Industry Products

This ATX embedded motherboard comes with 4 DDR3/DDR3L 1333/1600MHz DIMM memory interfaces supporting up to 32GB system memory for faster communication between components.

A rugged, lightweight and corrosion resistant plastic (glass-filled nylon) housing is available on the Rosemount 3101, 3102 and 3105 process level transmitters.

This DIN rail-mountable unit based on the Intel Atom N2600 CPU is ideal for deployment in protecting networks in power generation and other industrial environments.

Embedded Ethernet MicroSmart Pentra with MRAM is available in two CPU models with 12 I/O configurations (8 DC inputs and 4 transistor sink or source outputs) and is compatible with current WindLDR software.

ROD 1930 rotary encoder series is suitable for use in mechanically-demanding motion control environments.

Model 71610 provides 32 LVDS differential input or output pairs plus LVDS clock, data valid and flow control signals via an easy access front panel 80-pin connector routed to the Virtex-6 FPGA.

PCM4806E drive allows an encoder input to the controller for closed-loop position correction capability.

Velox comes with MCU, SDRAM, flash memory, 10/100 Ethernet, three UARTs, SPI/I2C, RTC, eight timers, eight channel 16 bit ADC, two 16 bit DAC and a high-speed (83 MByte/s) data channel.

In a “Ferris Wheel” Positioner, one station is positioned in front of one to four welding robots, while the other station is outside the robot envelope where the operator loads/unloads parts.

PICO xMOD valve uses piezoelectric actuation technology for continuous operation at speeds of up to 500 cycles/second.

Software enables users to access plant-floor data via Wonderware InTouch software, using any mobile device, including Microsoft Surface tablets, iPads, iPhones, Androids and others.

Super Snooper scanners can be set up as Modbus RTU Masters, Slaves, or Snoopers, monitoring multiple Modbus devices for up to 16 process variables.

The TR-702 comes with integrated Ethernet or Wireless 802.11b/g Wi-Fi.

The two 7” panel PCs are powered by the Freescale i.MX535 ARM Cortex-A8 processor with speeds up to 1GHz. Based on the ARM architecture, the system is fanless with low power consumption.

CUF and CUM terminal blocks for the appliance industry have been tooled in high volume, thereby making them cost-effective.

Tropos XA delivers robust, high-performance and scalable wireless connectivity for utility, rail, mining and seaport applications in extremely demanding environmental conditions.

Model 7253D triaxial Isotron accelerometer is for applications requiring the measurement of shock and vibration simultaneously in three mutually perpendicular axes.

The 5-Axis Auto Tuning System performs measurements and compensation in real-time and allows for adjustments to be made in 10 minutes, minimizing downtime and enabling higher levels of accuracy.

PC-3X97B series is equipped with IP65 certificate that guarantees dustproof and waterproof protection, ensuring the reliability and stability operation in the broaden environment applications.

PS-1080A, IPS-1080-24V, IPS-1042FX-24V and IPS-1042FA are for high power demand equipment, such as a PTZ camera, long-distance wireless AP, etc.

CM100-C is powered by the Quad-core and Dual-core AMD R-Series Accelerated Processing Units (APUs) with the AMD A70M Fusion Controller Hub.

Series TSCC Digital Dispensing Temperature Control can be used to monitor and control product temperature and dispensing rate in the production of melted cheese, chili, or other heated food products.

These gages use air coupled, pulse echo acoustic technology which permits noncontact gauging for many industrial applications.

The corrosion-resistant ZS71 Series is expressly designed for high-pressure/ high-temperature wash downs (IP 69K).

SDN 40-24-100C single-phase SDN-C transformer is suitable for powering large DC loads on a standard, single-phase AC circuit.

IGMP inductive proximity switches are for low-temperature environments in spiral freezers and other cryogenic applications that use liquid nitrogen as a coolant.

Upgrades include network, power supply, and I/O modules.

These 300 V cables are intended for stationary wiring applications with minimal or no exposure to oil and flex cycles.

