Industry Products

Equipment Insight enables OEMs to securely collect data from connected machines, analyze that data, and get actionable information to deliver better service levels and optimize equipment performance.

Additional gateways support EtherNet/IP to Modbus TCP/IP, EtherNet/IP to Siemens Industrial Ethernet, and Modbus TCP/IP to Siemens Industrial Ethernet.

PM-30 offers increased power delivery and the flexibility to install the ROC800 in either 12 volt solar installations or 24 volt rack mounted installations without needing to change the power module.

Its self-correcting architecture maximizes DC performance by enabling ultra-low offset, low-offset drift, and superior common-mode and power-supply rejection. Price: $1.52.

Fullscope EDGE for AX works with Microsoft Dynamics AX 2012 enterprise resource planning (ERP) software.

The device exerts no physical impact on a part, delivering force-free measurement of blisks, blades, gear profiles and flank lines, and other potentially deformable parts, without a loss of accuracy.

Updates include EtherNet/IP Enforcer, Tofino Xenon and Tofino Configurator (TC 2.0) that enable network managers to easily upgrade their existing systems without downtime.

The APN-320N(-T) is able to communicate on both the 2.4 GHz and 5 GHz frequency ranges simultaneously and is IEEE 802.11a/b/g/n compliant.

ISL71091SEH20 provides a 2.048 voltage reference for commonly used 11-bit ADC resolution, and the ISL71091SEH40 provides a 4.096 voltage reference for 12-bit ADC resolution.

These Type 3 safety laser scanners have EtherNet/IP communications and provide a 4 meter safety range, 15 meter warning zone and a 270 degree detection angle for safeguarding large robotic cells and body entry detection.

LCI-80x RPC Multi-Variable Controller monitors and controls industrial processes, and logs sensor and process data to standard USB flash memory.

BA diesel driven pumps, updated to norm block construction (NMC), have a capacity of 100 m3/hour to a maximum of 6500 m3/hour.

PT-7528 Ethernet Switch meets the requirements of the IEC 61850-90-4 standard outlining network engineering guidelines for Communication Networks and Systems in Substations.

Designed for cabinet installation, the CP22xx series combines the advantages of a modern multi-touch interface with multi-core processors for automation and control applications.

The T35 modules allow the convenience of mounting a wide variety of connectors to a DIN rail.

Model XLUS88 is a subminiature, bidirectional, tension/compression load cell for ranges from as low as 150 grams up to 1,000 lb.

System provides a single point of connect for system configuration. All remote I/O nodes, whether they are 100 meters or up to 10kms from the controllers, can be configured from one central location.

The data logger has a digital display that shows data in real time, a battery life indicator and audible and LED alarm indicators. Price starts at $299.

The module may be either snapped onto the back of a UniStream HMI Panel next to a CPU to create an all-in-one HMI + PLC controller, or installed on a standard DIN Rail using a Local Expansion Adapter.

ASB-R's fully-encased die-cast zinc housing can withstand shavings, welding sparks, aggressive coolants, lubricants, as well as shock and vibration.

The KS230-CD is available with a 4-wire resistive and projected capacitive 7” LCD touch screen panel that has 400 nits brightness and can support WVGA resolution of 800x480.

Guardmaster 440C-CR30 is a flexible, cost-effective and easy-to-use configurable safety relay ideal for applications requiring 4 to 10 safety circuits and control of up to 5 zones.

capaNCDT 6110 measurement system comprises a capacitive displacement sensor, sensor cable, controller (electronics) and a supply/signal output cable.

MI987 Mini-ITX motherboard is based on the Q87 chipset designed to support socket LGA1150 4th Generation Intel Core i7/i5/i3 desktop processors.

The GOT2000 acts as a seamless gateway to industrial automation devices, including programmable logic controllers (PLC), variable frequency drives, servos and temperature controllers.

Our customer in this instance was a manufacturer of autonomous and semi-autonomous farming systems. The company wanted to integrate advanced optics in their machinery in order to better detect the edge of crops, speeding up harvesting and minimizing any product loss. Specifically, their aim was to enable their harvesting vehicles to "sweep" the fields more precisely and avoid missing any sections and ultimately help farmers increase productivity.

