Industry Products

Powered by the new Cat® C175 centerline engine, the diesel generators offer up to 4MW of power for standby, prime, continuous and load management applications requiring a large amount of power.

ifm efector inc. announces a new line of compact, electronic pressure transmitters designed for sanitary applications. The PI Series pressure transmitter is a 316 stainless steel unit that is rated IP69K and tested to withstand high-pressure cleanings and extreme washdown conditions.

Loop Performance Snapshot adds a simple, graphical representation of loop analysis computations in PlantTriage™ software. PlantTriage™ automatically monitors plant operations 24x7, using data from existing DCS or PLC systems. The Snapshot reveals opportunities to improve both the process and the controller.

Utilizing the proven Sievers laboratory TOC measurement technology, the highly automated Sievers 500 RL is designed for continuous on-line monitoring of organics in ultrapure water for pharmaceutical, microelectronics, and power applications. It also works in environments with high or unstable conductivity waters.

ION™ Microstepping Digital Drive is a fully enclosed module that provides high performance motion control, network connectivity and amplification in a compact, easy to use package for DC brush, brushless DC or step motors. Applications include medical, scientific, semiconductor, automation, industrial and robotics.

Siemens Energy & Automation, Inc. is unveiling two new Panel PCs – The SIMATIC® Panel PC577 for industrial requirements, and the SIMATIC Panel PC 477 for rugged applications.

The 5100-02-IT uses catalytic bead technology to monitor for combustible gases (methane and others). Output range is 0-100% of Lower Explosive Limit (LEL). This detector has minimal maintenance requirements and is Factory Mutual approved for six month calibration intervals.

EISX_M, EICP_M, and EISB_M managed switches have rate limiting, port locking and overlapping VLANs to prevent any risks when interconnecting office and factory networks.

Software to support Xilinx Virtex™-4 Platform FPGAs includes the INTEGRITY real-time operating system (RTOS), PowerPC compilers, TimeMachine debugger, MULTI integrated development environment (IDE), Green Hills probe, and SuperTrace probe.

National Instruments is collaborating with Texas Instruments and Spectrum Digital to develop the TI C55X Power Optimization DSP Starter Kit (DSK), offering designers test and measurement functionality.

The Eco-Graph T display delivers a good price to performance ratio when compared to existing paper recorders, data loggers, and process indicators/displays. Instead of using six different universal mono-chrome displays, one counter/timer/status, and three different relays and their status lamps, one can simply install the cost and time-saving Eco-Graph T.

The Parani100 is a Bluetooth to IP gateway that connects Bluetooth devices to 10/100 Base-T Ethernet network. Supporting point to multipoint connectivity to seven points, it transmits data from each Bluetooth terminal to management station via TCP/IP at a rate of 723Kbit/s.

Weidmuller’s new hybrid dual level terminal block provides two separate channels that offer two distinct termination technologies in one compact footprint – a timesaving insulation displacement connection (IDC) and the proven screw clamp connection.

At only 2.13” (54mm) high, the WSI 4/2 fuse terminal is ideal for use in electrical cabinets to protect power supplies or additional critical loads.

These products are designed for use with multiple safety devices and work with many configurations to maintain the safety requirements of any system. These products cover all the routine industrial applications, such as safety door, e-Stop, switching edges, bumpers and mats.

WKF 35 Fasis 35mm2 DIN Rail Terminal Block is suitable for transportation, voltage distribution in switchgear, current transformers, and any high current or large cable application. It can handle up to 120A and 2AWG wire size.

The A230 series measures current, voltage, active, reactive and apparent power, power factor, frequency, neutral current, active and reactive energy in all single and 3-phase systems and is designed to replaces numerous analog indicators. The A230 is ideal for monitoring electric motors, ovens, and machinery for energy consumption or predictive maintenance purposes.

These modular AC outlets have been reduced in price by as much as 30%. The DIN rail mount power modules are available in single, duplex and GFI AC outlets.

The HG+ is a low-backlash hypoid gearhead with a hollow-shaft, right angle design. Its advantages include high torque and speed, gear ratios in a single stage, low noise combined with high efficiency and freedom from wear. The HG+ consequently offers a constant torsional backlash as well as perfect reversibility with all ratios.

Automation Studio™ provides standardized, open data management with XML. The software is used to configure, program, commission, diagnose, and maintain automation solutions. It covers open and closed loop control, positioning, visualization, and communication.

Moxa has chosen version 5.0 of the 32-bit, open-source, scalable Windows CE as the operating system for the UC-7400 family of ready-to-run embedded computers.

Wonderware's Enterprise Integration Application 2.0 has completed certification as part of the SAP's "Interoperability Certification" program, which recognizes applications that integrate industry standards such as ISA-95.

The FOUNDATION fieldbus capability now incorporated within the Rosemount Analytical Model Xmt™ two wire transmitter for liquid analysis includes hazardous area intrinsic safety approvals from FM, CSA and ATEX. An agency-approved variant of FOUNDATION fieldbus called FISCO (Fieldbus Intrinsically Safe COncept) is also available

ND 780 DRO is compatible with all machine tools up to three axes. Its extensive library of onboard user cycles as well as its menu-driven text help makes it extremely operator friendly. Its newly designed ergonomic housing, soft keys and bright six-inch LCD screen are clear and easy to see.

The M-420iA robot uses FANUC's vision software for visual line tracking of randomly located parts from a moving conveyor. This provides the flexibility to handle multiple products on the same automation line, eliminating the need for costly fixtures, and reducing changeover time.

Citect has adopted Microsoft Visual Studio 2005 in the development of its new version of CitectSCADA software. Citect will release the latest version of CitectSCADA V6.1, which was developed using Visual Studio 2005, in February 2006.

Once Tag Groups are created, the TopView Window and Remote Viewer will display the group names for you to select when viewing tag and alarm information. In addition, each Tag Group has a default notification recipient which can be inherited by tags contained in the Tag Group.

The guides, previously combined into one volume known as the Regulator Handbook, are now available in two volumes – Natural Gas Regulators and Industrial Regulators. The guides serve as a reference for technical applications and pressure data on Emerson’s Fisher® natural gas and industrial regulators.

Modular switch is designed for an operating temperature of 0 to 50° Celsius and supports both Fast and Gigabit Ethernet as well as various routing, redundancy and security mechanisms. This makes the MACH 4000 suitable for use in industrial networks with complex applications, such as the combined transmission of video, audio and data information.

Partition Inserters (Model SF-400) cycle once every second and travel 38 inches vertically. Every up/down cycle accurately inserts solid fiber or corrugated partitions into cartons that hold bottles and plastic containers ready for shipment to the marketplace.