Industry Products

InBound displays physical constraints such as a vessel’s Maximum Allowable Working Pressure, design constraints such as relief valve settings, and safe operating limits.

GPro 500 Tunable Diode Laser oxygen sensor incorporates a probe that reflects the laser beam back to the receiver in the sensor head, therefore alignment is never required.

Server lets wind farm operators access key performance and maintenance data from their Siemens wind turbines without relying on proprietary drivers.

Decoder board can be used as a plug-n-play to interface a NTSC/PAL camera with interfaces for both S-Video input and Composite video input (CVBS).

Outdoor Air Temperature Sensor accurately measures outdoor ambient temperatures on top of buildings or air handling units.

VESP211 Serial Servers connect RS-232, RS-422 or RS-485 serial devices to Ethernet networks, allowing the serial devices to become nodes on the network.

This device is ideal for applications requiring precision motion in a small footprint such as microfluidics and optical positioning.

The drive/controller communicates with a host PLC over the EtherNet/IP or Modbus-TCP network.

Vision system features vision tools, fast image capture, capability to power and control a range of external lighting, and enough input/output (I/O) capacity for virtually any inspection scenario.

The OM-CP-EVENT101A interfaces to tipping bucket rain gages and other devices with TTL pulse or contact closure output. Price starts at $99.

Stainless steel pressure sensors resist moderately harsh media such as refrigerants, brake and hydraulic fluids, engine oil, tap water, and compressed air.

The Venus Servo drive is suitable for the control of brushless DC, brushless AC, DC brushed, steppers and voice coil motors.

Enhancements in version 10.61 include a Performance Calculation Engine that allows users to configure complex calculations that can be triggered periodically or on any data change event.

OpenCL is an API which enables developers to take advantage of the high performance graphics cores of AMD’s Accelerated Processing Unit (APU) for a variety of non-graphical computing tasks.

H Series Pump Heads are now available with an isolation gland to provide a fluid barrier between the pumped process fluid and atmosphere.

NaviTEK II includes IPv6, PoE+, VLANs, Trace Route and advanced color LCD screen to view pin by pin wiremap capabilities that are standard in modern network deployments.

XCSL85C, XCSL120C and XCSL240C 24Vdc power supplies are available in 3.5, 5 and 10 amps.

The safety controller provides four redundant safe inputs and two independent safe electronic outputs.

With the EtherNet/IP Communications Auxiliary, users can access the status of any DeviceNet device within the network from any personal computer or PLC.

The Q42 is designed for applications that require frequent cleaning with chemicals found in food and beverage applications or where the sensor is exposed to wet environments.

Sitop PSU100L offers a wide-range input with manual switchover connection that accommodates all industrial supply systems.

Offered in single, dual, quad, 8 and 16 port versions, modules use a standard USB-B device connector for attaching to an upstream host or hub port. Prices start at $32.

Enhancements in v 10.61 include a "Virtual" meter type for calculated meters, grouping support for meter type and external data import and processing.

Model 4020 is a microprocessor controlled 3-channel signal conditioner for both charge mode and IEPE sensors.

Using HyperWare-II icon-based programming software, the IL-Mini is quickly configured for simple to complex data logging strategies.

The coprocessor card integrates a Virtex-6 FPGA computing core with an industry-standard FMC IO module on a half-length PCI Express desktop or server card.

Vitessen CPUs for FA-M3 PLCs provide scan speeds that can execute 100,000 program steps in 1 msec.

Enhancements in version 10.61 include faster data communications, expanded GraphWorX64 Object Properties, and streamlined TrendWorX64 Configuration/Runtime.

GLC-150 is available in six different models of constant current output at 2.8A, 3.2A, 3.75A, 4.2A, 5.0A or 6.25A with self-adjusting output voltage from 15VDC to 54VDC.

Designed for small cameras with a cross section between 29 x 46 and 38 x 38 mm, the enclosures provide IP67 protection.

GSM-PRO I/O module provides a remote control and maintenance solution that can signal changes at the inputs and outputs through text messages and emails.