This PCU/1 main control unit is modular and can accept a total of 14 expansion modules, creating a system that can have up to 128 inputs, 16 dual channel safety outputs, and 16 status outputs to handle your machine safety configurations, devices, and networks.

The Leddar™One is installed pointing forward (in the direction of the motion) and interfaces with the controllers to accurately detect/measure how far the next conveyor is and how fast it is going, thus ensuring that nothing ever collides and keeping product damage to a strict minimum.

JOFRA ASC-400 provides laboratory accuracy for field calibration, process monitoring and maintenance functions.

Motorized stages can be assembled into many different configurations such as XY, XYZ, or XYZ/rotation. Any combination of stages is possible, down to different product families, travel, and lead screw pitch.

One of our customers, a cooling tower manufacturer, was looking for an effective non-intrusive solution to continuously detect the level of water in their systems.

This single-element sensing module is particularly suitable for applications such as level sensing, security and surveillance and proximity detection, just to name a few.

Grasshopper3 GS3-PGE-23S6 models use color and monochrome versions of the 1/1.2" Sony IMX174 Exmor global shutter CMOS sensor and offer image resolution of 1920x1200 pixels and frame rates up to 46 FPS.

CombiLyz provides precise analysis and differentiation of media in the food and pharmaceutical industries and in water treatment technology.

The controller's microprocessor circuitry provides exact time control of the dispense cycle for Radial Spray or Radial Spinner system applications.

CAN and J1939 modules remove the need for external communication gateways, saving time and money by simplifying programming and installation costs.

The applicomIO package provides the NIC, configuration software, development libraries and OPC data server in one package for connecting fieldbus to a PC.

The Rosemount 2120 level switch is now certified for SIL 2 functional safety with SIL 3 capability enabling the device to meet the most demanding safety application requirements.

The VPX6000 is a high performance blade designed to meet MIL-STD-810F for harsh environments and provide the high availability required for mission-critical applications, including radar, sonar, UAV and UGV in defense and aerospace.

UA18EAD and UA30CAD sensors feature maximum sensing ranges of 250 to 3500mm and offer flexible output configurations to fit most every application.

eBOX660-872-FL-DH fanless embedded system has a wide operating temperature ranging from -20°C to +70°C to ensure operational reliability in critical environments.

These pressure transducers deliver reliable operation in environments with regular and prolonged exposure to harsh and potentially corrosive chemicals – even at temperatures from -30 to 130°F and depths to 450 ft.

Very few companies today can afford Internet downtime. It used to be an inconvenience but is now life or death. The new face of modern businesses has made Internet connectivity mission critical.

The MultiGate router is capable of switching between ADSL and cellular GSM network interfaces in case of link failures, or between two cellular service providers for redundancy.

GRED is particularly suitable for embedded systems, which have to process large quantities of data in real time, such as in production or logistics.

SHADOW tags can be used in automation applications where exposure to light of tagged assets changes during the process.

RedFox is a layer 3 industrial Ethernet switch with OSPF, RIP and VRRP as well as process level ring recovery times of around 20ms even at speeds of 1 gbit/sec.

The Sun CANopen Master Controller is a standalone network motion controller that provides real-time synchronization for single and multi-axis equipment.

Three ML100-8 diffuse mode sensors work in increasingly complex and space-constrained applications.

A lighter, precision-machined die-cast aluminum housing allows for seamless alignment into many applications.

The PR 4511 provides easy and cost-effective remote access to process values - by enabling existing and future PR 4000 and 9000 devices for digital communication.

The MCUs are coupled with software and tools for designs with Bluetooth, USB audio, graphics, touch sensing and general-purpose embedded control.

PC-DMIS 2014 measurement software is for the collection, evaluation, management and presentation of manufacturing data.

AMB-IH61T3 industrial Mini-ITX motherboard is powered by an Intel H61 chipset supporting 3rd/2nd Generation Intel Core i7/i5/i3 processors.