TNC 128 straight-cut CNC control works with milling, drilling and boring machines.

The all-optical, non-metallic MR338 passive sensor provides precision absolute angular measurement from 0° to 360° with 13-bit (8192 count) resolution and 12-bit multi-turn tracking.

UltraBot IE automated storage and retrieval system (ASRS) delivers totes, boxes and cases to one or more high-speed order picking workstations.

AC500-XC PLC is protected against a wide variety of threats including high and low temperatures, high humidity, low air pressure, salt mist and hazardous gases, and vibration and shock.

Emax Link abbreviated switchgear provides electrical Distribution Equipment Manufacturers (DEMs) a solution to design and build their own UL 1558 switchgears.

While small, the PC-V360 is able to hold VGA cards, power supplies and two removable hard drive cages holding a total of five 3.5” and 3 2.5” drives.

Encapsulated WLA light is a rugged, high intensity light ideal for machine lighting, visual inspection stations and general industrial area lighting.

OverView MVL-621 and OverView MVL-721 are industry-standard modules with full HD resolution and screen diameters of 60” and 70,” respectively.

These models have flow rates from 1 ml/min up to 30 ml/min by selecting from a choice of 4 different RPM drives (8, 12, 17 or 25 RPM) and a choice of tubing sizes.

SPiiPlusCMhp/ba is not only a mouthful, it has three built-in universal drives, EtherCAT master, and short move & settle times.

PFM-HDS has an AMD G-Series T16R Accelerated Processing Unit and companion A55E chipset for compatibility with legacy I/O, low power consumption and processing and graphic performance.

PCS100 UPS-I and PCS100 AVC protect sensitive industrial loads from voltage sags and other voltage disturbances.

The Rechargeable Battery Unit Kit removes the cost, hassle and inconvenient timing of replacing disposable batteries.

The SFT-110 SFE is well suited for both research and process development applications.

XCOM-6400 is a ruggedized COM Express module offering high-performance, low-power multi-core processors and a SODIMM hold-down that allows users to upgrade memory. Price: starts at $1995.

xPico is a compact, embedded wireless device server for machine-to-Wi-Fi connectivity. Price: from $27.80.

Alpha Mega is a fully integrated, digital alpha spectrometer for environmental laboratories and counting room applications requiring large sample size analysis capability.

TKS-G21-QM77B box computer, and EPIC-QM77 and PCM-QM77 single board computers, are based on Intel 3rd Generation CPUs and Intel QM77 chipset.

Desktop switching power supplies provide up to 70W from an input voltage range of 90-264VAC (47 to 63Hz). Price: from $17.

RLX2 features client/bridge fast roaming between access points, Ethernet packet optimization, and enhanced diagnostics.

myRIO embedded hardware device helps students design real, complex engineering systems more quickly and affordably than ever before.

The cDAQ-9188XT is an 8-slot CompactDAQ Ethernet chassis for distributed or remote measurements in extreme environments.

SP2 provides native support of HTML5 screens and animation for multiple devices and platforms, including Safari and Chrome browsers.

Series 70 has a 6-meter detection range, slim sonic cone, and integrated temperature compensation allowing -25° to +60°C fluctuations.

Meter is for use in multi-tenant applications including office buildings, shopping malls, industrial sites, residential complexes and universities.

CNi-ALs limit controller features universal inputs, 2 relay alarm outputs, programmable color displays, high/low limit and remote reset input. Price Starts at $164.

TE-SNW Surface Temperature Sensor non-intrusively measures the process temperature in hot and cold water loops in buildings.

The compact PULS DIMENSION C-series has a new family member, DIN-rail DC/DC Converter CD5-series, which can be widely used in many applications.

FX3S micro PLC provides full function PLC control, built-in high-speed inputs and outputs, relay outputs, and multiple built-in communication ports.

The bi-directional wet/wet design can be used for tank level measuremens, monitoring flow rate in heat exchangers or filters, and in a variety of test stand applications.

V3.0 now has the capability to bridge data from any classic OPC Server to any modern OPC UA Client.

