Industry Products

UNO-2668 high-performance controller utilizes a Celeron 400 MHz grade processor and is equipped with eight isolated serial communication ports. It is fanless, robust, reliable, and priced from $1,325.

Managing mobile devices on a shop floor can be challenging, even for the best manager. Today, it just got easier. Intermec Inc. announced that Radley Corp., an automated data collection software provider, has integrated its X/DC data collection platform capabilities into Intermec SmartSystems Foundation. The addition allows X/DC users to discover, configure, backup, monitor and control Intermec data collection devices from anywhere on the network.

Accepting any 24 Volt DC source, including battery power, this robust reversible Gear Motor is rated for 61 Nm continuous torque, at 43 RPM, and 100Nm Peak. The Integrally mounted Failsafe Brake requires 24V DC Power, and features a (motor) holding torque of 15 in.-lb.

Danaher Motion introduces Version 1.3 of its NDC8 control platform for Automated Guided Vehicles (AGV). Version 1.3 couples extensive programming options and advanced diagnostics with a high degree of user-friendliness and flexibility.

The five-port IP67 Ethernet Switch has Real-time Ring™ capability for super-fast recovery. These switches are ultra-reliable and were designed for the toughest applications, including the military.

SNAP-HD-G4F6 cable allows customers to connect SNAP PAC programmable automation controllers and Opto 22 SNAP Ethernet I/O systems to plug-in, single-channel G4 digital I/O racks.

AXIOMTEK announces a cost-effective single board computer (SBC), the SBC81202, which supports mainstream LGA775-pin Intel Pentium D, Intel Pentium 4 and Intel Celeron D processors. It has a 533/800MHz front side bus (FSB), and an Intel 865G +ICH*5 chipset.

Enea announced that Bejing-based Feynman Software has integrated its MiniGUI embedded graphics tools and middleware with Enea's OSE real-time operating system (RTOS).

Emerson Process Management today introduced a new generation of high temperature sensors designed specifically for increased sensor life and greater performance in elevated temperature applications. The new generation PERpH-X line of Rosemount Analytical Models 3300HT and 3400HT high temperature pH sensors perform longer in temperatures up to 145°C (293°F).

Ethernet Direct announces alliance partnership with Network Vision Inc., maker of IntraVUE Network Management software. Husky switches now work with IntraVUE, and Ethernet Direct is the exclusive distributor of IntraVUE in Taiwan, China and throughout Asia.

GE Fanuc Automation's All Ethernet High-Availability Solution is designed to mitigate the risks of downtime, safety concerns, and reduce total cost of ownership (TCO). The solution provides the ability to manage a large number of mission critical I/O at high speed in a distributed architecture.

National Instruments announced the NI LabVIEW Toolkit for LEGO MINDSTORMS NXT. With the new toolkit, LabVIEW users can create and download VIs to operate and control the MINDSTORMS NXT robotics platform.

National Instruments announced LabVIEW 8.20, the 20th anniversary edition of the LabVIEW graphical system design platform. Engineers and machine builders can use one software tool to design and deploy industrial systems performing high-performance measurements, FPGA-based advanced analysis and control, communication to existing systems, and human-machine interfacing.

MGE power meter provides access to a host of information such as real-time trends, averages, and demand metering, allowing users maximum control of their power management efforts.

Guidance 2400 motion controllers are based on a distributed network architecture that allows the controller to be located at the point of use. It is small enough to be placed inside machines, eliminating the need for a separate control cabinet.

The low cost, HSI3000 is an ergonomically designed, hand held, light, compact, and easy-to-use thermal imaging camera, used as a detection and diagnostic tool for condition monitoring of electrical and mechanical systems and building diagnostics.

Korenix Technology JetCon 1302 industrial Ethernet converter connects 10/100BaseT(x) lines to 100BaseFX fiber, or vice versa. Providing two 10/100BaseTx ports and 100BaseFx uplink, JetCon 1302 can be best used as either a 3-port switch or RJ45 to fiber optic converter for two devices.

NEW PANDUCT PANELMAX Corner Wiring Duct is an innovative wire management product that makes more efficient use of space inside enclosures, speeds installation and reduces control panel assembly costs.

Ethernet Direct announces Husky Switch - a complete portfolio of real robust and high performance Industrial Ethernet switches ranging from unmanaged device, SNMP managed device to Gigabit Ethernet switches.

The Fluke 5320A Multifunction Electrical Tester Calibrator is designed to simplify calibration processes and improve efficiency by incorporating in a single, easy-to-use instrument the functionality required to calibrate and verify a wide range of electrical test tools.

Alpha developed a method to integrate torque and force sensors directly into the housings of its motion control solutions - from precision gear reducers to TPM integrated gear and motor products. The sensor technology allows for the most accurate measurement of torque, axial loading, and radial loading.

Online Development Inc. will be displaying several new features of their xCoupler Enterprise Transaction Module in booth 849 at Automation Fair sponsored by Rockwell Automation in Baltimore, October 25 - 26, 2006.

Bosch Rexroth Corporation has released a new brochure called Rexroth IndraMotion for Packaging – Automation Solutions for Food Processing and Packaging Machines. The new literature describes the company’s family of open, complete and scalable hardware and software solutions for integrated motion control in the packaging industry.

Sony Electronics and National Instruments today announced that the Sony XCI-SX1 Smart Camera under the Microsoft Windows XPe operating system is compatible with National Instruments NI Vision Builder for Automated Inspection (AI) software.

Pepperl+Fuchs introduces a simplex, galvanically isolated Foundation Fieldbus Power Supply - KLD2-FBPS-1.25.360 - that provides 25 V and 360 mA of supply current with minimal heat dissipation, while supporting redundant 24 V power.

The Switch Ring is extremely rugged and IP67 waterproof, has a solid re-inforced casing, an operating temperature range of –40°C to 75°C and redundant power supply with efficient protection against surges and spikes.

A new, custom contoured pad attachment for their VT-Series vacuum tube lifter that lets one person handle odd-shaped loads such as mufflers and tailpipes is being introduced by Anver Corp. of Hudson, Massachusetts.

Barry-Wehmiller Company is entering its 120th year as an industry leader in the manufacture of bottle washers and pasteurizers for the beer, beverage, dairy and juice industries worldwide.

Aerotech’s ABRS series rotary air-bearing stages provide superior angular positioning, velocity stability, and error motion performance in an exceptionally low-profile package. The ABRS is designed to meet the exacting requirements of wafer inspection, high precision metrology, x-ray diffraction systems, optical inspection and fabrication, and MEMS/nanotechnology device fabrication.

Phoenix Contact announces a major expansion to its standard function (SF) unmanaged switch line. New SFN (narrow) switches use third-generation switch technology to lower installed costs between 20 and 70 percent compared with current market offerings.