GHG 981 safety switches are suitable for Zone 22 hazardous dust environments and for high ambient temperature industrial applications.

iZControl provides control of mouse, keyboard, monitor connection and mass storage to run a RazerCam smart camera as a standalone system with monitor.

The two new models provide a 5V/55A and 24V/13.3A output. The PMF-5V320WCGB and PMF-24V320WCGB offer protection features including overvoltage, overcurrent, over temperature and short circuit protections.

D8000 seven-channel differential analog input smart data acquisition modules communicate using the Modbus RTU protocol with USB 2.0 & 1.0 output.

Due to the compact design and the diverse port configurations, these switches can be integrated into any application.

ProfiHub B5+RD PROFIBUS hub has a built-in PROFIBUS DP slave to forward diagnostic data to a PLC.

10 power supplies cover output voltages from 5 to 48 V DC, and are available in 25, 30, 40, 55, 60, 90 and 100 W versions.

WAYJUN HNDW2-5W series are a thin, wide input, isolated DC-DC converters. Input Range:4.5-9.0,9-18V,18-36V, 36-72VDC. There are single output and dual output. High regulation accuracy, high efficiency, high reliability, low ripple and noise make it suitable for sub-distribution board power supply system. They are widely used in industrial computer, automatic control, measuring instruments, and a variety of other anti-jamming power occasions.

The electro-pneumatic CMSX positioner provides proportion closed loop control for liquids, gases, or any application utilizing a quarter turn actuator.

WAYJUN WJ61 series 16-ch DI Isolated Digital Signal to RS485/232 Module,Slim-line plastic housing with integral 35mm DIN rail mounting , terminals,power supply(8-32VDC)

Pre-Wired Mencom receptacles is designed to help drastically reduce labor time and costs associated with installation.

ECS-7000M has multiple rugged IP67 rated M12 connectors, including three RS-232, one RS-232/422/485, four USB 2.0/3.0 and four GbE LANs.

WEC7 BSP Windows Embedded Compact solution works on the Sitara AM437x processor platform from Texas Instruments (TI).

PIC24F features an integrated hardware crypto engine, a Random Number Generator (RNG) and One-Time-Programmable (OTP) key storage for protecting data in embedded applications.

Enhancements in v6.0 include FleetView, which provides visibility for control systems including changes that occur by location, over a period of time, or to a specific group of assets such as workstations, switches and firewalls.

Lightweight, flexible robot arms offer fast and precise operation with intuitive programming. ROI: 3-8 months.

The DT450G detects the qualitative level of dust or particulate matter by working off of the principle of inductive electrification.

The DT9826 USB DAQ modules are available with 4, 8 or 16 analog inputs, each providing sampling rates of up to 41.6 kHz.

Ti90 and Ti95 Infrared Cameras have wireless connectivity, making them suitable for maintenance, troubleshooting, and HVAC/R technicians, electricians, and facility managers.

Need a custom protocol or function? Prosoft Technology’s Linux Development Modules for ControlLogix or CompactLogix are the answer.

Safely control access to running equipment and machinery with Dold trapped keys from AutomationDirect.

Netbiter® EasyConnect EC350 and EC310 are the next generation platform of connectivity gateways from HMS.

Softing's echocollect UA is a reliable, industry-hardened gateway with an integrated and easy-to-configure OPC UA Server.

The ECO Compact 20 is is ideal for use with vertical machining centers, housing 20 pallets in a 2-meter x 2-meter footprint, saving valuable manufacturing space without sacrificing capacity.

Virtual Andon can be integrated with hardware-based andon systems and passes data to Industrial Andons’ Shop Floor View web based tracking and monitoring system.

Using the X-TEC 15 circular plug-in connector, motors can be retrofitted quickly and easily to produce a plug-in solution.

The MZ07 robot arm features ultra high-speed motion capability with advanced through-arm dress capabilities to simplify routing of hoses and cables for material handling, assembly, vision and many other applications.

FlexGui can provide work cell control, production data tracking, cell initialization and operation, manual override functionality, testing and diagnostic functionality, and even customized help screens.