Enhancements to the software include improvements to its Process Journal, OEE Dashboard, KanBan Scheduling Module, and Gantt Job Scheduling tool.

Diagnostic detects temperature measurement and process abnormalities, allowing users to take preventive action to avoid unnecessary shutdowns, process inefficiencies and safety issues.

Enhancements in Longwatch 5.4 include a graphics engine enabling the display of real-time OPC data and graphics embedded on the video image.

CPTXX36 is compliant with DOSA footprint and interface standards. It is available in three standard output voltages of 3V3, 5V & 12V.

Enhancements in JetSym 4.4 relate to the setup and programming of servo drives with Motion API (Application Programming Interface) in JetSym STX.

The receptacles are prewired with 18 gauge leads, which increase the rated current and voltage compared to the company's other M12 connectors.

The In‐Sight 500 vision system processes images at up to 500 frames per second (fps) with windowed acquisition.

The fanless BOX Computer BX300 series uses an energy-efficient Intel Atom processor Z530P and features a DIN-rail mountable body.

Safety light curtains are available in models from 300mm up to 1800mm of controlled and overall height.

Series DTFA Variable-Area Flowmeter for gases allows for the accurate measurement of compatible gases.

By coupling several CANblue II/Generic devices, different CAN networks can be wirelessly linked with each other.

The electrodes can be used with any pH or ORP meter and feature durable polycarbonate body construction.

Designed for multi-axis applications, the i700 simplifies machine design, build and commissioning, especiall for material handling systems.

Upgrades include 30-50 msec response time, UL listing and SIL-2 safety rating.

GalilSuite has servo tuning capabilities and multiple tuning methods making it easy to automatically tune many types of motion control systems.

CNI-CB120SB temperature control panel provides a complete control system, eliminating the need to select, collect and assemble separate components.

The 52U enclosure adapts to a variety of applications, including housing server, storage and network components.

Expansion to the NITRA line of pneumatic components includes tubing, fittings, blow guns and aluminum manifolds.

KL6583-0100 and KL6581 EnOcean transmitter and receiver modules can be installed in visible locations within buildings.

The Installed Base Audit simplifies measurement device maintenance, helps a plant conform to various regulations and safety requirements, and reduces its Total Cost of Ownership.

GPS enables the continuous localization of mobile machines such as large emergency generators or construction equipment.

Light curtains for hand protection have a maximum operating distance of 19m, controlled heights ranging from 150 to 1800mm, and a 30mm resolution.

Model 216021 has a built-in 12 dBi antenna and a maximum read/write distance of up to 15 m.

The input voltage range for the units is from 10 to 50V DC which allows them to work with 12, 24, or 48 volt battery operated or distributed DC power systems.

USB-104-HUB makes it easy to add USB-based I/O to an embedded system or to connect peripherals such as external hard drives, keyboards, GPS, wireless and more.

Dashboard enables end users to display data from an unlimited number of individual buildings to as many as 450 concurrent users.

AM8000's single-cable technology has the power and feedback system combined into one standard motor cable.

System E6.1 is narrower, lighter and quieter than the previous model.

The encoders can withstand a high magnetic environment without loss of accuracy or resolution and are mechanically stable.

System uses thermal imaging cameras to measure refractory surface temperatures in all parts of a vessel including the critical cone and dome sections.

Machines Environment design system allows precision finite-element analysis (FEA) models of motors and generators to be created and solved in minutes.

Guardian Defender guards machinery, contain processes and protects employees from robotic/machine movement zones.

The 2x35W version for fluorescent lamps is certified for use in Zones 2 and 22 in accordance with European Directive (ATEX) and IECEx standards.

Glovius runs on Windows and as an app for iPad/iPhone and Android systems, and allows users to import CAD files from multiple platforms.

These 304 stainless steel electrical cabinets provide protection from dust, dirt, oil and strong jets of water for weatherproof applications.

Inverted IPC 35 connectors can carry currents up to 115 Ampere (UL) and cable sizes of up to 2 AWG.

its spring loaded arm enables GRZ to absorb the ejector stroke of a mold. Spring loading allows individual sprues and runners to be secured prior to ejection.