Model 7298 triaxial, variable capacitance accelerometer makes accurate measurement of low-frequency events. Typical applications are measurement of whole-body motion in three orthogonal directions immediately following a shock.

APCe8670 carrier card for PCI Express provides an easy and efficient solution to interface a PMC mezzanine module to a PC across the PCI Express (PCIe) bus. Pricing starts at $750.

Corrosion Resistant Stainless Steel (CRSS) Connectors include standard cord connectors, liquidtight conduit fittings, watertight conduit hubs, jacketed metal clad cable connectors and ventilation plugs.

ScanIR3 creates real-time thermal images suitable for temperature monitoring of continuous processes as well as discrete manufacturing in production lines.

EDR-810 is an industrial-grade 8+2G secure router with Firewall/NAT/VPN and managed L2 switching functions, which allows it to transmit data efficiently while protecting the network and critical devices from cyber attacks.

The Model 2450 combines the functionality of a power supply, true current source, 6-1/2-digit multimeter, electronic load, and trigger controller in one tightly integrated, half-rack instrument.

Enhancements include front or rear panel touch safe, IEC inlets, an on/off rocker switch, AC "on" indicator and a 115/230V selectable switch enabling products to be used worldwide.

EL-2800M-PMCL and EL-2800C-PMCL 2.8-megapixel industrial camera models incorporate high fidelity ICX674 CCD imagers from Sony.

The WPL406 and WPL612 are designed for industrial barcode printing requirements, while the WPL304 is for desktop barcode printing. Prices start at $429.

CoreModule1-86DX2 is ideal for control applications that require power efficiency, small form factor design, longevity, and industrial grade ruggedness.

ST102A features a dual-element averaging system, improving installation repeatability and accuracy for larger diameter pipes and ducts.

Corrugated mounting plates are available in two sizes--“wide” (4.00”) and “narrow” (2.66”)--standards in the industries using corrugated bins.

The updated interface addresses international compatibility by adding language files for Chinese, German, Japanese and Spanish.

These programmable transducers convert and condition signals from most of the common resistance temperature detectors (RTDs), as well as thermocouple temperature sensors.

GS3-U3-91S6 camera has high resolution, global shutter CCD sensors with a USB 3.0 interface.

Updates in ControlMaestro 2013 include the BACnet Advanced operator WorkStation Certification, more than 160 standard communication drivers, and support for most standards and communication protocols including OPC, Modbus, SQL, ODBC, etc.

By Bill Lydon, Editor To meet their customer’s requirements, Sabisu has developed Shika, a lightweight historian, to process, manipulate and store data at higher speeds than can be achieved with SQL databases.

Turn-Cut function allows for processing work on horizontal machining centers without the need to use secondary machinery for a turning application.

The EHV/EHS is 30% more compact than previous models, yet it sounds off at up to 110dB at 1m.

The thyristor units start at 3A and range up to 2600A and 690Vac.

LS2018 and LS3518 motors are ideal for the design of compact linear axes as there is no need for the coupling and the bearing support point for the screw.

Series GFM2, GFM3 and GFM4 Gas Mass Flowmeters measure flow rates of a wide variety of gases.

HM960-HM86 is powered by the Intel HM86 Express chipset with up to 2 16GB of DDR3L 1333/1600MHz low voltage memory interfaces for faster communication between components.

HMI SCADA software has user interfaces that display and execute across all types of common Web browsers and are accessible from any mobile or smart phone application.

Lexium MDrive motors are now available with EtherNet/IP, ModbusTCP, and CANopen fielbuses.

PMK allows virtually any motor to be connected in parallel to any linear ball screw actuator, regardless of manufacturer.

Software allows for simulation, validation and optimization to be completed in the 3D virtual world and then transferred directly to the real world.

CANblue II universal bridge, gateway, and PC interface solution is for the wireless networking of CAN components and systems.