These current sensing switches feature a single turn potentiometer, allowing the trip point to be set before the sensor is installed or before the monitored circuit is energized.

Effective immediately: for SILworX there are three different license variants (full license, HIMatrix license, maintenance license). Furthermore there are new TÜV-certified function blocks available.

With these inserts, a single Han-Eco or Han-Yellock connector can replace a bigger connector or multiple units for significant space savings on the device or control cabinet.

Data logger measures and records the power and energy consumption of 120V plug loads from office equipment and other devices.

zForceAIR projects an infrared light field on the surface of the display or desired touch area and gives accurate X and Y coordinates for touch functionality.

HP-L-20.8 scans complex surfaces and work pieces made of the most challenging shiny materials such as machined, cast, stamped or forged metals, plastics, carbon fiber and many more.

Spectrum II fluid dispensing systems are for applications that are sensitive to contamination by submicron-sized particles, such as wafer-level packaging and mobile phone camera module assembly.

The Sysmac NJ Machine Automation Controller now provides direct connectivity to SQL databases, including Microsoft SQL, Oracle, IBM DB2, MySQL and Firebird.

Ratings of STP6903 DIN-rail surge protective devices are now UL 1449 3rd Edition Recognized for up to 690VAC for 3-Phase WYE configurations.

The PXIe-9848H features a x15/x50 signal conditioning module providing a high input voltage range of ±100V for measurement range expansion in a PXI system.

EyeVBox II has an Intel Atom processor as well as 4 USB2.0 interfaces at the back, 2 USB2.0 interfaces at the front for USB 2.0 cameras, and optional DVI-I and HDMI interfaces.

MC3200 is available with support for both the Android and Windows Embedded Compact (CE) 7 operating system (OS).

CHA-14 and CHA-17 feature a versatile hollow shaft that makes it easy to pass power supply cables, shafts or laser beams directly through the servo actuator.

Designed for a temperature range between +60 and +100 C, TGM 05 sensors open a contact if a pre-set temperature is exceeded.

Copper Analyzer System provides a highly accurate turn-key analyzer solution for electronics manufacturing wastewater treatment processes.

Typical applications include machine, process, and batch control, material handling, engine-driven pumps, compressors and generators, hydraulic equipment as well as oil & gas production equipment.

Enhancements in version 2.2 of HMI Pad software enable it to turn off-the-shelf iOS device such as an iPad into a full featured, powerful Mobile HMI.

LEC-3013T is equipped with 15kV ESD/surge protection for the serial COM ports and 1.5 kV magnetic isolation protection for the Ethernet ports.

Series 2260B Programmable DC Power Supplies include two 360W and two 720W models for benchtop, embedded and manufacturing test applications.

SAMBA PLC has a 3.5” QVGA 16-bit touchscreen that supports 24 user-designed screens, and up to 40 images per application.

The rugged RM6380 is built with MIL-STD-810G compliance. It provides high image quality with its 20.1 inch LCD screen that supports 1600 x 1200 resolutions. This new 9U monitor is deal for mission critical applications that can’t afford any down time.

SPIDER II 16TX EEC and SPIDER II 16TX/2DS-S EEC switches have have a metal housing, can withstand extreme heat and cold, and are approved for use in environments with a high explosion risk.

SyncAlert real-time notification and escalation software quickly notifies the right resource about problems while tracking the results.

The side switch guards avoid inadvertent actuation and all models can be installed with seals to reinforce switch actuation control.

RN4020 Bluetooth LE Smart module includes all of the hardware, software and certifications that designers need to easily add this low-energy connectivity to any design.

The battery-powered THZ WirelessHART assembly transmits temperature and HART diagnostic information to a WirelessHART gateway in situations where power is not readily available.

Version 3 of the USB Fieldbus Interface now has multiple options for commissioning and configuring FOUNDATION fieldbus devices.

The SLA incorporates precision Cross Roller Guides with anti-creep protection for increased stiffness and lower friction.

The TW6872/4 end-to-end solution delivers HD quality at twice the distance of typical HD-SDI solutions and can offer customers significant cost savings by enabling the use of existing cables when upgrading.