The manifolds are available for Inert Gas applications for single and multi-gas filling applications.

MVS10 and MVS17 pIon electrode cartridges measure the activity of “free” Ammonium ions in environmental water, potable water and waste water.

MIPP termination panel is for cables that need to be connected to equipment such as switches, Industrial Ethernet devices and any other device with an Ethernet link.

Based on a 2-row, 1.27-mm grid, har-flex offers all even-numbered models from 6 to 100 pins that allows for optimal utilization of PCB real estate

MDrive EtherNet/IP motion system is ODVA conformance tested and will interface with many manufacturer's systems including Rockwell and Omron.

All basic motor control functions, as well as motion control and PLC features, are embedded onto this tiny drive that measures 55 x 26 x 13 mm.

PowerGap inductively supplies power and signals across an air gap, eliminating the need for cables, connectors and slip ring solutions.

With a compact frame of 0.55" and weighing only 1 oz, this tiny model allows for a space-saving end product design.

BIS-6630 has 6 USBs, 6 COM ports, 2 Gigabit Ethernet, and support for Windows 7 Embedded, Windows 7, Meego, and Linux systems.

The drives are compatible with Ethernet protocols, and have a universal encoder interfacing capability, local motion control programming, and integrated functional safety.

For long distances, S7 series has 10 bit resolution models with 500 µs response. For high speed, the series has 12 bit resolution models with 50 µs response.

Windows-based software allows automation engineers to test and monitor connections to BACnet IP devices.

With these Migration Kits, users can upgrade an Allen-Bradley PLC CPU without re-programming or re-wiring.

An adapter plate allows the smaller 36mm OD unit to replace existing size 17 hybrid stepper motor linear actuators for mechanisms requiring high force in a small package.

The robot will provide small footprint performance and lower production costs to industries requiring minimal environmental pollutants.

WLAN test solution checks WLAN chipsets and devices at signal bandwidths including 20, 40, 80 and 80+80 160 MHz for both Tx and Rx for up to 4x4 MIMO configurations.

SVAC3 includes EtherNet/IP industry-standard network communication which simplifies connection to the supplied Windows PC software for configuration and tuning.

By plugging into the PC, the scanner can read barcodes up to 160 feet away from the base by using wireless connectivity. Price: from $695.

Enhancements include up to eight Gb ports to support data-intensive Smart Grid applications.

The colors, with UL and CSA approvals, are made from PVC material with a V0 inflammability rating as per UL 94.

With a 2m sensing range, this background suppression sensor and its highly-visible red light emitter can detect objects regardless of color.

Magnum 10XTS is for large substation installations with large numbers of serial and Ethernet instruments and the need for high-speed WAN access.

Infilink-HMI provides machine builders a software package that is quick to install and easy to configure under Windows 7 and XP operating systems.

The DDM features direct drive ironless linear servomotors that provide positioning resolution to 0.1 micron (to 5 nanometres on request).

MWTC-D records over 65,000 process temperature data points and is available in standard J, K, T, E, R, S, B, C, or N thermocouple calibration.

Typical applications include handling, loading and managing plates, test tubes and microscope slides.

HMC accepts up to five plug-in I/O modules with varying configurations of digital and analog inputs and outputs.

Model RTT80 two-wire temperature transmitter has HART, FOUNDATION Fieldbus and Profibus PA protocols, dual sensor inputs, diagnostics and alarms.

VC Smart Inspect executes all image processing routines without an external PC.

Software enables building professionals to integrate devices, applications, and building automation standards, including LonWorks and BACnet.

TR-76Ui is a three-channel data loggerthat simultaneously measures and records CO2 concentration, temperature and humidity.

With a life of 10 million cycles, the Hall effect sensor is ideal for short stroke measurements in industrial applications. Price: $15.00.

TeleControl PLC supports IEC 60870-5-101 (serial transmission), IEC 60870-5-104 (TCP/IP-based communication) and IEC 61850 (substation protection/control).

PTC controllers operate from a single power supply between 5 V and 30 V and can be mounted on a printed circuit board.

The UPx Remote Device provides the ability to remotely load program parameters and run programs.

