are fine crafted, low energy consumption and ease to operate.

It’s ideal crushing machinery for the medium hardness and fragile materials which compressive strength under 200 MPA, calcium content greater than 40%.

Ball mill is a type of grinder, is a cylindrical device used in grinding (or mixing) materials like ores, chemicals, ceramic raw materials and paints. There are dry and wet grinding methods can be use according to the materials.

LSM Series three ring ultra-fine grinder mill is used as fine and ultra-fine powder processing equipment, it is mainly used for processing materials which moth’s hardness is under 6 such as calcite, chalk, limestone, white clouds stone, kaolin, bentonite, talc, mica, magnesite, illite, and etc... Material hardness level will determines the length of the wear parts and the service life of the machine.

The design principle of XS sand washing & dewatering machine is to maximize the productivity and profit of sand making site. Other purpose is minimized the operation cost and the environmental pollution which caused by the excess emissions of fine sand.

LZ environment friendly sand recycling & washing machine The design principle of LZ sand recycling & washing machine is to maximize the productivity, cleanliness, recycle rate and grade of sand during the sand washing procure. Another purpose is minimized the operation cost and the environmental pollution which caused by the excess emissions of fine sand.

It widely used in construction sites, gravel plants, concrete hydropower dam site, precast concrete plants, and the filtering of glass quartz sand.

Mobile crusher station is mainly used in the industries which often need to relocate the workplace, especially highway & railway construction, hydropower projects and other small quarry operations. Users can setup the mobile plant according to the situation of the site by using proper configurations.

XSD Series wheel sand washing machinery is widely used as washing, selecting and dehydration for the construction site, gravel plant, concrete factory and other related industries.

This machinery can be widely used in medium and fine materials crushing & shaping operation for mining , glass, sand making, quarry and other industries.

VSI series impact crusher is fully upgraded by our R&D team from traditional vertical shaft impact crusher. This machine is ideal machinery for particle shaping and widely applied in civil construction, concrete mixing stations and other fields.

This screen bars on the machinery has circular movement track, it is high efficient screen for filter materials into multiple grade according to screen. It is ideal screening device for pre-filter & feed materials in the quarry site, it also can used as filtering & feeding materials solely. In order to screen, the machinery is driven by motor and V-belt, it vibrates periodically to move the materials constantly on the surface of the screen.

This crusher can be use in mining, building materials, metallurgy industries. It is ideal medium and fine crushing plant for iron ore, copper ore, granite, basalt, cobblestone, marble, limestone and other medium or upper level hardness materials.

JC series jaw crusher is the most popular primary crushing and screen machinery. This prototype not only retains all the advantages of PE series jaw crusher and it has adopted many advanced crafting technology on itself. JC series jaw crusher is definite ideal crusher for hard and strong abrasion materials.

The machines can feed and rough screen materials into the production line with chunk and granulate materials from storage silos continuously. It widely used in metallurgy, building materials, coal, mineral processing industries.

This motor is available with a matching BD series brushless DC drive (BD10-I7-AH).

The automated seal and o-ring assembly tool is ideal for small to large O ring placement applications.

Digital Bar Graph Meters are available in vertical or horizontal orientations, with optional relay outputs, and offered with 0 to ±10VDC or 4 to 20 mA signal inputs.

ASC switches combine a current transformer, microprocessor-based signal conditioner and limit alarm contact for use in status monitoring or proof of operation applications.

The outdoor access point provides WLAN client access in mesh and backhaul client connections.

M580 Ethernet PAC uses open Ethernet standards with cybersecurity provided through its Achilles Level 2 Certification.

XT1230 and XT1240 provide a 16-channel interface for single-ended analog current or voltage input signals with Ethernet/IP, Modbus/TCP and Profinet interfaces. Price: $595.

NA570 1U rack-mount network appliance has 4th Generation Intel Xeon E3-1275 v3 or E3-1225 v3 processors with Intel C226 chipset.

Applications include current, voltage, or temperature measurement, standard signal conversion and doubling, signal isolation to avoid failures, and set-point monitoring.

Enhancements in version 1.7 of PCAN-Diag firmware include two different display modes for multiplexer variables and improvements in the busload diagram.

The seven IP65-rated Panel PCs provide a variety of storage options such as eMMC onboard, an SD/MMC slot for extending extra storage and 3G modules.