MI805 Mini-ITX Motherboard has an Intel Celeron J1900 quad-core processor with a clock speed of 2.0GHz and up to 8GB of memory.

The Series WE31 incorporates a full port 3-way NPT stainless steel ball valve for flow rates with minimal pressure drop.

GROOV-AR1 hosts groov mobile operator interfaces for virtually any automation system.

IAQM-THCO2 is capable of measuring air temperature, relative humidity and CO2 levels.

SYS-405Q fanless quad-core Intel Atom E3845 based industrial computer has USB, dual Ethernet, mini-PCIe and serial ports housed in a rigid aluminum alloy enclosure.

Designed to eliminate resonance in stepper motor ball screw assemblies, the two part elastomer element dampens vibration caused by the actuator carrier struggling to find its home position.

EN50155-certified RCS-2000 series is based on the Intel Quad-Core Atom E3845 (Bay Trail-I Premium) processor platform.

C2 Floor Scales are built for harsh chemical and wash down industrial environments, yet are easy to use and install with the latest advancements in weighing technology.

These sensors are designed to be integrated into applications where they can be mounted in enclosed devices.

RMC6224A features 4 low profile PCIe backplane, single Xeon E3 Quad Core processor and an embedded Micro ATX motherboard.

i146-SCE is a modular DC servo drive, developed to meet requirements of Marine & Subsea market.

For control rooms and big data analytics labs, F50 offers a combination of high resolution and active 3D stereo at higher frame rates.

A2-PAC has a Sercos or EtherCAT master interface and onboard I/O.

For control rooms and big data analytics labs, F50 offers a combination of high resolution and active 3D stereo at higher frame rates.

CPT now provides up to 100W of output power @ output voltages of 2.5, 3.3, 5.0, and 12Vdc, ideal for distributed power architecture applications or as a fully regulated intermediate bus converter.

Series SN Solenoid Valves easily mount directly to pneumatic valve actuators reducing the need for tubing, fittings or brackets, thereby reducing assembly cost.

Eco-L motor soft starter is a motor starting and protection device that is integrated with power electronic technology, microprocessor and automatic control.

Touch Robot is able to perform precision grinding and machining to polish, deburr, and deflash cast and forged parts.

X-CPU 31 CPU for small and mid-range safety applications integrates all functions of the system bus module.

Used with applications where water is present or used in a hose down procedure, the stainless steel cable glands are robust and corrosion resistance.

These units feature a BA-C pump coupled to a diesel engine, including the control panel, and mounted on a high quality, galvanised sub-frame.

The feed-through terminals are now available for wire cross sections between 16 and 120 mm², thereby covering a total range of 0.08 to 120 mm².

Type P99 gas pressure regulators help to maintain consistent inlet pressures to downstream equipment, allowing for the accurate control of distribution system pressures, even with widely varying flow rates and supply pressures.

HiLCOS 8.9 now has integrated Parallel Redundancy Protocol (PRP) technology, a new industry standard that allows systems to overcome network failures without affecting data transmission.

NSM-208A Ethernet switch supports 10/100 Base-TX and features 10/100M auto negotiation and automatic MDI/MDI-X crossover for plug-and-play.

mbSECBOX detects malware similar to STUXNET and other possible threats to Siemens S7 PLCs.

GEVA-312T is a stand-alone system with a built-in touch screen display that delivers flexibility and easy migration with multiple GigE ports.

reACTION allows extremely time-critical subprocesses to be managed using standard hardware, all within the requirements of IEC 61131.

The SCS family of air or liquid cooled energy storage solutions is for mission critical or remote location requirements that need to perform under extreme environmental conditions.

The camera features 4 MP 60fps global shutter sensor and quad core Intel Atom 1.9 GHz processors, FPGA co-processors, and flexible software support.

The system comes in standard 2x2, 3x2 and 4x2 tiled LCD set-ups, featuring a bezel as narrow as 3.5 mm with the Overview OVD and KVD series.