Commercial-grade modules deliver wireless connectivity for in-building or climate-controlled areas in a narrow temperature range (-10ºC to 65ºC).

Fieldbus Module 229 DeviceNet Communication Interface Module enables customers to exchange data between an I/A Series DCS and DeviceNet I/O.

The Innova-Sonic 205i is Sierra’s highest performing dedicated clamp-on instrument incorporating the latest developments in digital signal processing to offer excellent accuracy and repeatability for a wide variety of liquids. The Innova-Sonic 210i portable clamp-on ultrasonic meter has received a complete repackaging into a smaller more light weight, hand-held configuration including new brighter display and pushbuttons.

Aluminum enclosures for cameras provide a sideways viewing direction and IP66 protection.

ZSTS 2.5 pluggable connectors and ZSTK 2.5 couplings are suitable for rated currents up to 24 A and rated voltages up to 500 V.

Daughter card is based on OmniVision OV5640 HD CMOS Image sensor for AM37x/DM37x processors from Texas Instruments.

MXE-5300 enhances wireless optimization for 3G/WiFi/BT/GPS support, ideal for factory automation applications.

Meeting IEC 61850-3 and IEEE 1613 standards, the UNO-4673A is able to communicate with different devices across substations and serve as an excellent computing platform.

STE-516C features 16 universal RS-232/422/485 serial ports, supports web interface configuration, and comes with free Virtual COM software.

EtherNet/IP modules are available with 16 universal user-selectable digital inputs/outputs or 16 dedicated inputs.

The analyzers help locate, predict, prevent, and troubleshoot issues in three-phase and single-power distribution systems.

iPPC-1500 provides a digital I/O interface, and four USB, audio, two LAN port, CRT and RS-232/422/485 serial ports.

H6059 is a Qseven module based on the AMD T40E and T40R ultra low power dual core and single core accelerated processing units (APU) and the A55E embedded chipset.

Enhancements include various lengths from 145mm (5.7 in.) to 1130mm (44.5 in.), and several mounting options and bracket styles.

PK4 Series offers 4 Watts of output power in a 1.44 x 1.06 x .67 inch encapsulated case, making it well suited for small size PCB applications.

Standard input voltages of 12VDC, 24VDC, 48VDC, 72VDC, and 110VDC are inverted to adjustable 120VAC or 230VAC outputs regulated to 4% or better.

The fanless computer now has an Intel Core i5/i7 CPU, a Mini-PCIe slot with a SIM card reader for 3G connectivity, and Intel GMA HD graphics.

The unnamed pressure transducers feature ceramic, silicone, or piezoresistive sensing elements.

The SG1 provides a voltage divider output signal proportional to the position of the spring loaded measuring cable.

CBD Series has an UL94V-0 polyamide insulating body, which has an operating temperature range of –40 to +80 °C.

Enhancements in v20 of RSLogix 5000 include support for GuardLogix 5572S and 5573S safety controllers, CompactLogix 5370 PACs, and EtherNet/IP.

The electric toothed belt axis ELGA-TB-G has a flexible motor attachment and is compatible with all common stepper and servo motors.

THL Series is configured with a lightweight die cast aluminum arm, as well as less complex, easy-to-maintain gearboxes and motors.

ecoPanel series touch panels provides plant and machinery builders efficient visualisation at attractive prices.

ILME has developed two new modular inserts ideal for higher current applications where finger safe contact pins are required.

The wSeries transmitters communicate on a standard Wi-Fi network which is an ideal and economical solution for facilities with an existing Wi-Fi network as well as new installations.

CSWorks 2.1 HMI/SCADA software adds support for Modbus via an application layer messaging protocol that provides client/server communication between devices.

When driven by variable frequency drives, they have motor-only rated point efficiencies of up to 93.0 percent.

Grasshopper Express GX-FW-28S5 camera models are based on color and monochrome versions of the Sony ICX674 CCD.

852-103 and 852-104 Switches support networks in harsh process, energy, transportation and automation applications in temperatures between -40°C to +70 °C.