FMR5X radar level transmitter can measure level or volume of liquids and bulk solids products in metal or plastic tanks, stilling wells or other vessels up to 131 feet high with accuracy up to ±0.078 inch.

EMB-KB1 has an MD embedded G-Series SoC processor, up to 16 GB of memory, and combines the I/O controller onto the same chip as the APU.

UNIGATE EL gateways cover fieldbuses and Industrial Ethernet systems such as Modbus TCP, Profibus DP, MPI, DeviceNet, CANopen, POWERLINK, EtherCAT, PROFINET and EtherNet/IP.

Din-Mon energy meters integrate with Building Automation Systems and help building owners and managers monitor, measure and reduce energy costs.

This linear actuator provides small precise movements, light weight, low power consumption, high performance and a customized mechanical design in a 0.8” diameter package, suitable for spectrometers.

P-736.ZR consists of large aperture piezo stage and a digital controller for imaging and fast focusing applications.

FCQN is a repairable NFPA Interchangeable cylinder line that comes with magnetic pistons for position sensing.

T122 Box PC has a replaceable Mini-ITX motherboard for reliable operation in factory automation.

HD620-H81 uses an LGA 1150 socket to support the latest 4th Generation Intel Core processors and comes with 2 DDR3/DDR3L DIMM sockets supporting up to 16GB system memory for faster communication.

ValveMate 9000 dispenses precise, accurate, and repeatable amounts of the adhesives, lubricants, and other assembly fluids.

The solution consists of three parts: An FPGA-based analog digitizer module, a PC-based host controller plus an optional firmware development kit to allow customization.

Version 5.14 features added support for Liquid EFM, as well as performance and usability improvements for Allen-Bradley ControlLogix, Siemens TCP/IP Ethernet, and the DataLogger Plug-In.

PASCAL Ci4 intrinsically safe pressure transmitters come with certificates of explosion protection issued in compliance with both the ATEX and IECEx standards.

Data-as-a-Service SkySpark hosted cloud solution makes it easy for building system integrators and automation contractors to deliver the benefits of analytics and building diagnostic data to their customers.

SMARC-T335X computer-on-module (COM) is built on a TI AM3517 System on Chip (SoC), using an ARM Cortex-A8 processor at 600 MHz, 800Mhz or 1GHz.

360° SIMS enable full surface inspection and critical features measurement of up to 100 per cent of the produced car bodies, parts and sub-assemblies within production cycle time.

LC 195M and LC 495M sealed linear encoders are available for use on machines that require a Mitsubishi interface.

PXU series. available in 1/16, 1/8 and 1/4 DIN size models, enables tighter, more reliable control over a wide range of processes, including temperature, flow and pressure.

Pro-FX precisely controls machine functions for mobile off-highway applications.

cExpress-HL COM Express Type 6 Compact size computer-on-module (COM) features a mobile 4th generation Intel Core i7/i5/i3 processor at 1.7 to 3.3 GHz with Intel HD Graphics 5000 (GT3).

CPL490 measures position/displacement with 50 picometer precision, or less then seven parts-per-million even at 15 kHz bandwidth.

IS International Services LLC launches a fully automated reporting (JHACO) across multiple vendors platforms for hospitals and government facilities.

MLX200 enables the control of robots entirely through Rockwell Automation’s ControlLogix and CompactLogix Programmable Automation Controllers (PAC).

The QMS Series 1 x 1” package offers up to 25 Watts of fully regulated output power with nominal input voltages of 12, 24 and 48Vdc.

Improvements include ingress protection from liquids and dust to the IP 69K standard, resolution to 12 bits, repeatability of 0.1°and independent linearity of ±0.5 %.

F02 complies with 2006/42/EG machinery guidelines and EN ISO 13849-1 and IEC 61508 standards for functional safety up to SIL2.

ESX-TC3 provides a digital input and digital output, two CAN interfaces, Ethernet, RS232, USB and wireless communications interfaces.

EyeSens AdBead is a vision system tool for the recognition of disruptions, slubs and contractions on adhesive beads, or if a bead is too narrow, too wide or too flat.

FRC-EP series hardware platforms for test bench applications or in the vehicle have FlexRay, CAN, CAN FD, LIN, K-Line, USB, Ethernet, EtherCAT, Bluetooth and RS232 interfaces

CmStick/IV provides software developers with secure and flexible licensing, copy and IP protection. It plugs into the USB port on the motherboard of a PC or embedded system.