The Blackfin processor delivers 800 MMACS of processing power at less than 100 mW and includes up to 1 MB of internal SRAM, eliminating external memory in many applications.

Enhancements include a TFT LCD with improved display characteristics and a design that facilitates easy maintenance.

The AC10 Micro Drive is a simple, reliable and economical AC motor speed control for 0.25 HP to 30 HP applications. With compact size and features normally only associated with higher specification drives, including sensorless vector mode, output frequency up to 650Hz, and a full 150% overload at 0.5 Hz for 1 minute, AC10 provides an optimized solution for machine builders looking for a compact, cost-effective, UL listed drive without compromising on performance.

The Hot Standby system uses both hardware and software components to create a control system with redundant PACs, capable of interfacing to a wide variety of I/O devices.

This hazardous area transmitter meets the requirements of moisture measurement applications where explosion-proof rather than intrinsically-safe certification is needed.

Universal Valve Actuator permits the use of a single motor and control software to operate virtually any Valco or Cheminert rotary valve, both two position and multiposition.

The FMC-500 is a high-speed digitizing and signal generation FMC IO featuring two 500 MSPS A/D channels.

Applications include wireless infrastructure sites, indoor/outdoor DAS (Distributed Antenna Systems) requiring low PIM (Passive Intermodulation) performance.

Fractionator automated laboratory analyzer classifies and measures fiber furnish characteristics to optimize paper, board or tissue production.

The user can determine which data should be sent with the standard interfaces (RS232 or Ethernet) of the vision sensor to the OPC client.

The 393 sensor is based on the oscillating piston method, which has only one moving part with no mechanical linkages.

WJ28 series products realize the signal acquisition between sensor and host to measure analog signals.

DIN11 IAP F-P-V (A) series frequency isolation transmitter can change frequency signal to convert the standard isolated output signal in proportion.

CZ-3041-1 improves crane operators' operational awareness, even in hazardous areas.

The pneumatic actuator control valves feature up to three functions in one space saving unit – more than 50 percent smaller than its previous valves with comparable functionality.

ASTUT has a dual-core 1.86GHz Intel Atom Processor D2550 in a fanless enclosure that is equipped with a PCI expansion slot to provide high-computing and reliable performance.

With EtherNet/IP and Modbus TCP protocols, Catalyst can interface and integrate with PLCs, SCADA systems and other devices.

The Series DFMT Digital Paddlewheel Flow Transmitter provides instantaneous as well as totalizing flow monitoring.

Rated for Class 1 Clean Room use, the Flexx-Sil rubber jacketed cables meet the Air Cleanliness Requirements of ISO 146441, and exceed the outgassing requirements of ASTM E595.

The LPC-681 mini PC is powered by a high performance Intel 4th Generation Haswell Core i7-4800MQ mobile processor that will handle most processor intense applications.

The connectors feature high-temperature and low profile ultra-thin devices accommodating boards in thicknesses of 0.031" (0.80 mm), 0.062" (1.60 mm) and 0.093" (2.40 mm).

SPC-2000 has an Intel Quad-Core Atom E3845 1.91GHz processor with 8GB ram, and is capable of operating under wide temperatures from -25°C to +70°C.

The g700 can be used with Lenze’s synchronous and asynchronous servo motors, as well as a single gearbox with a servo motor.

The Mi.Echo system provides utilities with the ability to remotely detect and monitor leaks in water distribution mains.

PCIe-IDIO-24 features 24 optically isolated digital inputs and 24 solid state FET relay outputs, and can be used in any available PCI Express slot.

EQxxxx EtherCAT Box I/O modules are designed for use directly on machines in application areas with demanding hygienic requirements, such as in the food, packaging, chemical and pharmaceutical industries.

C21 Industrial PC has a large 21.5" display in full HD, which makes the touchscreen interface easier to use.

WJ62 series can be used in RS-232/485 bus industrial automation control systems, switching signal measurement, monitoring and control, high and low level signal measurement,industrial field signal isolation and long-term industrial transmission.

IBxxxxS-1W series has a fixed input and regulated single output.