The controller has a Linux-based, real-time OS and Xilinx Zynq-7020 All Programmable system on a chip (SoC), which combines a dual-core ARM Cortex-A9 processor and Xilinx 7 Series FPGA fabric.

LabVIEW software is ideal for any measurement or control system, and the heart of the NI design platform. Integrating all the tools that engineers and scientists need to build a wide range of applications in dramatically less time, LabVIEW is a development environment for problem solving, accelerated productivity, and continual innovation.

Safe-T-Rack helps ensure compliance with evolving arc flash mitigation regulations and safe operation of circuit breakers, motor starters, loadbreak switches, vault switches, network switches and Load Tap Changers.

Products include Floodgate Defender, Floodgate Agent and Floodgate Aware software.

SEA 9751 and SEA 9754 modules enable users developing monitoring and measurement systems based on CompactRIO to access the entire application remotely.

The positioning range of the N-725 has been extended to 2 mm while maintaining very short settling times on the order of 20 milliseconds.

X20 and X67 modules now function reliably at temperatures from -25 to +60°C.

HR908-B is a Type 6 COM Express Compact form factor single board computer, based on the Intel Core QM67 Express chipset.

LEC-2260 allows sustained operation at temperatures between -20°C and 55°C.

The safety laser scanner offers a wide area detection zone at 190 degrees and is easily set to a maximum protection range of 2 meters and maximum warning range of 10 meters depending on the application.

EDS-405A/408A-EIP and EDS-405A/408A-PN are EtherNet/IP and PROFINET-enabled managed Ethernet switches.

TC8928 Analog Broadcaster/Bridge receives a single 2/4-wire 600 ohm analog signal and broadcasts it to up to 7 remote analog lines.

The G-Type sensor features direct analogue output in 3 signals: in voltage (0-10V or +/-10V) or current (4-20mA).

WDG digital pressure gage measures gas and liquid pressure with high accuracy.

EyeVision 3.0 software now supports the Raspberry Pi operating system called Raspian, which is a slightly modified Debian distribution.

RSGD Softstarter Series reduces the starting current down to 3 to 4 times the rated motor current, resulting in smoother starting and stopping of motors.

EK-365 enables maintenance professionals to locate industrial leaks in cramped or hard-to-reach areas larger lamps can’t.

Microlink 851-SG logs data from strain gauges, pressure transducers, voltage signals and digital inputs over Internet or Ethernet.

OPC Server for Well site Information Transfer Specification (WITS) provides open data connectivity to well site data systems using WITS-compliant devices.

IB965 PICMG 1.3 CPU card supports the Intel Q77 Express Chipset and 3rd generation Intel Core processors.

NITRA pneumatic air FRLs are available in 1/8 to 1-inch NPT female port sizes to support a broad range of pneumatic air supply applications.

Safety sensor monitors the position of hinged, sliding or removable guards using a specifically coded, passive RFID tag in the actuator.

An external cross shaped cam allows the AZM300 to accept the actuator from any of three sides, providing mounting flexibility for either left- or right-hinged doors, or sliding guards.

GaugeCalHP pressure comparator is suitable for test and calibration applications up to 15,000 psi.

FireWire Cable works in temperature extremes of -65°C to +165°C and harsh environments.

Safety Isolators and Splitters provide reliable isolation and signal conversion for HART data in functionally safe process control settings.

Boxer Series S Pumps are constructed with PPO housings and silicone diaphragms and valves for working at temperatures to -20°C (-4°F).

APC-3X84A has IP65 protection and meets strict hygiene regulations for food/chemical industry, medical, and factory automation applications.

For photovoltaic panels, the filters maximise the operating DC voltage to the limit of the European Union’s Low Voltage Directive (LVD).

The meter has alarms, 2 relay alarm outputs, programmable color displays, built-in excitation, front removable plug connectors, and programmable digital filter. Price Starts at $154

Roh’lix linear actuators are now available in stainless steel for use in operations where cleanliness is a priority.

Available in nine different travel and performance configurations, PlanarDL is suitable for applications ranging from high-accuracy surface profilometry to high-speed semiconductor and LED wafer scribing.