All-stainless steel 8mm X-Series Pile Driver extended range sensors deliver precise target control and highly reliable operation in harsh applications prone to target impact and abrasion

These devices convert the Ethernet, via an RJ45 port, to an optical port with SC or ST glass fiber connections.

QR-R-160 combines a direct drive servo motor with precision angular contact bearings for dynamic performance with high stiffness and zero backlash.

S5-TCP/IP-100 communications processor integrates any Siemens S5 PLC with TCP/IP and ISO (H1) networks and supports 10/100 Mbps speeds.

Series BYS Brass Y-Strainer is a cost effective Y design valve suited for any type of industrial application.

NEP-TX series of molten metal ceramic sheath thermocouples features a 1250 C (2282 F) temperature rating, connection head with terminal block and corrosion resistance.

R-Series sensors use the orientation of a magnetic pickup to determine angle so that there is no mechanical wear.

ArmorStart LT with EtherNet/IP ArmorStart LT with EtherNet/IP provides critical information about machine performance, allowing operators to access parameters, status and diagnostics.

This stainless steel paddle assembly is insertable from outside a bin or silo through a 1-1/4” NPT or 1-1/2” BSPT coupling.

WSN-1101 and WSN-1102 provide remote sensing for building automation, HVAC and lighting control, energy management, and industrial monitoring.

IP67 intelligent power supplies allows maintenance crews to get reliable feedback on the real time and long term status of the supply.

UNO-3072A and UNO-3074A are able to work in temperatures ranging from -10 ~ 60°C (14 to 140°F) and have shock/vibration absorbers for data storage security.

Version 5.4 provides simulation and offline programming features that enable customers to create, design and run SPEL+ programs at their desks.

The service allows customers to use VPN networks without any engineering effort and without previous knowledge of the field.

DT series combines a Hall effect sensor and signal conditioner into a single package for use in DC current applications up to 1200 amps.

PC 5 dimensions are 15 percent smaller than the original design, while maintaining the same high-performance data of the original connector.

A0230006 generates a variety of precise wave forms including Sine, Square, and Pulse over a frequency range of 40 µHz to 5 MHz.

The 786-500-D2 accelerometer for machinery health monitoring carries CSA approvals for Class I Div 2/Zone 2 areas.

PIC24F GA3 features 150 microamperes/MHz active current, as well as six DMA channels, which allow a routine to be executed with less power consumption and increased throughput.

EOS-1200 has an Intel Core i7 quad core processor and four independent gigabit PoE (power over Ethernet) ports with data transfer rates up to 4.0 Gb/s.

The LAT40-48 is a zero cogging motor with high peak force for precision positioning and actuation applications.

LV-Link 3.0 includes a comprehensive, updated Help and additional example programs to make application development easier.

The HHM8229 can perform measurements of AC/DC voltage and current, resistance, frequency, duty, capacitance, as well as continuity and diode test.

The software manages Honeywell bar code scanners, mobility devices, and consumer-grade smartphones and tablets running on Google Android and Apple iOS operating systems.

Designed to monitor current and indicate current ratings, the unit handles high capacitive loads up to 20,000 µF.

Enhancements in BatchReactor software for batch chemical reactors simulation include an intuitive graphical user interface and a thermodynamic package.

Series 820 and 870 have dip solder contacts so the connectors can now be mounted to a PCB board.

DataMan 300 is designed to handle the most difficult ID code-reading applications on even the highest speed lines.

ProLink III is a configuration, data-logging, and troubleshooting tool for Micro Motion Coriolis flow and density products.

Series H1 models now include AC output ratings up to 90 amps at 660 VAC, with available control voltage of 4 to 32 VDC.

Enhancements in Proficy Scheduler Release 4.1 for Finite Capacity Scheduling include Tool Operations, Alternate Routes and Sequencer.

Enhancements in IK5000 version 2.96 make it possible to perform 2-D and 3-D measuring tasks in the field of metrology when standard DRO products will not suffice.

Equator is capable of high-speed comparative gauging for inspection of high-volume manufactured parts.

Connectors have two 70amp contact pins to obtain a cost efficient, compact connection for high currents.