OIS42 multicolor backlit 3” touch screen is ideal for compact installations where cost is a primary consideration.

ATEX certified limit switch is available with three casing material variants - stainless steel, bronze or aluminum - to suit the surrounding corrosive conditions.

Micro Motion 7826 and 7828 Incorporate a rugged and reliable tuning fork for demanding process applications such as pipeline interface detection, mineral slurry solids monitoring, and corrosive acid concentration control.

ProSoft introduces Enhanced and Lite modules for CompactLogix. The MVI69 E/L product lines were developed to provide users with scalable solutions to connect non-Rockwell networks to CompactLogix L3 and L2 control systems.

Driver integrates all of the functions of B&W Tek’s Raman spectrometers into the Symbion-DX and RX analytical instrument software suites.

MC3 Stepper Motor Controller for 2-phase motors with up to 256 micro steps supports Sercos or EtherCAT real-time Ethernet networks.

Softing's PROFIBUS Tester is designed to assist end-users to quickly locate complex wiring and protocol issues in PROFIBUS networks.

Series CDX Transmitters use a logic algorithm to eliminate the need for manual calibration.

MCR-4TC supports Type J,K,R,S & T thermocouples providing for a wide measurement range from -270°C to +1760°C (-454°F to 3200°F).

PowerStack is a 400KW to +10MW highly reliable, fully-customizable “built-to-project” Power Conversion building block.

Enhancements in Version 2.4.1 allow maintenance personnel and production system operators to access HART field devices via Profibus from Emerson AMS Device Manager Asset Management software.

EFM Suite adds liquid EFM for Flow-Cal, Logix Ethernet updates, S7 Ethernet auto tag generation & S7-1500 support, more.

FWS-7810 and FWS-7400 1U network appliances have 4th generation Intel Core processors at varying clock speeds in dual & quad core designs.

LC Series Lifting Columns offer compact, telescopic pre-aligned motion solutions.

PowerGraphiX includes predesigned graphic templates, object libraries and best-practice guidelines for the design and implementation of operator interfaces at power generation plants.

XT1210 and XT1220 provide an 8-channel interface for analog voltage or current input signals and Ethernet/IP, Modbus/TCP, Profinet or peer-to-peer communication. Price: $495.

Updates include an increased number of I/O modules, improved environmental resistance and Liquid and Gas Flow Meter Calculations.

The buck regulators down-convert the DC voltage from a power supply or battery to power multiple microprocessors and board components, at various voltage requirements. Price: from $1.45.

See3CAM_30Z10X camera is based on a 1/3” optical format, 3.0MP CMOS Image sensor and supports HD (1280x720 aka 720p) streaming at 60fps and Full HD (1920x1080 aka 1080p) streaming at 30fps.

Netbiter® EC350, a new and powerful 3G/Ethernet communication gateway with new “Remote Access” feature from HMS.

PTVS6-058C-TH and PTVS6-076C-TH high power TVS diodes for DC bus protection applications deliver bidirectional port protection that meets IEC 61000-4-5 8/20 µs current surge requirements. Price: from $12.60.

PicoScope 4824 offers 12-bit resolution, a SuperSpeed USB 3.0 interface, and an integrated 14-bit arbitrary waveform generator. Price: $2,079.

PEAD90SLF Series of single output AC/DC desktop switching power supplies provide up to 90W of power. Price: From $29.

No more worries about the complex connection work! Get ILME Kits offering a complete solution for your design project.

Earth Ground Testers speed verification of a reliable connection to earth for grounded electrical systems, helping solve power quality problems and lowering the risk of shock to users.

SLS Sealed Linear Stages have a lip seal design that keeps debris, particulate and liquid contaminants from gumming up the internal drive and bearing components.

Enhancements in EEC One include 17 languages, and an integrated dictionary function.

Enhancements in Version 5.0 include system health monitoring and diagnostics tags to enable users to easily track the status of their connections, license information, and performance metrics.

OPC Server provides secure, reliable connectivity to the Applikon EZControl bioreactor controller.

The TiM551 is an outdoor-rated ranging laser scanner. It offers up to a 10-meter range, which means a larger area can be monitored with just one sensor.