The FlexStream Humidification Module can be used to add adjustable humidity levels between 20% and 90% RH to trace gas mixtures.

HMI-TV will transform any consumer TV with HDMI input into an industrial HMI display.

BU-67302B0C0L-202 provides dual MIL-STD-1553 transceivers, protocol, and 64K x 36 of internal memory within a single BGA device with a PCI-Express host interface.

Controller Card integrates up to four amplifiers and a complete positioning motion controller on a single printed circuit card.

ProRPM Business Intelligence software allows users to make smarter and faster decisions, optimize business performance, and transform data in to actionable analytics and dashboards.

Fiber Media Converters solve the problem for applications where the distance required to connect top of rack switches exceeds the 100 meter limitation of 10G copper.

Enhancements in version 3.3.1 include native integration with Obvious AcquiSuite devices.

RSC3200 Hall effect angle sensors operate in temperatures of -40 to +125 °C, and withstand shock and vibration up to 50 g and 20 g respectively.

Vert-X 28HD Series have a 0 to 360° measurement range, repeatability of 0.1° or better, and maximum hysteresis of 0.1°.

LFP membrane potentiometers are for applications that require a linear position sensing device in a narrow space.

Rotary stages incorporate a precision worm-gear drive mechanism and bearing components for accurate positioning performance.

The radio can operate in digital and analog modes concurrently and fits seamlessly into an existing communication system.

This transducer connects directly to a computer and has 316L SS wetted parts, 1000/ reading/ second and is ruggedized with secondary containment.

Mentor Graphics Nucleus is a real-time operating system known for its performance, reliability, and scalability with a small footprint.

The AHP-1083 features a Dual Core Intel Atom D2550 processor (up to 1.86 GHz), with up to 4GB of DDR3 SODIMM system memory.

ProVu PD6262 and PD6363 1/8 DIN panel meters provide integrated math functions for flow rate or total flow calculations.

Project description: As main effect of recently carried grants (in cooperation with Institute of Control and Industrial Electronics from Warsaw University of Technology), a new series of sensorless vector frequency converters was worked out (up to 160 kW rated motor power). As a continuation of R&D implementing an extended power range product line (up to 315 kW rated motor power) is planned. Proposed frequency converters can be used for smooth and precision control of rotational speed of AC motors (typical, 3-phase squirrel cage induction machines). These converters was designed as general purpose equipment with easy application in new and refurbished systems (inverters are powered from typical AC-mains: 3x400 V 50 Hz). Worked out frequency converters gives as results for example rapid energy savings, vibrations limiting, noise level limiting, machine overhaul life elongating (less wearing of transmission gears, clutches etc.). Project innovativeness: Worked out vector frequency converters are based on previous, standard-line devices. In proposed new vector inverters innovative control method was used (DTC -Direct Torque Control) to direct control of motor generated torque. This method makes possible to accurately control of motor torque (also for zero velocity conditions with stopped motor shaft) and maintain declared drive parameters also without an speed/position (encoder) installed. For the sake of using innovative control methods use of mechanical speed/position sensor isn’t necessary. Proposed frequency converters are totally domestic products. These are competitive products for worlds potentates as ABB, Vacon, Siemens, Danfoss, Eurotherm Drives etc. Proposed electrical drives (frequency converters) don’t have functional equivalents on national market in proposed power range.

The system includes a sensor and evaluation software that captures 3D data that can be used to derive a quality claim objectively based on the measured values.

Linux driver and a USB 2.0 or USB 3.0 camera provide an inexpensive application for kiosk systems, microscopy, or the ITS sector.

Inserts fit into the company's standard metal, EMC (high shielding), HPR (external power) or Han-INOX (stainless steel) housings.

Enhancements include built-in debugging tools for VBScript, support for HTML 5 screens and animations, and Russian and Simplified Chinese languages.

HR902-BL is powered by the BGA 1023 packaging technology for the low-power and cost-efficient 3rd/2nd generation Intel Core processors with 22/32-nanometer process technology.