Introducing PULSE by Automation.com, the automation industry's first e-Magazine designed specifically for tablets and smartphones. Download Today !

Thanks to its single-chip SoC design, HU968 saves space and provides connectivity in a small form factor of 95mm x 95mm.

The Compact 200 Series I/O modules are compatible with multiple generations of Foxboro controllers, software and infrastructure, and provide the ability to mix and match I/O types on the same controller.

Dispensers can precisely control up to 5000 CPS viscosity with high speed using the GREY Image Recognition System that ensures precise positioning and dispensing.

Equipped with a 200 MHz, 16-bit A/D, it is ideal for recording signal bandwidths up to 80 MHz with over 80 dB of spurious free dynamic range (SFDR.)

These converters are specifically designed for board level power applications that require small size, robust operation, high input/output isolation levels and low cost.

PC-based controller NIFE 100 series supports seven fieldbus protocols, including PROFINET, PROFIBUS, EtherNet/IP, DeviceNet, EtherCAT, CANopen, and Modbus.

High Integrity (HI) safety system can be used with any ABB or 3rd party control system, PLC or operator interface.

Multisim Touch extends circuit analysis tools to the iPad so users can quickly prove new ideas, design when inspired or complete homework assignments.

Stratix 5100 WAP enables engineers to connect up to 19 IP addresses simultaneously – helping reduce design time when integrating machines and equipment into the industrial control network.

The PJB open frame power supply series now offers 150W output power with 24V output voltage. The power supply comes with universal AC input at 85Vac to 264Vac and built-in active PFC which provides PF >0.98 @ 100Vac.

The RazerCam is a fast smart camera with free programmable FPGA, which allows data to be preprocessed in real time for applications such as contour matching.

The Overview OVD-5521, OVD-4621 and KVD-5521 are ultra-narrow bezel LCD displays that can be powered by an external, redundant power supply.

NEXCOM upgraded the applied panel PC (APPC) series with Intel Atom processor E3800 product family to realize the smart factory envisioned by the Industry 4.0. orking required for smart factory operation.

The PCI Express x1 boards are compatible with the latest versions of Windows, Linux and Unix operating systems, and operate at bi-directional speeds up to 921.6 Kbps.

Available in four gear ratios (5:1, 10:1, 15:1, 25:1), SureGear PGB series gear reducers feature a thread-in mounting style, helical-cut planetary gears for quiet operation, and uncaged needle roller bearings for high rigidity and torque.

U500 can detect transparent, high-gloss and multicolored objects in solid and liquid form at a sensing distance of up to 1,000 mm.

Movicon SCADA/HMI software now supports data exchange via Ethernet with Siemens PLCs, specifically the S7-1200 and 1500 models.

8 channel Current/Voltage signal to RS485/232 Converter with MODBUS RTU

Able to measure tension loads in wireline and slickline applications including well intervention, well logging, and tool retrieval, this unit monitors mast and hook weight up to 40,000 lb.

With Modbus, Voltage Signal to RS485 or RS232 Converter,D/A Converter

DIN11 IAP F-P-V (A) series frequency isolation transmitter, can change frequency signal to convert the standard isolated output signal in proportion.

Speed sensor signal input, shaping square wave signal

4-20mA/0-10V/0-5V signal isolated splitter

DC current/voltage Conditioners(two in two out),can order online by Paypal.

WAYJUN WJ62 series 8-ch DI Isolated Digital Signal to RS485/232 Module has a slim-line plastic housing with integral 35mm DIN rail mounting , terminals, and power supply(8-32VDC)

WAYJUN WJ61 series 16-ch DI Isolated Digital Signal to RS485/232 Module has Slim-line plastic housing with integral 35mm DIN rail mounting , terminals, power supply(8-32VDC)

EarthWorX v10.85 has Automatic 3D Terrain Elevation Drawing, which gives users the ability to select any area of a 2D map and automatically convert it to a 3D terrain in GraphWorX64.

MobileHMI for Water provides a mobile solution with role-based dashboards designed to meet the needs of executives and managers, operators and field service technicians in the water and wastewater industry.