Ui28_PC2 and Ui16_R5 feature up to 28 universal inputs, high-speed pulse counters, and relay outputs.

EyeVision 2.5 UR also supports PC systems with GigE, USB 2.0 and FireWire camera interfaces

S50 sensors provide proximity, polarized retoreflex and through beam functions.

The Magnum 10C is specifically designed for power utility applications and other extreme environments.

COSY 141 has 4 Ethernet ports to connect the machine locally, a WAN Ethernet port for connection to the internet, and a serial port for serial connection of PLCs.

This miniature OEM pump provides an ideal solution for industrial hygiene devices, air samplers and more.

Sage Clear Thermal Mass Flow Meter has a bright, high contrast, display of Flow Rate, Total and Temperature in a lightweight NEMA 4 enclosure.

RG Series AC and DC solid state switching devices are an ideal solution for switching resistive, slightly inductive and motor loads, thanks to the reduced size per unit.

An On Line product configurator allows a user to select specific features including accuracy from 0.4 to 0.05%, range from 10 inH2O to 5000 psi, etc.

The MDS-45-M30-SA has a 55mm measuring range and an M30 cylindrical, barrel-type stainless steel housing.

Windows-based panel PC and remote monitor mounts directly to OEM process machinery or manufacturing equipment and interface with the control system.

MANO860 comes with two DDR3 1066/1333 MHz SO-DIMM slots with up to 16GB memory and five SATA ports with RAID 0, 1, 10, 5.

CMC-141 multi-channel PID controller has a large touchscreen colour TFT display and up to 72 digital inputs/outputs.

When fitted with InertSyst, Intertec’s enclosures fully comply with the IEC EN 60079-2 standard for equipment protection provided by pressurized enclosures in explosive atmospheres.

UNO-1140FH, UNO-1150GH, UNO-1150GHE, and UNO-1172AH received Class I, Division 2 (Group A, B, C, D) certification expanding their uses to hazardous locations.

Winters Tridicator Gauges are now rated to extend over the ASME required standard of 50° to 250°F (10° to 120°C) for Boiler Code Section IV.

Tower Lights are rated to IP65, NEMA Type 4X and 13, and UL 508 and can perform over a wide voltage range (12V AC/DC, 24V AC/DC, 120V AC, and 240V AC).

Flue Gas Combustion Analyzers are available in two versions: U Line models are designed for HVAC applications, while G Line models are for industrial applications.

Enhancements include a doubled lifespan and increased operating pressure to 350 bar.

INTEGRITY 11 has a highly optimized communications mechanism called GIPC, which is five times faster than Linux AF_LOCAL sockets.

MRD-350 broadband router provides remote access across a cellular network and uses the Internet to interconnect systems, allowing HMIs, PLCs, and other devices to communicate with each other.

GP570 integrated single SoC solution enables building cost-effective motion-enabled remote controls.

WMS uses handheld computers to record real-time purchase order receipts, inventory moves, production job finishes, raw material usage and sales order picking.

OVR DIN Rail products are approved as UL Type 4 recognized components for installation on the load side of the service equipment overcurrent device.

Featuring four analog inputs for current or voltage and four analog outputs for voltage, the module provides both control and feedback in one package.

The Intrinsic Safety feature is available on 1/4", 3/8", ½", 3/4", 1", 1 ½" and 2" CoolPoint meters.

These UV-resistant cables provide reliability in severe environment and harsh weather conditions.

DynoSpindle Model 1860 series features compact, high-speed motorized robotic spindles designed for finishing operations requiring high-precision.

Dynogrind spindle series is designed specifically for robotic grinding of abrasive materials such as glass, ceramic, composite and forged materials.

7I66 remote isolated field I/O card for PC-based control systems has up to 24 digital I/O. Price: From $57.

Auxiliary gas bottles are used for gas capacitance, in most cases in conjunction with hydraulic accumulators to extend functionality.

Embedded computer board has an Intel Atom processor N2600 or D2700 with the Intel NM10 Express chipset.

Enhancements include applications, appliances and drivers built on Tridium’s Niagara Framework.