The reaction torque sensor replaces the stepper motor mounting plate in an automated assembly machine so it can provide a continuous torque feedback to the motor control module.

Enhancements to Field X-ray Lab (FXL) include z-CAL calibration and operation methodology software for light elemental analysis.

The GOT5840T-832 supports an energy-efficient Intel Atom processor N2600 1.60 GHz with the Intel NM10 Express chipset.

A-Series miniature pressure switch is available in a SIL capable explosion- proof configuration for hazardous areas.

Meters have interchangeable direct reading scales for air, water, argon, oxygen, carbon dioxide, nitrogen, helium and hydrogen.

FX3GE PLC has built-in Ethernet communications and embedded analog I/O.

Enhancements in Arena v14.5 software include 3-D animation for material-handling components, such as conveyors and transporters.

IND560fillplus software meets the needs of basic and complex filling and blending applications.

D Series, DA Series and DM Series and CR Series of miniature IP65-rated rocker switches meet a wide range of application requirements including appliances, computers & peripherals, medical instrumentation, and electric tools.

For detection of shiny objects on reflective backgrounds, S8 doesn’t require a prismatic reflector, mitigating mechanical and space limitation requirements.

Blending program includes control of ratio, sums, selectable master set point and monitoring of valve operation.

FlexPicker robot now handles 8kg weights.

Proficy OEE continuously monitors equipment performance, providing manufacturers an analysis tool which can increase efficiency and productivity on the shop floor.

PS6R power supplies offer a built-in expansion slot that allows use of DC-DC converters, allowing users to add 5V and 12V outputs with a simple plug-in module.

Newest Tablet PCs Feature Enhanced Graphics Performance, Greatly Improved Battery Life, Integrated Front and Rear Facing Cameras, and True RS-232 Serial Connectivity.

RP-2032151XD0 provides a total continuous current output capacity of 120 amps at 28Vdc in a 3-lb box, along with a high channel count and advanced programmability.

The Background Suppression (BGS) Photoelectric Sensors provide precise distance detection and a fine distinction between a target and its background.

Hotspot is a high-speed wireless Ethernet solution designed for plant-floor automation, SCADA systems, mobile worker Wi-Fi infrastructure and process control systems.

TX2000 pH/mV Transmitter and CX2000 Conductivity/Resistivity Transmitter monitor changes in process fluids in water, chemical, electronics, food production, environmental and wastewater processing applications.

EyeScan LZ 3D sensor profile camera can be used wherever height profiles need to be determined for moving or static objects.

Radar sensors are ideal for collision avoidance on mobile equipment, outdoor crane-to-crane proximity detection, vehicle detection and flatbed or box truck detection at loading docks.

Splashproof OM-CP-RFOT is equipped with a flexible piercing probe allows it to be used in the harshest environments.

The PTIO 1.5/S series is only 3.5 mm wide with a top-level location for the power wiring.

OPD-1086B features wide range power input from 9V/DC to 32V/DC, LED backlight and low power consumption.

AEC-6401 Compact Embedded Controller has an energy efficient Intel Atom N2600 1.60GHz processor and Intel NM10 Chipset.

PW-82530N0 torque loop controller precisely regulates current in the motor windings of 3-phase brushless DC motors.

Housings are available in 12.5, 17.5, 22.5, 35, 45 and 67.5mm wide housings to accommodate a wide range of application requirements.

UCH3s USB3 Controller Hub is SuperSpeed Logo Certified by the USB Implementers Forum and integrates OTP Flash configuration memory. Price: from $3.58.

The NA120 is suitable for firewall, VPN, IDS/IPS, anti-spam, anti-virus and UTM as well as network management applications.

Hexapods produce motion in all 6 degrees of freedom; i.e., XYZ as well as pitch, yaw and roll, making them virtually as versatile as the human hand.

Continuous Path Motion Control software for jetting underfill for flip chips optimizes dispense head motion, saving time and increasing units per hour (UPH).