The new CX2000 Embedded PC series from Beckhoff Automation integrates leading edge multi-core processor performance with a highly modular design.

Anybus CompactCom 40-series products provide Ethernet Powerlink connectivity for industrial devices.

Roh’lix Linear Actuators convert rotary motion to linear travel and carry loads at speeds up to 70 inches per second.

EIP-2060 EtherNet/IP based industrial remote I/O module has 6 isolated digital inputs and 6 relay outputs.

SIMATIC PCS 7 AS 410 SMART is a compact process automation controller for small to mid-sized standard DCS applications.

The New Vision350™ PLC+HMI flat fascia units are ideal for the food & pharmaceutical industries for spray/wipe down aThe New Vision350™ PLC+HMI flat fascia units are ideal for the food & pharmaceutical industries for spray/wipe down applications with their IP66/IP65/NEMA4X rating.pplications with their IP66/IP65/NEMA4X rating.

By directly measuring sodium concentration rather than chloride levels, Easy Na Sodium Analyzer provides simple, fast and accurate results in food laboratories and manufacturing processes.

Overheating electrical panels? Solve your problem in any environment; indoor, outdoor, wet, UV exposure, corrosive environment, etc. Easy installation, low maintenance, satisfaction guaranteed!

Acromag’s BusWorks XT series of Ethernet I/O modules interface discrete I/O or analog input signals for Ethernet/IP, Modbus/TCP, Profinet, or peer-to-peer i2o® communication.

WEC2013 BSP supports the latest AM335x Starter Kit as well as the AM335x evaluation module.

Furnace Tracker data logger now has ten thermocouple channels, designed specifically for use in low-height glass tempering furnaces.

The EtherCAT encoders provide high-speed data for positioning and speed control with extremely short cycle times of up to 125 µs.

When an application does not require a motor to be in a caged structure, the TML and TMM motors are lighter, lower cost alternatives.

AllJoyn is a new technology from the AllSeen Alliance, a consortium driven by companies such as Qualcomm, Panasonic, LG, Sharp, Haier, Silicon Image and TP-LINK for discovering and consuming services on proximal devices.

Embedded software development solution for the ARMv8-A architecture works with the ARM Fast Model virtual platform.

IS1+ remote I/O system supports PROFINET in zone 1 and 2 hazardous areas.

HART modules are equipped with two inputs and outputs and use real-time Ethernet POWERLINK to transfer HART data supplied by sensors and actuators directly to the controller.

These small, yet rugged parallel grippers boast S-7 jaws that ride on Armoloy TDC shafts. The grippers are ideal for short stroke and high strength applications.

FCP-020 probes provide for near-infrared (NIR) process analysis of hydrocarbon process streams, including continuous 24/7 outdoor operation in virtually any environment.

Enhancements in Version 2.0 include include an expanded user interface and an improved optimization feature.

RHINO PSB series DIN rail mount single-phase and three-phase input power supplies with IP20-rated terminals are suitable for applications that require a basic DC voltage power supply.

Ascent controller combines the industry standard BACnet protocol and Tridium’s Niagara Framework for monitoring and control of HVAC systems.

IST8301C is an integrated chip containing 3-axis magnetic sensors with an ASIC controller.

NS-205AFT-T provides a 12 to 48 VDC power range for use with common power standards in industrial automation applications without external power converters.

RTC-900R has a NIVIDIA TEGRA2 1.0 GHz Dual Core Processor running the Android v4.0 operating system.

One of the chief advantages of this product line is the increased read range of a passive Tag (as much as 90' but typically 20' with most Tag and Antenna combinations).

PPC-321 is a TFT Full HD panel with projected capacitive touch technology that supports touchscreen use with gloves.

E-836.03 piezo driver provides for the dynamic operation of low-voltage multilayer piezo actuators and piezo positioning systems.

MS-T Series contactors and motor control products range from 10 to 32 amps and are suitable for panel designers and end users who are downsizing their panels.

For monitoring grounds and buildings in zone 1 or zone 2 hazardous areas, EC-740-PTZ-EX operates smoothly even in inclement weather with rain or snowfall.

The modular system now integrates up to four infrared line scanners for monitoring long and difficult-to-access kilns, and point sensors cover shadow areas.

REVO HP continuously monitors itself, raising an alarm in the event of critical fault conditions in high power applications up to 690Vac and current up to 2400 A.