OM-ESW-100 series is a range of compact IEEE 802.3 layer two network unmanaged industrial Ethernet switches with automatic speed, duplex and cable sensing. Price; Starts at $109

Bridge Data Manager can be used as a standalone solution to log data from virtually any data source for comparing, trending, validating, commissioning, and reporting on that data. Price: From $500.

The CE-Certified Technoshot Series is available in a 7” and 10” screen size, and features an eco-friendly LED backlight with a sleek, slim structure.

Exceptionally rugged for extreme environments, the EXPC-1319 meets UL Class 1, Div 2 and IEC ATEX Zone 2 hazardous location codes without the need for special measures such as complex and expensive enclosures or additional certification processes.

The Mobile Intel QM67 chipset paired with this COM Express basic module provides excellent processing performance in media, graphics and I/O.

Modulyzer measures density and the refractive index of fuels, waxes, lubricants and similar materials.

The library supports quick and easy development of sound and vibration applications – independently of the measurement hardware used.

B Series Safety Light Curtains are designed for area guarding, hand and arm protection and machine guarding.

Trapped key interlocks are for power isolation and access control (lock-out) machine guarding.

MZ controller series allows for the custom combination of PRSU 4, 5, or SRUS (light curtain) controllers.

The complete line of general purpose signaling switches and safety switches include: Ribbons switches,Touch pads, Foot switches, Hand switches, Tactile and non-tactile switches, and Sensing cells.

The safety edges are available in the following different profiles: (low TS-6, 8, 16, 18), medium (TS-26, 26, 48), and high (TS-47, 57, 67), front and side actuations (TS-26, TS-46, TS-48) and curved or formed (Flexion).

Mat options include Controlmat (abrasion resistant), Armormat (impact resistant barrier), Safetyzone (molded and sealed), ComfortZone (anti-fatigue cushioning, long periods of standing), and Diamond plate (aluminum and heavy load capable up to 20,000 lbs.).

Updated software, which enables 3D rotational viewing of part shape and gage fingers, can be retrofitted to the company’s vintage Autoform, Formaster, Formaster II, CB, CBII and AutoShape press brakes.

2080 Thermistor module provides fully linearized temperature measurements or a wide range of resistance inputs.

CANpro interface device combines USB High-Speed technology with high-performance CAN messaging and a rugged industry-hardened housing featuring a lockable USB-B connector.

IPC01 devices are available in 400VDC / 5A, 75VDC / 10A, 280VAC / 5A, and 40VAC / 10A versions, each allowing remote switching, load protection and output status monitoring.

This 10mm reed switch can be used for counting, end limit detection, low power devices, movement or position detection, and presence, proximity, rotation, or speed sensing.

Multi-gate monitoring system includes HE Series non-contact safety interlock switches and multi-gate SCU-1 control unit for machine guarding.

HPP (High Pressure Piston) incorporates a piston design to manage supply pressures up to 6,000 psi at temperatures up to 260ºC and deliver high output pressures up to 3,000 psi.

PCIe-2602 supports all SD/HD/3G-SDI signals, and operates at six times the resolution of regular VGA connections.

Remote RadEye HR X-ray camera provides high-resolution radiation imaging for NDT/industrial inspection, X-ray crystallography, and general radiography applications. .

This manually operated on-off valve is made of PTFE wetted parts and Polypropylene structural components.

The motion controller is ideal for applications where end-user specifications require a third-party PLC and up to eight axes of servo control.

PUB & PUF Portable Ultrasonic Flowmeter Kits are each capable of 20 hours continuous operation with a built-in battery, which requires 6.5 hours to recharge.

Graphite HMIs are available in eight different models, in sizes ranging from 7” to 15”, with sleek bezels that provide a relatively large display.

The Glide Screw’s simplified design speeds installation and simplifies bills of material, while an integrated lubrication block virtually eliminates maintenance requirements.

AutoSorter 1200 high-speed sorting instrument is for pre- and post-analytic specimen processing at up to 1,200 tubes/hr.